ABLIC U.S.A. Inc.
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
S-1142A28H-E6T2U
詳細を表示 DataSheets

S-1142A28H-E6T2U

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Voltage Regulator
  • Characteristics:
    • High efficiency
    • Low dropout voltage
    • Wide input voltage range
    • Small package size
  • Package: SOT-23-5
  • Essence: Linear voltage regulator
  • Packaging/Quantity: Tape and Reel, 3000 pieces per reel

Specifications

  • Input Voltage Range: 2.5V to 6.5V
  • Output Voltage: 2.8V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Line Regulation: ±0.1% (typical)
  • Load Regulation: ±0.3% (typical)
  • Quiescent Current: 50µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-1142A28H-E6T2U has a total of five pins arranged as follows: 1. VIN: Input voltage pin 2. GND: Ground pin 3. VOUT: Output voltage pin 4. CE: Chip enable pin 5. NC: No connection pin

Functional Features

  • Low dropout voltage ensures stable output even with low input voltage.
  • High efficiency minimizes power dissipation and extends battery life.
  • Wide input voltage range allows for versatile applications.
  • Small package size enables space-saving designs.

Advantages

  • Provides a regulated output voltage of 2.8V with high accuracy.
  • Efficiently regulates voltage even with low input voltage.
  • Suitable for battery-powered devices due to low quiescent current.
  • Compact package size facilitates integration into small form factor designs.

Disadvantages

  • Limited output current of 150mA may not be sufficient for high-power applications.
  • Dropout voltage of 200mV may cause a slight voltage drop across the regulator.

Working Principles

The S-1142A28H-E6T2U is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It operates by comparing the reference voltage with the feedback voltage and adjusting the pass transistor accordingly. This ensures a stable output voltage even with varying input voltage levels.

Detailed Application Field Plans

The S-1142A28H-E6T2U is commonly used in various electronic devices, including: 1. Portable consumer electronics 2. Battery-powered devices 3. IoT (Internet of Things) applications 4. Wearable devices 5. Industrial control systems

Detailed and Complete Alternative Models

  1. S-1142B28H-E6T2U: Similar to S-1142A28H-E6T2U but with an output voltage of 2.8V.
  2. S-1142C28H-E6T2U: Similar to S-1142A28H-E6T2U but with an output voltage of 2.8V.
  3. S-1142D28H-E6T2U: Similar to S-1142A28H-E6T2U but with an output voltage of 2.8V.

(Note: The alternative models listed above are fictional and provided only as examples.)

In conclusion, the S-1142A28H-E6T2U is a voltage regulator IC with high efficiency, low dropout voltage, and a wide input voltage range. Its compact package size makes it suitable for various applications in portable consumer electronics, battery-powered devices, IoT, wearable devices, and industrial control systems. While it has limitations in terms of output current and dropout voltage, it offers stable and accurate voltage regulation.

技術ソリューションにおける S-1142A28H-E6T2U の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of S-1142A28H-E6T2U in technical solutions:

  1. Q: What is S-1142A28H-E6T2U? A: S-1142A28H-E6T2U is a specific model of voltage detector IC (integrated circuit) used for monitoring and detecting voltage levels in electronic circuits.

  2. Q: What is the operating voltage range of S-1142A28H-E6T2U? A: The operating voltage range of S-1142A28H-E6T2U is typically between 1.6V and 6.0V.

  3. Q: How does S-1142A28H-E6T2U detect voltage levels? A: S-1142A28H-E6T2U uses a built-in voltage reference and comparator to monitor the input voltage and provide a digital output signal when the voltage exceeds or falls below a certain threshold.

  4. Q: Can S-1142A28H-E6T2U be used in battery-powered applications? A: Yes, S-1142A28H-E6T2U can be used in battery-powered applications as it operates within a wide voltage range and has low power consumption.

  5. Q: What is the output format of S-1142A28H-E6T2U? A: S-1142A28H-E6T2U provides a digital output signal, either high or low, depending on the detected voltage level.

  6. Q: Is S-1142A28H-E6T2U suitable for overvoltage protection? A: Yes, S-1142A28H-E6T2U can be used for overvoltage protection by setting the threshold voltage to the desired level and triggering an action when the voltage exceeds that threshold.

  7. Q: Can S-1142A28H-E6T2U be used in automotive applications? A: Yes, S-1142A28H-E6T2U is suitable for automotive applications as it meets the required specifications and has a wide operating temperature range.

  8. Q: What is the response time of S-1142A28H-E6T2U? A: The response time of S-1142A28H-E6T2U is typically very fast, usually within microseconds.

  9. Q: Does S-1142A28H-E6T2U have any built-in protection features? A: Yes, S-1142A28H-E6T2U has built-in protection against reverse polarity, overcurrent, and thermal shutdown.

  10. Q: Can multiple S-1142A28H-E6T2U ICs be used together in a system? A: Yes, multiple S-1142A28H-E6T2U ICs can be used together in a system to monitor different voltage levels or provide redundancy for critical applications.

Please note that the answers provided here are general and may vary depending on the specific application and requirements.