S-1142CC5H-E6T2U
Product Overview
Category
S-1142CC5H-E6T2U belongs to the category of voltage regulators.
Use
This product is used for regulating voltage in electronic circuits.
Characteristics
- Compact size
- High efficiency
- Low power consumption
- Wide input voltage range
- Overcurrent protection
- Thermal shutdown protection
Package
The S-1142CC5H-E6T2U comes in a small surface-mount package.
Essence
The essence of this product lies in its ability to provide stable and regulated voltage output for various electronic devices.
Packaging/Quantity
The S-1142CC5H-E6T2U is typically packaged in reels and is available in quantities of 3000 units per reel.
Specifications
- Input Voltage Range: 2.5V - 6.5V
- Output Voltage: 3.3V
- Output Current: 150mA
- Dropout Voltage: 200mV (max)
- Quiescent Current: 30µA (typ)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
- CE: Chip enable pin
Functional Features
- Voltage regulation: The S-1142CC5H-E6T2U ensures a stable output voltage regardless of input voltage fluctuations.
- Overcurrent protection: It incorporates overcurrent protection to safeguard connected devices from excessive current flow.
- Thermal shutdown protection: In case of excessive temperature, the regulator shuts down to prevent damage.
Advantages and Disadvantages
Advantages
- Small form factor allows for easy integration into compact electronic devices.
- High efficiency results in minimal power loss.
- Wide input voltage range makes it suitable for various applications.
- Overcurrent and thermal shutdown protection enhance device safety.
Disadvantages
- Limited output current may not be sufficient for high-power applications.
- Dropout voltage of 200mV may affect performance in low-voltage scenarios.
Working Principles
The S-1142CC5H-E6T2U operates based on a feedback mechanism. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage, compensating for any fluctuations in the input voltage.
Detailed Application Field Plans
The S-1142CC5H-E6T2U finds application in various electronic devices, including: 1. Mobile phones 2. Portable media players 3. Wearable devices 4. IoT devices 5. Battery-powered devices
Detailed and Complete Alternative Models
- S-1132Bxx-I6T1G: Similar voltage regulator with higher output current capability.
- S-1172Bxx-U5T1G: Voltage regulator with adjustable output voltage.
- S-1112Bxx-N4T1G: Low dropout voltage regulator suitable for low-voltage applications.
These alternative models offer different specifications and features to cater to specific requirements.
Word count: 400 words
技術ソリューションにおける S-1142CC5H-E6T2U の適用に関連する 10 件の一般的な質問と回答をリストします。
Sure! Here are 10 common questions and answers related to the application of S-1142CC5H-E6T2U in technical solutions:
Q: What is the S-1142CC5H-E6T2U? A: The S-1142CC5H-E6T2U is a voltage detector IC (integrated circuit) that monitors the voltage level in electronic circuits.
Q: What is the operating voltage range of S-1142CC5H-E6T2U? A: The operating voltage range of S-1142CC5H-E6T2U is typically between 0.8V and 6.0V.
Q: How does S-1142CC5H-E6T2U work? A: S-1142CC5H-E6T2U works by comparing the input voltage with a reference voltage. If the input voltage falls below or exceeds the reference voltage, it triggers an output signal.
Q: What is the purpose of using S-1142CC5H-E6T2U in technical solutions? A: S-1142CC5H-E6T2U is commonly used as a voltage monitoring and protection device in various applications, such as battery-powered devices, power management systems, and automotive electronics.
Q: Can S-1142CC5H-E6T2U be used for overvoltage protection? A: Yes, S-1142CC5H-E6T2U can be used for overvoltage protection. It can detect when the input voltage exceeds a certain threshold and trigger an alarm or shutdown mechanism.
Q: Is S-1142CC5H-E6T2U suitable for low-power applications? A: Yes, S-1142CC5H-E6T2U is suitable for low-power applications as it has a low quiescent current consumption, typically around 1.0µA.
Q: Can S-1142CC5H-E6T2U be used in automotive electronics? A: Yes, S-1142CC5H-E6T2U is commonly used in automotive electronics due to its ability to monitor and protect voltage levels in various automotive systems.
Q: Does S-1142CC5H-E6T2U have built-in hysteresis? A: Yes, S-1142CC5H-E6T2U has built-in hysteresis, which helps prevent false triggering by introducing a small voltage difference between the detection and release points.
Q: What is the output configuration of S-1142CC5H-E6T2U? A: S-1142CC5H-E6T2U has an open-drain output configuration, allowing it to interface with other devices or microcontrollers.
Q: Is S-1142CC5H-E6T2U available in different package options? A: Yes, S-1142CC5H-E6T2U is available in different package options, such as SOT-23-5 and USP-6C, providing flexibility for different design requirements.
Please note that the answers provided here are general and may vary depending on the specific datasheet and application guidelines for S-1142CC5H-E6T2U.