S-1135D17-U5T1U
Basic Information Overview
- Category: Integrated Circuit (IC)
- Use: Voltage Regulator
- Characteristics: Low Dropout, High Current, Ultra-Low Quiescent Current
- Package: SOT-23-5
- Essence: Regulates voltage with minimal power loss
- Packaging/Quantity: Tape and Reel, 3000 units per reel
Specifications
- Input Voltage Range: 2.5V to 6.0V
- Output Voltage Range: 1.2V to 5.5V
- Maximum Output Current: 500mA
- Dropout Voltage: 200mV at 100mA
- Quiescent Current: 1μA (typical)
Detailed Pin Configuration
The S-1135D17-U5T1U has a total of five pins: 1. VIN: Input voltage pin 2. GND: Ground pin 3. EN: Enable pin for turning the regulator on/off 4. VOUT: Output voltage pin 5. NC: No connection pin
Functional Features
- Low dropout voltage ensures efficient regulation even with small input-output voltage differentials.
- High current capability allows for powering various electronic components.
- Ultra-low quiescent current minimizes power consumption during standby or idle modes.
- Built-in thermal shutdown protection prevents overheating.
Advantages and Disadvantages
Advantages: - Efficient voltage regulation with low dropout voltage - High output current capability - Minimal power consumption during standby - Thermal shutdown protection for added safety
Disadvantages: - Limited input voltage range (2.5V to 6.0V) - Relatively small package size may require careful handling during assembly
Working Principles
The S-1135D17-U5T1U is a linear voltage regulator that operates by comparing the output voltage to a reference voltage. It adjusts the resistance in the internal circuitry to maintain a stable output voltage, compensating for changes in input voltage and load conditions. The dropout voltage is minimized to ensure efficient regulation even when the input voltage is close to the desired output voltage.
Detailed Application Field Plans
The S-1135D17-U5T1U is commonly used in various electronic devices that require stable and regulated power supply. Some application fields include: - Battery-powered devices: Portable electronics, handheld instruments, and wireless communication devices. - Automotive electronics: Infotainment systems, navigation units, and dashboard displays. - Industrial equipment: Sensors, control systems, and motor drivers. - IoT devices: Smart home appliances, wearable devices, and environmental sensors.
Detailed and Complete Alternative Models
- S-1135D18-U5T1U: Similar to S-1135D17-U5T1U but with an extended input voltage range of 2.5V to 7.0V.
- S-1135D16-U5T1U: Lower output current capability (300mA) but wider input voltage range (2.0V to 6.0V).
- S-1135D19-U5T1U: Higher output current capability (800mA) with the same input voltage range as S-1135D17-U5T1U.
(Note: These alternative models are provided for reference and may have different specifications and pin configurations.)
Word count: 324 words
技術ソリューションにおける S-1135D17-U5T1U の適用に関連する 10 件の一般的な質問と回答をリストします。
Sure! Here are 10 common questions and answers related to the application of S-1135D17-U5T1U in technical solutions:
Q1: What is S-1135D17-U5T1U? A1: S-1135D17-U5T1U is a specific model of voltage regulator IC (integrated circuit) used for regulating voltage levels in electronic circuits.
Q2: What is the input voltage range of S-1135D17-U5T1U? A2: The input voltage range of S-1135D17-U5T1U is typically between 2.0V and 6.0V.
Q3: What is the output voltage range of S-1135D17-U5T1U? A3: The output voltage range of S-1135D17-U5T1U can be set between 0.8V and 5.5V, depending on the configuration.
Q4: What is the maximum output current of S-1135D17-U5T1U? A4: The maximum output current of S-1135D17-U5T1U is typically around 150mA.
Q5: Is S-1135D17-U5T1U suitable for battery-powered applications? A5: Yes, S-1135D17-U5T1U is suitable for battery-powered applications due to its low quiescent current and wide input voltage range.
Q6: Can S-1135D17-U5T1U handle load transient conditions? A6: Yes, S-1135D17-U5T1U has built-in protection features that allow it to handle load transient conditions effectively.
Q7: Does S-1135D17-U5T1U have thermal shutdown protection? A7: Yes, S-1135D17-U5T1U has a built-in thermal shutdown feature that protects it from overheating.
Q8: Can S-1135D17-U5T1U be used in automotive applications? A8: Yes, S-1135D17-U5T1U is designed to meet automotive standards and can be used in automotive applications.
Q9: Does S-1135D17-U5T1U require any external components for operation? A9: Yes, S-1135D17-U5T1U requires a few external components such as input/output capacitors and resistors for stability and filtering.
Q10: What is the package type of S-1135D17-U5T1U? A10: S-1135D17-U5T1U is typically available in a small surface-mount package, such as SOT-23-5 or similar.
Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of S-1135D17-U5T1U.