S-1142A27I-E6T1U
Product Overview
Category
S-1142A27I-E6T1U belongs to the category of voltage regulators.
Use
This product is primarily used for regulating voltage in electronic circuits.
Characteristics
- Package: SOT-23-5
- Essence: Low dropout voltage regulator
- Packaging/Quantity: Tape and reel, 3000 units per reel
Specifications
The specifications of S-1142A27I-E6T1U are as follows:
- Input Voltage Range: 2.0V to 6.0V
- Output Voltage Range: 1.8V to 5.0V
- Dropout Voltage: 200mV (typical)
- Output Current: 100mA (maximum)
- Quiescent Current: 30µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The pin configuration of S-1142A27I-E6T1U is as follows:
- VIN (Input Voltage)
- GND (Ground)
- VOUT (Output Voltage)
- CE (Control Enable)
- NC (No Connection)
Functional Features
- Low dropout voltage: The S-1142A27I-E6T1U exhibits a low dropout voltage, ensuring efficient voltage regulation even when the input voltage is close to the desired output voltage.
- Low quiescent current: With a typical quiescent current of only 30µA, this voltage regulator minimizes power consumption in standby or idle modes.
- Overcurrent protection: The device incorporates overcurrent protection, safeguarding the circuit from excessive current flow and potential damage.
- Thermal shutdown protection: In case of excessive temperature, the S-1142A27I-E6T1U features thermal shutdown protection, preventing overheating and ensuring safe operation.
Advantages and Disadvantages
Advantages
- Low dropout voltage ensures efficient voltage regulation.
- Low quiescent current minimizes power consumption.
- Overcurrent protection safeguards the circuit.
- Thermal shutdown protection prevents overheating.
Disadvantages
- Limited output current of 100mA may not be suitable for high-power applications.
- Input voltage range is limited to 2.0V to 6.0V.
Working Principles
The S-1142A27I-E6T1U operates based on the principle of a linear voltage regulator. It regulates the output voltage by maintaining a constant voltage drop across its internal pass transistor. This ensures that the output voltage remains stable even when the input voltage fluctuates within the specified range.
Detailed Application Field Plans
The S-1142A27I-E6T1U finds application in various electronic devices and circuits, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT (Internet of Things) devices - Wearable devices - Embedded systems
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to S-1142A27I-E6T1U are: - S-1132Bxx-I6T1U series - S-1172Bxx-U5T1G series - S-1206Bxx-I6T1U series - S-1317Bxx-U5T1G series
These alternative models offer similar functionality and characteristics, providing flexibility in choosing the most suitable voltage regulator for specific applications.
Word count: 409 words
技術ソリューションにおける S-1142A27I-E6T1U の適用に関連する 10 件の一般的な質問と回答をリストします。
Sure! Here are 10 common questions and answers related to the application of S-1142A27I-E6T1U in technical solutions:
Q1: What is S-1142A27I-E6T1U? A1: S-1142A27I-E6T1U is a specific model of voltage detector IC (integrated circuit) used for monitoring and detecting voltage levels in various technical applications.
Q2: What is the operating voltage range of S-1142A27I-E6T1U? A2: The operating voltage range of S-1142A27I-E6T1U is typically between 0.8V and 6.0V.
Q3: How does S-1142A27I-E6T1U detect voltage levels? A3: S-1142A27I-E6T1U utilizes a built-in voltage reference and comparator to monitor the input voltage and provide a digital output signal when the voltage exceeds or falls below a certain threshold.
Q4: Can S-1142A27I-E6T1U be used in battery-powered devices? A4: Yes, S-1142A27I-E6T1U can be used in battery-powered devices as it operates within a low voltage range and has low power consumption.
Q5: What is the typical response time of S-1142A27I-E6T1U? A5: The typical response time of S-1142A27I-E6T1U is around 200 microseconds, making it suitable for fast detection and response requirements.
Q6: Is S-1142A27I-E6T1U suitable for overvoltage protection? A6: Yes, S-1142A27I-E6T1U can be used for overvoltage protection by setting the threshold voltage to the desired level and triggering an action when the voltage exceeds it.
Q7: Can S-1142A27I-E6T1U be used in automotive applications? A7: Yes, S-1142A27I-E6T1U is suitable for automotive applications as it meets the necessary standards and has a wide operating temperature range.
Q8: Does S-1142A27I-E6T1U have any built-in hysteresis? A8: Yes, S-1142A27I-E6T1U incorporates built-in hysteresis to prevent oscillation and provide stable output even in noisy environments.
Q9: What is the package type of S-1142A27I-E6T1U? A9: S-1142A27I-E6T1U comes in a small surface-mount package known as SOT-23-5.
Q10: Are there any application notes or reference designs available for S-1142A27I-E6T1U? A10: Yes, the manufacturer provides application notes and reference designs that can help users understand and implement S-1142A27I-E6T1U in their technical solutions effectively.
Please note that the answers provided here are general and may vary depending on the specific requirements and use cases.