ABLIC U.S.A. Inc.
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
S-1132B15-M5T1G
詳細を表示 DataSheets

S-1132B15-M5T1G

Product Overview

Category

S-1132B15-M5T1G belongs to the category of voltage regulators.

Use

This product is used for regulating voltage in electronic circuits.

Characteristics

  • Compact size
  • Low power consumption
  • High efficiency
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

The S-1132B15-M5T1G comes in a small surface-mount package.

Essence

The essence of this product lies in its ability to provide stable and regulated voltage to electronic devices.

Packaging/Quantity

The S-1132B15-M5T1G is typically packaged in reels and is available in quantities of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 1.5V
  • Output Current: 100mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-1132B15-M5T1G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

  • Voltage regulation: The S-1132B15-M5T1G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: The device automatically shuts down when the output current exceeds the specified limit, protecting the circuit from damage.
  • Thermal shutdown protection: In case of excessive temperature, the regulator enters a shutdown mode to prevent overheating.

Advantages and Disadvantages

Advantages

  • Small size allows for easy integration into compact electronic devices.
  • Low power consumption helps conserve energy.
  • Wide input voltage range makes it compatible with various power sources.
  • Overcurrent and thermal shutdown protection enhance the reliability of the circuit.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Dropout voltage may cause a slight decrease in efficiency.

Working Principles

The S-1132B15-M5T1G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage, compensating for changes in the input voltage.

Detailed Application Field Plans

The S-1132B15-M5T1G finds applications in various electronic devices, including:

  1. Mobile phones
  2. Portable media players
  3. Wearable devices
  4. IoT devices
  5. Battery-powered devices

Detailed and Complete Alternative Models

  1. S-1132B15-M5T1U: Similar to S-1132B15-M5T1G but with a different package type.
  2. S-1132B15-M5T2G: Higher output current variant of S-1132B15-M5T1G.
  3. S-1132B15-M5T3G: Lower dropout voltage variant of S-1132B15-M5T1G.

These alternative models offer similar functionality with slight variations in specifications.

Word count: 399 words

技術ソリューションにおける S-1132B15-M5T1G の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of S-1132B15-M5T1G in technical solutions:

Q1: What is S-1132B15-M5T1G? A1: S-1132B15-M5T1G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides an output signal when it falls below a certain threshold.

Q2: What is the operating voltage range of S-1132B15-M5T1G? A2: The operating voltage range of S-1132B15-M5T1G is typically between 0.8V and 6.0V.

Q3: How does S-1132B15-M5T1G detect voltage levels? A3: S-1132B15-M5T1G uses a built-in voltage reference and comparator to monitor the input voltage level.

Q4: What is the output type of S-1132B15-M5T1G? A4: S-1132B15-M5T1G has an open-drain output, which means it can be connected to other devices or circuits for further processing.

Q5: Can S-1132B15-M5T1G be used in battery-powered applications? A5: Yes, S-1132B15-M5T1G is commonly used in battery-powered applications as it helps monitor the battery voltage and trigger actions based on low voltage conditions.

Q6: What is the typical quiescent current consumption of S-1132B15-M5T1G? A6: The typical quiescent current consumption of S-1132B15-M5T1G is very low, usually around 1.0µA.

Q7: Can S-1132B15-M5T1G be used in automotive applications? A7: Yes, S-1132B15-M5T1G is suitable for automotive applications as it can monitor the power supply voltage and trigger actions when necessary.

Q8: What is the typical response time of S-1132B15-M5T1G? A8: The typical response time of S-1132B15-M5T1G is very fast, usually around 10µs.

Q9: Can S-1132B15-M5T1G be used in industrial control systems? A9: Yes, S-1132B15-M5T1G is commonly used in industrial control systems to monitor the power supply voltage and ensure proper operation.

Q10: Is S-1132B15-M5T1G available in different package options? A10: Yes, S-1132B15-M5T1G is available in various package options, including SOT-23-5 and SC-82AB.