S-1132B43-M5T1G

Product Overview

Category

S-1132B43-M5T1G belongs to the category of voltage regulators.

Use

This product is primarily used for regulating voltage in electronic circuits.

Characteristics

• Compact size
• High efficiency
• Low dropout voltage
• Wide input voltage range
• Overcurrent protection
• Thermal shutdown protection

Package

The S-1132B43-M5T1G comes in a small surface-mount package.

Essence

The essence of this product lies in its ability to provide stable and regulated voltage to electronic devices, ensuring their proper functioning.

Packaging/Quantity

The S-1132B43-M5T1G is typically packaged in reels and is available in quantities of 3000 units per reel.

Specifications

• Input Voltage Range: 2.0V - 6.0V
• Output Voltage: 3.3V
• Output Current: 150mA
• Dropout Voltage: 200mV (typical)
• Quiescent Current: 30µA (typical)
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-1132B43-M5T1G has the following pin configuration:

1. VIN (Input Voltage)
2. GND (Ground)
3. VOUT (Output Voltage)

Functional Features

• Voltage regulation: The S-1132B43-M5T1G ensures a stable output voltage regardless of variations in the input voltage.
• Overcurrent protection: It incorporates overcurrent protection to safeguard connected devices from excessive current flow.
• Thermal shutdown protection: In case of excessive temperature, the regulator shuts down to prevent damage.

Advantages and Disadvantages

Advantages

• Small size allows for easy integration into compact electronic devices.
• High efficiency results in minimal power loss during voltage regulation.
• Wide input voltage range makes it compatible with various power sources.

Disadvantages

• Limited output current capacity may not be suitable for high-power applications.
• Dropout voltage of 200mV may affect the performance of low-power devices.

Working Principles

The S-1132B43-M5T1G operates based on the principle of a linear voltage regulator. It uses a feedback mechanism to maintain a constant output voltage, compensating for changes in the input voltage and load conditions. By comparing the output voltage with a reference voltage, the regulator adjusts its internal circuitry to provide the desired output voltage.

Detailed Application Field Plans

The S-1132B43-M5T1G finds application in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wireless communication modules - Wearable devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to the S-1132B43-M5T1G are: - S-1132B33-M5T1G: Similar specifications but with an output voltage of 3.3V - S-1132B50-M5T1G: Higher output current capacity of 500mA - S-1132B25-M5T1G: Lower dropout voltage of 100mV

These alternative models offer different features and specifications to cater to specific requirements.

In conclusion, the S-1132B43-M5T1G is a compact and efficient voltage regulator that provides stable voltage output for various electronic devices. Its wide input voltage range, overcurrent protection, and thermal shutdown protection make it a reliable choice for many applications. However, its limited output current capacity and dropout voltage should be considered when selecting the appropriate model for specific requirements.