S-1137A15-U5T1G
Basic Information Overview
- Category: Electronic Component
- Use: Voltage Regulator
- Characteristics: Low Dropout, High Current Capability
- Package: SOT-23-5
- Essence: Regulates voltage to ensure stable power supply
- Packaging/Quantity: Tape and Reel, 3000 units per reel
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage Range: 1.2V - 5.5V
- Dropout Voltage: 200mV @ 500mA
- Maximum Output Current: 1.5A
- Line Regulation: ±0.05% (Typical)
- Load Regulation: ±0.3% (Typical)
- Quiescent Current: 75µA (Typical)
Detailed Pin Configuration
The S-1137A15-U5T1G has a total of five pins: 1. VIN: Input Voltage Pin 2. GND: Ground Pin 3. EN: Enable Pin 4. VOUT: Output Voltage Pin 5. NC: No Connection Pin
Functional Features
- Low dropout voltage ensures efficient power conversion.
- High current capability allows for powering various electronic devices.
- Enable pin provides control over the regulator's operation.
- Excellent line and load regulation ensures stable output voltage.
Advantages
- Wide input voltage range enables compatibility with different power sources.
- Low quiescent current minimizes power consumption in standby mode.
- Compact SOT-23-5 package saves board space.
- Good thermal characteristics prevent overheating.
Disadvantages
- Limited maximum output current may not be suitable for high-power applications.
- Dropout voltage may cause a slight decrease in efficiency.
Working Principles
The S-1137A15-U5T1G is a linear voltage regulator that operates by comparing the output voltage to a reference voltage. It adjusts the resistance in the internal circuitry to maintain a stable output voltage, even when the input voltage fluctuates.
Detailed Application Field Plans
The S-1137A15-U5T1G is commonly used in various electronic devices, including: - Mobile phones - Tablets - Portable media players - Digital cameras - Wireless communication modules
Detailed and Complete Alternative Models
- S-1137A18-U5T1G: Similar specifications but with a higher maximum output current of 1.8A.
- S-1137A12-U5T1G: Similar specifications but with a lower maximum output current of 1.2A.
- S-1137A25-U5T1G: Similar specifications but with a higher output voltage range of 1.2V - 5.5V.
Note: These alternative models are suggested based on similar characteristics and package type.
In conclusion, the S-1137A15-U5T1G is a voltage regulator with low dropout and high current capability. Its compact size and excellent regulation make it suitable for various portable electronic devices. However, its limited maximum output current and dropout voltage should be considered for specific applications.
技術ソリューションにおける S-1137A15-U5T1G の適用に関連する 10 件の一般的な質問と回答をリストします。
Sure! Here are 10 common questions and answers related to the application of S-1137A15-U5T1G in technical solutions:
Q1: What is S-1137A15-U5T1G? A1: S-1137A15-U5T1G is a specific model or part number of a component used in technical solutions. It could be a voltage regulator, transistor, or any other electronic component.
Q2: What is the purpose of S-1137A15-U5T1G? A2: The purpose of S-1137A15-U5T1G is to regulate voltage levels within a circuit or system. It ensures that the output voltage remains stable and within the desired range.
Q3: What is the input voltage range for S-1137A15-U5T1G? A3: The input voltage range for S-1137A15-U5T1G is typically specified in the datasheet. It can vary depending on the specific model, but it is usually between a certain minimum and maximum voltage.
Q4: What is the output voltage of S-1137A15-U5T1G? A4: The output voltage of S-1137A15-U5T1G is also specified in the datasheet. It is a fixed voltage value that remains constant regardless of changes in the input voltage.
Q5: Can S-1137A15-U5T1G handle high current loads? A5: The current handling capability of S-1137A15-U5T1G is mentioned in the datasheet. It is important to ensure that the component can handle the required current load in your specific application.
Q6: Is S-1137A15-U5T1G suitable for automotive applications? A6: Some versions of S-1137A15-U5T1G may be designed for automotive applications, but it is essential to check the datasheet or consult with the manufacturer to confirm its suitability.
Q7: Does S-1137A15-U5T1G have built-in protection features? A7: The presence of built-in protection features such as overcurrent protection, thermal shutdown, or reverse polarity protection varies depending on the specific model. The datasheet will provide information about the available protection features.
Q8: Can S-1137A15-U5T1G operate in a wide temperature range? A8: The operating temperature range of S-1137A15-U5T1G is specified in the datasheet. It is important to ensure that the component can withstand the temperature conditions in your application environment.
Q9: What package options are available for S-1137A15-U5T1G? A9: S-1137A15-U5T1G may come in different package options such as surface mount (SMD) or through-hole. The datasheet will provide details about the available package options.
Q10: Where can I purchase S-1137A15-U5T1G? A10: S-1137A15-U5T1G can be purchased from authorized distributors, online electronics stores, or directly from the manufacturer. Check the manufacturer's website or contact their sales team for more information.
Please note that the answers provided here are general and may vary depending on the specific model and manufacturer of S-1137A15-U5T1G. Always refer to the datasheet and consult with the manufacturer for accurate and up-to-date information.