ABLIC U.S.A. Inc.
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
S-1132B17-I6T2U
詳細を表示 DataSheets

S-1132B17-I6T2U

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: Low Dropout Voltage Regulator
  • Package: SOT-23-5
  • Essence: Voltage Regulator IC
  • Packaging/Quantity: Tape and Reel, 3000 pieces per reel

Specifications

  • Input Voltage Range: 2.0V to 6.0V
  • Output Voltage Range: 1.2V to 5.5V
  • Maximum Output Current: 150mA
  • Dropout Voltage: 160mV @ 100mA
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-1132B17-I6T2U has a total of 5 pins: 1. VIN: Input voltage pin 2. GND: Ground pin 3. CE: Chip enable pin 4. VOUT: Output voltage pin 5. NC: No connection pin

Functional Features

  • Low dropout voltage: The S-1132B17-I6T2U exhibits a low dropout voltage of only 160mV at 100mA output current, ensuring efficient power conversion.
  • Low quiescent current: With a typical quiescent current of 30µA, this IC minimizes power consumption during standby or idle mode.
  • Overcurrent protection: The device incorporates overcurrent protection, safeguarding the circuit from excessive current flow and potential damage.
  • Thermal shutdown protection: In case of excessive temperature rise, the IC automatically shuts down to prevent overheating and subsequent failure.

Advantages and Disadvantages

Advantages: - Low dropout voltage ensures efficient power conversion. - Low quiescent current minimizes power consumption. - Overcurrent and thermal shutdown protection enhance reliability.

Disadvantages: - Limited maximum output current of 150mA may not be suitable for high-power applications. - Restricted input voltage range of 2.0V to 6.0V may limit compatibility with certain systems.

Working Principles

The S-1132B17-I6T2U is a low dropout voltage regulator IC that regulates the output voltage based on the input voltage. It utilizes a feedback mechanism to maintain a stable output voltage, compensating for variations in the input voltage and load conditions. The internal circuitry ensures efficient power conversion while minimizing power dissipation and heat generation.

Detailed Application Field Plans

The S-1132B17-I6T2U finds application in various electronic devices and systems, including but not limited to: 1. Battery-powered portable devices: This IC can be used to regulate the voltage supplied to microcontrollers, sensors, and other components in smartphones, tablets, and wearable devices. 2. IoT (Internet of Things) devices: The low quiescent current and small form factor make it suitable for powering low-power IoT devices such as smart sensors, wireless modules, and home automation systems. 3. Automotive electronics: The S-1132B17-I6T2U can be employed in automotive applications like infotainment systems, dashboard displays, and control units, where stable and efficient power supply is crucial.

Detailed and Complete Alternative Models

  1. S-1132B17-M6T2U: Similar to S-1132B17-I6T2U, but with a different package (SOT-23-5).
  2. S-1132B17-U6T2U: Similar to S-1132B17-I6T2U, but with a wider input voltage range (2.0V to 8.0V).
  3. S-1132B17-H6T2U: Similar to S-1132B17-I6T2U, but with a higher maximum output current (300mA).

Note: These alternative models offer similar functionality and characteristics, providing flexibility in choosing the most suitable option for specific applications.

Word count: 446 words

技術ソリューションにおける S-1132B17-I6T2U の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of S-1132B17-I6T2U in technical solutions:

  1. Q: What is S-1132B17-I6T2U? A: S-1132B17-I6T2U is a specific model or part number of a component used in technical solutions, such as electronic circuits or systems.

  2. Q: What is the purpose of S-1132B17-I6T2U? A: The purpose of S-1132B17-I6T2U is to provide voltage regulation or power management capabilities within a technical solution.

  3. Q: How does S-1132B17-I6T2U work? A: S-1132B17-I6T2U works by regulating the input voltage and providing a stable output voltage, ensuring that the connected components receive consistent power.

  4. Q: What are the key features of S-1132B17-I6T2U? A: Some key features of S-1132B17-I6T2U may include low dropout voltage, high efficiency, overcurrent protection, thermal shutdown, and small form factor.

  5. Q: What is the input voltage range for S-1132B17-I6T2U? A: The input voltage range for S-1132B17-I6T2U typically varies, but it can be around 2.5V to 6.0V, depending on the specific model.

  6. Q: What is the output voltage of S-1132B17-I6T2U? A: The output voltage of S-1132B17-I6T2U is fixed and usually set at a specific value, such as 3.3V or 5.0V, depending on the model.

  7. Q: Can S-1132B17-I6T2U handle high current loads? A: Yes, S-1132B17-I6T2U can handle moderate to high current loads, typically up to a few hundred milliamperes (mA), but it's always recommended to check the datasheet for specific details.

  8. Q: Is S-1132B17-I6T2U suitable for battery-powered applications? A: Yes, S-1132B17-I6T2U is often used in battery-powered applications due to its low dropout voltage and efficient power management capabilities.

  9. Q: Are there any specific precautions when using S-1132B17-I6T2U? A: It's important to follow the manufacturer's guidelines and datasheet recommendations for proper usage, including input/output voltage limits, thermal considerations, and PCB layout guidelines.

  10. Q: Where can I find more information about S-1132B17-I6T2U? A: You can find more detailed information about S-1132B17-I6T2U in the product datasheet provided by the manufacturer or by contacting their technical support team.