S-1137B16-U5T1U
Basic Information Overview
- Category: Electronic Component
- Use: Voltage Regulator
- Characteristics: High efficiency, low dropout voltage, compact size
- Package: SOT-23-5
- Essence: Regulates input voltage to a stable output voltage
- Packaging/Quantity: Tape and Reel, 3000 units per reel
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage Range: 1.2V - 5.5V
- Dropout Voltage: 200mV (typical)
- Maximum Output Current: 150mA
- Quiescent Current: 40µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The S-1137B16-U5T1U has a total of 5 pins: 1. VIN: Input voltage pin 2. GND: Ground pin 3. EN: Enable pin 4. VOUT: Output voltage pin 5. NC: No connection pin
Functional Features
- Low dropout voltage ensures efficient power conversion
- Wide input voltage range allows for versatile applications
- Low quiescent current minimizes power consumption
- Short-circuit protection prevents damage to the device
- Thermal shutdown protection safeguards against overheating
Advantages and Disadvantages
Advantages: - High efficiency - Compact size - Wide input voltage range - Short-circuit and thermal protection
Disadvantages: - Limited maximum output current (150mA) - Not suitable for high-power applications
Working Principles
The S-1137B16-U5T1U is a linear voltage regulator that uses a pass transistor to regulate the input voltage to a stable output voltage. It operates by comparing the output voltage with a reference voltage and adjusting the pass transistor accordingly. The dropout voltage is minimized to ensure efficient power conversion.
Detailed Application Field Plans
The S-1137B16-U5T1U is commonly used in various electronic devices that require a stable and regulated power supply. Some of its application fields include: - Battery-powered devices - Portable consumer electronics - IoT devices - Medical equipment - Industrial control systems
Detailed and Complete Alternative Models
- S-1137B18-U5T1U: Similar specifications, but with higher maximum output current (180mA)
- S-1137B15-U5T1U: Similar specifications, but with lower dropout voltage (150mV)
- S-1137B20-U5T1U: Similar specifications, but with wider input voltage range (2.0V - 6.5V)
(Note: These alternative models are for illustrative purposes only and may not represent all available options.)
This entry provides an overview of the S-1137B16-U5T1U voltage regulator, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.
技術ソリューションにおける S-1137B16-U5T1U の適用に関連する 10 件の一般的な質問と回答をリストします。
Sure! Here are 10 common questions and answers related to the application of S-1137B16-U5T1U in technical solutions:
Q1: What is S-1137B16-U5T1U? A1: S-1137B16-U5T1U is a specific model or component used in technical solutions, typically in electronic circuits or power management systems.
Q2: What is the purpose of S-1137B16-U5T1U? A2: The purpose of S-1137B16-U5T1U is to regulate voltage levels, provide protection against overvoltage, undervoltage, and short circuits, and ensure stable power supply to connected devices.
Q3: What are the key features of S-1137B16-U5T1U? A3: Some key features of S-1137B16-U5T1U include low dropout voltage, high accuracy, thermal shutdown protection, and current limit protection.
Q4: What is the input voltage range for S-1137B16-U5T1U? A4: The input voltage range for S-1137B16-U5T1U typically varies between 2.0V and 6.0V.
Q5: What is the output voltage range for S-1137B16-U5T1U? A5: The output voltage range for S-1137B16-U5T1U can be adjusted using external resistors, but it typically ranges from 1.2V to 5.0V.
Q6: How much current can S-1137B16-U5T1U handle? A6: S-1137B16-U5T1U can handle a maximum current of around 1.0A, depending on the specific model and operating conditions.
Q7: Is S-1137B16-U5T1U suitable for battery-powered applications? A7: Yes, S-1137B16-U5T1U is suitable for battery-powered applications as it has a low dropout voltage, which means it can operate efficiently even with lower input voltages.
Q8: Does S-1137B16-U5T1U have any built-in protection mechanisms? A8: Yes, S-1137B16-U5T1U has built-in protection mechanisms such as overcurrent protection, thermal shutdown protection, and short circuit protection.
Q9: Can S-1137B16-U5T1U be used in automotive applications? A9: Yes, S-1137B16-U5T1U is often used in automotive applications due to its ability to handle wide temperature ranges and provide stable power supply to various components.
Q10: Are there any recommended external components to use with S-1137B16-U5T1U? A10: It is recommended to use input/output capacitors and resistors as specified in the datasheet of S-1137B16-U5T1U to ensure proper stability and performance.