ABLIC U.S.A. Inc.
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
S-1137D20-I6T2U
詳細を表示 DataSheets

S-1137D20-I6T2U

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High efficiency, low power consumption
  • Package: D20 package
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 18V
  • Output Voltage Range: 0.8V to 5.5V
  • Output Current: 2A
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 50μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. VOUT: Output voltage pin

Functional Features

  • High efficiency conversion
  • Low power consumption in standby mode
  • Overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection

Advantages

  • Wide input voltage range allows for versatile applications
  • High efficiency results in reduced power loss
  • Low quiescent current prolongs battery life
  • Compact D20 package saves board space
  • Robust protection features ensure reliable operation

Disadvantages

  • Limited output current may not be suitable for high-power applications
  • Dropout voltage may affect performance in low input voltage scenarios

Working Principles

The S-1137D20-I6T2U is a voltage regulator IC that converts an input voltage within the range of 4.5V to 18V into a regulated output voltage between 0.8V and 5.5V. It utilizes a switching regulator topology to achieve high efficiency conversion while minimizing power loss. The IC incorporates various protection features such as overcurrent, thermal shutdown, and short-circuit protection to ensure safe operation.

Detailed Application Field Plans

The S-1137D20-I6T2U is commonly used in a wide range of applications that require efficient power management. Some typical application fields include: 1. Portable electronic devices: Smartphones, tablets, portable gaming consoles 2. Industrial equipment: Automation systems, motor control, LED lighting 3. Automotive electronics: Infotainment systems, navigation devices, lighting control

Detailed and Complete Alternative Models

  1. S-1137D18-I6T2U: Similar specifications but with an input voltage range of 4.5V to 16V.
  2. S-1137D25-I6T2U: Similar specifications but with an input voltage range of 4.5V to 24V.
  3. S-1137D30-I6T2U: Similar specifications but with an input voltage range of 4.5V to 29V.

(Note: This list is not exhaustive and there may be other alternative models available.)

This concludes the encyclopedia entry for the S-1137D20-I6T2U voltage regulator IC.

技術ソリューションにおける S-1137D20-I6T2U の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of S-1137D20-I6T2U in technical solutions:

  1. Q: What is S-1137D20-I6T2U? A: S-1137D20-I6T2U is a specific model or part number of a component used in technical solutions, typically in electronic circuits.

  2. Q: What is the purpose of S-1137D20-I6T2U? A: The purpose of S-1137D20-I6T2U is to regulate voltage levels within a circuit, ensuring stable and reliable power supply to other components.

  3. Q: What are the key features of S-1137D20-I6T2U? A: Some key features of S-1137D20-I6T2U include low dropout voltage, high output current capability, thermal shutdown protection, and overcurrent protection.

  4. Q: How do I connect S-1137D20-I6T2U in my circuit? A: S-1137D20-I6T2U is typically connected between the power source and the load, with appropriate input and output capacitors for stability.

  5. Q: What is the maximum input voltage supported by S-1137D20-I6T2U? A: The maximum input voltage supported by S-1137D20-I6T2U is typically mentioned in the datasheet, but it is usually around 20V.

  6. Q: Can S-1137D20-I6T2U handle high currents? A: Yes, S-1137D20-I6T2U is designed to handle relatively high output currents, typically up to several hundred milliamperes.

  7. Q: Does S-1137D20-I6T2U require any external components for operation? A: Yes, S-1137D20-I6T2U requires input and output capacitors to ensure stability and proper functioning.

  8. Q: Is S-1137D20-I6T2U suitable for battery-powered applications? A: Yes, S-1137D20-I6T2U is often used in battery-powered applications due to its low dropout voltage, which allows efficient utilization of the available battery power.

  9. Q: What are the typical applications of S-1137D20-I6T2U? A: S-1137D20-I6T2U is commonly used in various electronic devices, such as mobile phones, portable media players, digital cameras, and other battery-powered devices.

  10. Q: Where can I find more information about S-1137D20-I6T2U? A: You can find more detailed information about S-1137D20-I6T2U in its datasheet, which is usually available on the manufacturer's website or through authorized distributors.

Please note that the specific details may vary depending on the manufacturer and the application requirements. It's always recommended to refer to the datasheet and consult with technical experts for accurate information.