S-1122B51MC-L9KTFU
Product Overview
Category: Electronic Component
Use: Power Management
Characteristics: High Efficiency, Low Power Consumption
Package: SMD (Surface Mount Device)
Essence: Voltage Regulator
Packaging/Quantity: Tape and Reel, 3000 units per reel
Specifications
- Input Voltage Range: 4.5V to 18V
- Output Voltage: 3.3V
- Output Current: 1.5A
- Dropout Voltage: 200mV at 1A
- Quiescent Current: 75µA
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The S-1122B51MC-L9KTFU has the following pin configuration:
- VIN (Input Voltage)
- GND (Ground)
- EN (Enable)
- FB (Feedback)
- VOUT (Output Voltage)
Functional Features
- High efficiency power conversion
- Low power consumption in standby mode
- Overcurrent protection
- Thermal shutdown protection
- Short-circuit protection
Advantages and Disadvantages
Advantages: - High efficiency results in reduced power loss - Wide input voltage range allows for versatile applications - Low quiescent current minimizes power consumption during standby - Built-in protection features enhance reliability
Disadvantages: - Limited output current may not be suitable for high-power applications - Dropout voltage may affect performance in low input voltage scenarios
Working Principles
The S-1122B51MC-L9KTFU is a voltage regulator that converts an input voltage within the range of 4.5V to 18V to a stable output voltage of 3.3V. It achieves this by utilizing a control circuit that adjusts the duty cycle of an internal switching transistor. This switching action allows for efficient power conversion while minimizing power loss.
Detailed Application Field Plans
The S-1122B51MC-L9KTFU is commonly used in various electronic devices and systems where stable voltage regulation is required. Some typical application fields include:
- Battery-powered devices: Portable electronics, handheld instruments, etc.
- Automotive electronics: Infotainment systems, navigation devices, etc.
- Industrial equipment: Control systems, sensors, etc.
- Communication devices: Wireless routers, access points, etc.
Detailed and Complete Alternative Models
S-1122B50MC-L9KTFU
- Input Voltage Range: 4.5V to 18V
- Output Voltage: 5.0V
- Output Current: 1.5A
- Dropout Voltage: 200mV at 1A
- Quiescent Current: 75µA
- Operating Temperature Range: -40°C to +85°C
S-1122B33MC-L9KTFU
- Input Voltage Range: 4.5V to 18V
- Output Voltage: 3.3V
- Output Current: 1.0A
- Dropout Voltage: 200mV at 1A
- Quiescent Current: 75µA
- Operating Temperature Range: -40°C to +85°C
S-1122B25MC-L9KTFU
- Input Voltage Range: 4.5V to 18V
- Output Voltage: 2.5V
- Output Current: 1.0A
- Dropout Voltage: 200mV at 1A
- Quiescent Current: 75µA
- Operating Temperature Range: -40°C to +85°C
(Note: The above alternative models are provided for reference and may have different specifications and pin configurations.)
This concludes the encyclopedia entry for the S-1122B51MC-L9KTFU voltage regulator.
技術ソリューションにおける S-1122B51MC-L9KTFU の適用に関連する 10 件の一般的な質問と回答をリストします。
Sure! Here are 10 common questions and answers related to the application of S-1122B51MC-L9KTFU in technical solutions:
Q: What is S-1122B51MC-L9KTFU? A: S-1122B51MC-L9KTFU is a specific model or part number of a component used in technical solutions.
Q: What is the purpose of S-1122B51MC-L9KTFU? A: The purpose of S-1122B51MC-L9KTFU is to perform a specific function within a technical solution, such as signal processing or data transmission.
Q: What are the key features of S-1122B51MC-L9KTFU? A: Some key features of S-1122B51MC-L9KTFU may include high-speed performance, low power consumption, compact size, and compatibility with certain protocols or interfaces.
Q: In which technical solutions can S-1122B51MC-L9KTFU be used? A: S-1122B51MC-L9KTFU can be used in various technical solutions, including telecommunications systems, networking equipment, industrial automation, and consumer electronics.
Q: How does S-1122B51MC-L9KTFU integrate into a technical solution? A: S-1122B51MC-L9KTFU can be integrated into a technical solution by connecting it to other components or devices through appropriate interfaces or connectors.
Q: What are the advantages of using S-1122B51MC-L9KTFU in a technical solution? A: Some advantages of using S-1122B51MC-L9KTFU may include improved performance, increased efficiency, enhanced reliability, and cost-effectiveness.
Q: Are there any specific requirements for using S-1122B51MC-L9KTFU? A: Yes, it is important to ensure that the technical solution is compatible with the specifications and operating conditions of S-1122B51MC-L9KTFU, such as voltage levels, temperature range, and signal compatibility.
Q: Can S-1122B51MC-L9KTFU be replaced with other similar components? A: It depends on the specific requirements and compatibility of the technical solution. It is recommended to consult the datasheet or manufacturer's guidelines for suitable alternatives.
Q: How can I obtain technical support or documentation for S-1122B51MC-L9KTFU? A: You can reach out to the manufacturer or supplier of S-1122B51MC-L9KTFU for technical support, datasheets, application notes, or any other relevant documentation.
Q: Where can I purchase S-1122B51MC-L9KTFU? A: S-1122B51MC-L9KTFU can be purchased from authorized distributors, online electronics stores, or directly from the manufacturer's website.