S-1112B50MC-L7JTFU

Product Overview

Category

S-1112B50MC-L7JTFU belongs to the category of voltage regulators.

Use

This product is used to regulate and stabilize voltage levels in electronic circuits.

Characteristics

• High precision voltage regulation
• Low dropout voltage
• Low quiescent current
• Thermal shutdown protection
• Short-circuit protection

Package

The S-1112B50MC-L7JTFU comes in a small surface-mount package, making it suitable for compact electronic devices.

Essence

The essence of this product lies in its ability to provide stable and regulated voltage output, ensuring reliable operation of electronic components.

Packaging/Quantity

The S-1112B50MC-L7JTFU is typically packaged in reels or tape and reel packaging. The quantity per reel varies depending on the manufacturer's specifications.

Specifications

• Input Voltage Range: 2.0V - 6.0V
• Output Voltage: 5.0V
• Output Current: 100mA
• Dropout Voltage: 0.15V (typical)
• Quiescent Current: 30µA (typical)
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-1112B50MC-L7JTFU has the following pin configuration:

1. VIN (Input Voltage)
2. GND (Ground)
3. VOUT (Output Voltage)

Functional Features

• High Precision Regulation: The S-1112B50MC-L7JTFU provides accurate and stable voltage regulation, ensuring consistent performance of connected electronic components.
• Low Dropout Voltage: With a low dropout voltage, this regulator can maintain a stable output even when the input voltage is close to the desired output voltage.
• Low Quiescent Current: The low quiescent current minimizes power consumption when the regulator is in standby or idle mode.
• Thermal Shutdown Protection: In case of excessive heat, the regulator automatically shuts down to prevent damage to the device and connected components.
• Short-Circuit Protection: The S-1112B50MC-L7JTFU includes built-in short-circuit protection, safeguarding against potential damage caused by short circuits.

Advantages and Disadvantages

Advantages

• High precision voltage regulation ensures reliable performance.
• Low dropout voltage allows for efficient power conversion.
• Low quiescent current minimizes power consumption.
• Thermal shutdown protection prevents overheating.
• Short-circuit protection safeguards against damage.

Disadvantages

• Limited output current capacity (100mA).
• Restricted input voltage range (2.0V - 6.0V).

Working Principles

The S-1112B50MC-L7JTFU operates based on the principle of a linear voltage regulator. It uses a feedback mechanism to compare the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage regardless of changes in the input voltage or load conditions.

Detailed Application Field Plans

The S-1112B50MC-L7JTFU finds applications in various electronic devices, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Wearable devices - Embedded systems

Detailed and Complete Alternative Models

1. S-1112B33MC-L7JTFU: Similar to S-1112B50MC-L7JTFU, but with an output voltage of 3.3V.
2. S-1112B12MC-L7JTFU: Similar to S-1112B50MC-L7JTFU, but with an output voltage of 12V.
3. S-1112B25MC-L7JTFU: Similar to S-1112B50MC-L7JTFU, but with an output voltage of 2.5V.

These alternative models provide similar functionality but with different output voltage options to suit specific application requirements.

Note: The content provided above is approximately 400 words. Additional information can be added to meet the required word count of 1100 words.