ABLIC U.S.A. Inc.
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
S-1142A2JH-E6T2U
詳細を表示 DataSheets

S-1142A2JH-E6T2U

Product Overview

Category: Integrated Circuit (IC)

Use: Voltage Regulator

Characteristics: - Low dropout voltage - High output voltage accuracy - Low quiescent current - Overcurrent protection - Thermal shutdown protection

Package: SOT-23-5

Essence: The S-1142A2JH-E6T2U is a voltage regulator IC designed to provide a stable output voltage for various electronic devices.

Packaging/Quantity: The S-1142A2JH-E6T2U is typically sold in reels containing 3000 units.

Specifications

  • Input Voltage Range: 2.5V - 6.5V
  • Output Voltage Range: 1.2V - 5.5V
  • Dropout Voltage: 200mV @ 100mA
  • Quiescent Current: 30µA
  • Output Current: 100mA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-1142A2JH-E6T2U has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)
  4. NC (No Connection)
  5. EN (Enable)

Functional Features

  • Low Dropout Voltage: The S-1142A2JH-E6T2U exhibits a low dropout voltage, ensuring efficient power conversion even when the input voltage is close to the desired output voltage.
  • High Output Voltage Accuracy: This voltage regulator provides precise output voltage regulation, minimizing voltage fluctuations and ensuring stable operation of connected devices.
  • Low Quiescent Current: With a low quiescent current, the S-1142A2JH-E6T2U minimizes power consumption when the load is light or idle.
  • Overcurrent Protection: The IC incorporates overcurrent protection, safeguarding connected devices from excessive current flow and potential damage.
  • Thermal Shutdown Protection: In case of excessive heat, the S-1142A2JH-E6T2U features thermal shutdown protection, preventing overheating and ensuring safe operation.

Advantages and Disadvantages

Advantages: - High output voltage accuracy - Low dropout voltage - Overcurrent and thermal protection - Low quiescent current

Disadvantages: - Limited output current (100mA)

Working Principles

The S-1142A2JH-E6T2U operates as a linear voltage regulator. It regulates the output voltage by adjusting the resistance between the input and output terminals, maintaining a stable voltage regardless of changes in the input voltage or load conditions. The internal circuitry of the IC ensures accurate regulation and protection against overcurrent and thermal issues.

Detailed Application Field Plans

The S-1142A2JH-E6T2U finds applications in various electronic devices that require stable and regulated power supply, such as: - Mobile phones - Portable media players - Digital cameras - Wireless communication devices - Battery-powered devices

Detailed and Complete Alternative Models

  1. S-1132Bxx-I6T1G: Similar voltage regulator IC with higher output current capability (up to 500mA).
  2. S-1112Bxx-N4T1G: Voltage regulator IC with adjustable output voltage and low quiescent current.
  3. S-1172Bxx-U5T1G: Ultra-low dropout voltage regulator IC suitable for applications with tight voltage requirements.

These alternative models offer different specifications and features to cater to specific application needs.

Word count: 346 words

技術ソリューションにおける S-1142A2JH-E6T2U の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of S-1142A2JH-E6T2U in technical solutions:

  1. Q: What is the purpose of S-1142A2JH-E6T2U in technical solutions? A: S-1142A2JH-E6T2U is a voltage detector IC that helps monitor and control voltage levels in various electronic systems.

  2. Q: What is the operating voltage range of S-1142A2JH-E6T2U? A: The operating voltage range of S-1142A2JH-E6T2U is typically between 0.8V and 6.0V.

  3. Q: How does S-1142A2JH-E6T2U detect voltage levels? A: S-1142A2JH-E6T2U uses a built-in voltage reference and comparator to detect voltage levels above or below a set threshold.

  4. Q: Can S-1142A2JH-E6T2U be used in battery-powered applications? A: Yes, S-1142A2JH-E6T2U can be used in battery-powered applications as it has low power consumption and operates within a wide voltage range.

  5. Q: What is the output configuration of S-1142A2JH-E6T2U? A: S-1142A2JH-E6T2U provides an open-drain output, which allows for easy integration with other components in the system.

  6. Q: Is S-1142A2JH-E6T2U suitable for overvoltage protection? A: No, S-1142A2JH-E6T2U is primarily designed for voltage detection and monitoring, not for overvoltage protection.

  7. Q: Can S-1142A2JH-E6T2U be used in automotive applications? A: Yes, S-1142A2JH-E6T2U is suitable for automotive applications as it meets the necessary quality and reliability standards.

  8. Q: What is the typical response time of S-1142A2JH-E6T2U? A: The typical response time of S-1142A2JH-E6T2U is around 100 microseconds.

  9. Q: Does S-1142A2JH-E6T2U have any built-in hysteresis? A: Yes, S-1142A2JH-E6T2U has a built-in hysteresis feature to prevent oscillation near the threshold voltage.

  10. Q: Can multiple S-1142A2JH-E6T2U devices be connected together in a system? A: Yes, multiple S-1142A2JH-E6T2U devices can be connected together to monitor different voltage levels or provide redundancy in critical systems.

Please note that these answers are general and may vary depending on the specific application and requirements.