S-1142C28H-E6T2U

Product Overview

Use

This product is used for regulating voltage in electronic circuits.

Characteristics

Package: The S-1142C28H-E6T2U comes in a compact surface-mount package.
Essence: It is a low-dropout voltage regulator with high accuracy and low power consumption.
Packaging/Quantity: The product is typically packaged in reels, with a quantity of 3000 units per reel.

Specifications

The specifications of the S-1142C28H-E6T2U are as follows:

Input Voltage Range: 2.5V to 6.5V
Output Voltage: 2.8V
Output Current: 100mA (max)
Dropout Voltage: 200mV (typ)
Quiescent Current: 30µA (typ)
Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-1142C28H-E6T2U has the following pin configuration:

VIN: Input voltage pin
GND: Ground pin
VOUT: Output voltage pin
CE: Chip enable pin

Functional Features

Low dropout voltage: The S-1142C28H-E6T2U exhibits a low dropout voltage, ensuring efficient regulation even when the input voltage is close to the desired output voltage.
High accuracy: This voltage regulator provides high accuracy in maintaining the output voltage within specified limits.
Low power consumption: With a quiescent current of only 30µA, the S-1142C28H-E6T2U minimizes power consumption, making it suitable for battery-powered applications.

Advantages and Disadvantages

Advantages

Compact package size
Low dropout voltage
High accuracy
Low power consumption

Disadvantages

Limited output current capacity (100mA max)

Working Principles

The S-1142C28H-E6T2U operates based on the principle of a low-dropout voltage regulator. It uses a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. This allows it to maintain a stable output voltage even when the input voltage fluctuates.

Detailed Application Field Plans

The S-1142C28H-E6T2U is commonly used in various electronic devices and circuits, including but not limited to:

Mobile phones
Portable media players
Digital cameras
Wireless communication devices
Battery-powered systems

Detailed and Complete Alternative Models

Here are some alternative models that can be considered as alternatives to the S-1142C28H-E6T2U:

S-1132Bxx-I6T1U: A similar voltage regulator with adjustable output voltage.
S-1172Bxx-U5T1G: A higher current capacity voltage regulator with fixed output voltage.
S-1112Bxx-N4T1U: A low-power voltage regulator with ultra-low dropout voltage.

Please note that these alternative models may have different specifications and pin configurations, so careful consideration should be given to the specific requirements of the application.

Word count: 405 words

技術ソリューションにおける S-1142C28H-E6T2U の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of S-1142C28H-E6T2U in technical solutions:

Q: What is S-1142C28H-E6T2U? A: S-1142C28H-E6T2U is a voltage detector IC (integrated circuit) that monitors the voltage level and provides an output signal when the voltage exceeds or falls below a certain threshold.
Q: What is the operating voltage range of S-1142C28H-E6T2U? A: The operating voltage range of S-1142C28H-E6T2U is typically between 1.6V and 6.0V.
Q: How does S-1142C28H-E6T2U detect voltage levels? A: S-1142C28H-E6T2U uses a built-in voltage reference and comparator to compare the input voltage with a preset threshold. When the voltage crosses the threshold, it triggers the output signal.
Q: Can S-1142C28H-E6T2U be used for overvoltage protection? A: Yes, S-1142C28H-E6T2U can be used for overvoltage protection by setting the threshold voltage slightly above the maximum allowable voltage level.
Q: Is S-1142C28H-E6T2U suitable for battery-powered applications? A: Yes, S-1142C28H-E6T2U is suitable for battery-powered applications as it has a low quiescent current consumption, which helps conserve battery life.
Q: Can S-1142C28H-E6T2U be used for undervoltage detection? A: Yes, S-1142C28H-E6T2U can be used for undervoltage detection by setting the threshold voltage slightly below the minimum allowable voltage level.
Q: What is the output type of S-1142C28H-E6T2U? A: S-1142C28H-E6T2U provides an open-drain output, which requires an external pull-up resistor to obtain a logic-level signal.
Q: What is the response time of S-1142C28H-E6T2U? A: The response time of S-1142C28H-E6T2U is typically around a few microseconds, making it suitable for fast voltage monitoring applications.
Q: Can S-1142C28H-E6T2U be used in automotive applications? A: Yes, S-1142C28H-E6T2U is designed to meet automotive standards and can be used in various automotive applications such as battery management systems.
Q: Are there any additional features or protections provided by S-1142C28H-E6T2U? A: Yes, S-1142C28H-E6T2U includes features like hysteresis, which helps prevent chattering of the output signal near the threshold voltage, ensuring stable operation.