S-1112B16MC-L6BTFU
Product Overview
Category
S-1112B16MC-L6BTFU belongs to the category of voltage regulators.
Use
This product is used for regulating voltage in electronic circuits.
Characteristics
- High precision voltage regulation
- Low dropout voltage
- Low quiescent current
- Thermal shutdown protection
- Short-circuit protection
Package
The S-1112B16MC-L6BTFU comes in a compact surface-mount package.
Essence
The essence of this product lies in its ability to provide stable and regulated voltage output for various electronic applications.
Packaging/Quantity
The S-1112B16MC-L6BTFU is typically packaged in reels containing a specific quantity, usually 3000 units per reel.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage Range: 1.2V - 5.5V
- Maximum Output Current: 100mA
- Dropout Voltage: 160mV (typical)
- Quiescent Current: 30µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The S-1112B16MC-L6BTFU has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
- CE: Chip enable pin
Functional Features
- High precision voltage regulation ensures stable output voltage.
- Low dropout voltage allows efficient operation even with low input voltages.
- Low quiescent current minimizes power consumption during standby or idle states.
- Thermal shutdown protection prevents damage due to excessive heat.
- Short-circuit protection safeguards the regulator and connected components from damage.
Advantages and Disadvantages
Advantages
- High precision voltage regulation ensures reliable performance.
- Low dropout voltage allows for efficient operation in low power scenarios.
- Thermal shutdown protection prevents damage from overheating.
- Short-circuit protection safeguards the circuitry.
Disadvantages
- Limited maximum output current of 100mA may not be suitable for high-power applications.
- Input voltage range is restricted to 2.5V - 6.0V, limiting compatibility with certain systems.
Working Principles
The S-1112B16MC-L6BTFU operates based on the principle of a linear voltage regulator. It takes an input voltage within the specified range and regulates it to provide a stable output voltage. This is achieved by using a feedback mechanism that compares the output voltage to a reference voltage and adjusts the internal circuitry accordingly.
Detailed Application Field Plans
The S-1112B16MC-L6BTFU finds application in various electronic devices and systems, including but not limited to: - Portable consumer electronics - Battery-powered devices - IoT devices - Wearable technology - Industrial control systems - Automotive electronics
Detailed and Complete Alternative Models
- S-1112B16MC-R6BTFU
- S-1112B16MC-L8BTFU
- S-1112B16MC-L5BTFU
- S-1112B16MC-L7BTFU
These alternative models offer similar functionality and characteristics, providing options for different voltage requirements or package types.
In conclusion, the S-1112B16MC-L6BTFU is a voltage regulator that offers high precision voltage regulation, low dropout voltage, and thermal and short-circuit protection. While it has limitations in terms of maximum output current and input voltage range, it finds application in various electronic devices and has alternative models to suit different requirements.
技術ソリューションにおける S-1112B16MC-L6BTFU の適用に関連する 10 件の一般的な質問と回答をリストします。
Sure! Here are 10 common questions and answers related to the application of S-1112B16MC-L6BTFU in technical solutions:
Q: What is S-1112B16MC-L6BTFU? A: S-1112B16MC-L6BTFU is a specific model of voltage regulator IC (integrated circuit) used for regulating power supply voltages in various electronic devices.
Q: What is the input voltage range of S-1112B16MC-L6BTFU? A: The input voltage range of S-1112B16MC-L6BTFU is typically between 2.0V and 6.5V.
Q: What is the output voltage of S-1112B16MC-L6BTFU? A: The output voltage of S-1112B16MC-L6BTFU is fixed at 1.6V.
Q: What is the maximum output current of S-1112B16MC-L6BTFU? A: The maximum output current of S-1112B16MC-L6BTFU is typically around 100mA.
Q: What is the purpose of using S-1112B16MC-L6BTFU in technical solutions? A: S-1112B16MC-L6BTFU is commonly used to provide stable and regulated power supply voltages to sensitive components or circuits in electronic devices, ensuring proper functionality and preventing damage from voltage fluctuations.
Q: Can S-1112B16MC-L6BTFU be used in battery-powered devices? A: Yes, S-1112B16MC-L6BTFU can be used in battery-powered devices as it operates within a wide input voltage range and can efficiently regulate the voltage supplied by batteries.
Q: Is S-1112B16MC-L6BTFU suitable for low-power applications? A: Yes, S-1112B16MC-L6BTFU is suitable for low-power applications as it has a maximum output current of around 100mA.
Q: Does S-1112B16MC-L6BTFU have built-in protection features? A: Yes, S-1112B16MC-L6BTFU typically includes built-in protection features such as overcurrent protection, thermal shutdown, and reverse polarity protection.
Q: Can S-1112B16MC-L6BTFU be used in automotive applications? A: Yes, S-1112B16MC-L6BTFU is designed to meet automotive standards and can be used in automotive applications where regulated power supply voltages are required.
Q: Are there any specific application notes or guidelines available for using S-1112B16MC-L6BTFU? A: Yes, the manufacturer of S-1112B16MC-L6BTFU usually provides application notes and guidelines that outline recommended usage, circuit design considerations, and performance characteristics for optimal application of the IC.