S-1165B30MC-N6PTFG

Product Overview

Use

This product is primarily used for regulating voltage in electronic circuits.

Characteristics

Input Voltage Range: 2.7V to 5.5V
Output Voltage Range: 0.8V to 3.6V
Maximum Output Current: 300mA
Dropout Voltage: 200mV (at 100mA)
Package Type: SOT-23-5
Essence: Low dropout linear voltage regulator

Packaging/Quantity

The S-1165B30MC-N6PTFG is typically packaged in reels and comes in quantities of 3000 units per reel.

Specifications

Input Voltage Range: 2.7V to 5.5V
Output Voltage Range: 0.8V to 3.6V
Output Current: 300mA (maximum)
Dropout Voltage: 200mV (at 100mA)
Line Regulation: ±0.1% (typical)
Load Regulation: ±0.2% (typical)
Quiescent Current: 75μA (typical)
Operating Temperature Range: -40°C to +85°C
Package Type: SOT-23-5

Detailed Pin Configuration

The S-1165B30MC-N6PTFG has a total of five pins:

VIN: Input voltage pin.
GND: Ground pin.
EN: Enable pin.
VOUT: Output voltage pin.
NC: No connection pin.

Functional Features

Low dropout voltage: The S-1165B30MC-N6PTFG exhibits a low dropout voltage, ensuring efficient voltage regulation even when the input voltage is close to the desired output voltage.
Low quiescent current: The regulator has a low quiescent current, minimizing power consumption in standby or idle modes.
Short-circuit protection: The device incorporates short-circuit protection, safeguarding against potential damage caused by excessive current flow.

Advantages and Disadvantages

Advantages

Wide input voltage range allows for compatibility with various power sources.
Low dropout voltage ensures efficient voltage regulation.
Compact SOT-23-5 package enables space-saving integration into electronic circuits.
Short-circuit protection enhances device reliability.

Disadvantages

Maximum output current of 300mA may limit its use in high-power applications.
Limited output voltage range may not be suitable for certain specialized applications.

Working Principles

The S-1165B30MC-N6PTFG operates based on the principle of linear voltage regulation. It utilizes a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. This results in a stable output voltage regardless of variations in the input voltage.

Detailed Application Field Plans

The S-1165B30MC-N6PTFG finds application in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT (Internet of Things) devices - Embedded systems - Wearable devices

Detailed and Complete Alternative Models

S-1165B30MC-N6PTEG
S-1165B30MC-N6PTFH
S-1165B30MC-N6PTFJ
S-1165B30MC-N6PTFK
S-1165B30MC-N6PTFL

These alternative models offer similar functionality and characteristics to the S-1165B30MC-N6PTFG, providing flexibility in design and compatibility with different system requirements.

In conclusion, the S-1165B30MC-N6PTFG is a voltage regulator that offers efficient voltage regulation, low dropout voltage, and short-circuit protection. It finds application in various electronic devices and systems, making it a versatile choice for designers.

技術ソリューションにおける S-1165B30MC-N6PTFG の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of S-1165B30MC-N6PTFG in technical solutions:

Question: What is S-1165B30MC-N6PTFG?
Answer: S-1165B30MC-N6PTFG is a specific model or part number of a component used in technical solutions.
Question: What is the purpose of S-1165B30MC-N6PTFG?
Answer: The purpose of S-1165B30MC-N6PTFG is to perform a specific function within a technical solution, such as voltage regulation or power management.
Question: What are the key features of S-1165B30MC-N6PTFG?
Answer: Some key features of S-1165B30MC-N6PTFG may include low power consumption, high efficiency, overcurrent protection, and thermal shutdown.
Question: In which applications can S-1165B30MC-N6PTFG be used?
Answer: S-1165B30MC-N6PTFG can be used in various applications, including consumer electronics, industrial automation, automotive systems, and telecommunications.
Question: What is the input voltage range for S-1165B30MC-N6PTFG?
Answer: The input voltage range for S-1165B30MC-N6PTFG may vary, but it is typically designed to operate within a specific range, such as 2.7V to 5.5V.
Question: What is the output voltage range of S-1165B30MC-N6PTFG?
Answer: The output voltage range of S-1165B30MC-N6PTFG depends on the specific configuration or variant, but it is commonly designed to provide a stable output voltage, such as 3.3V.
Question: Can S-1165B30MC-N6PTFG handle high current loads?
Answer: Yes, S-1165B30MC-N6PTFG is typically designed to handle moderate to high current loads, depending on the specific variant and thermal considerations.
Question: Is S-1165B30MC-N6PTFG compatible with other components or microcontrollers?
Answer: Yes, S-1165B30MC-N6PTFG is designed to be compatible with various components and microcontrollers commonly used in technical solutions.
Question: Does S-1165B30MC-N6PTFG have any built-in protection features?
Answer: Yes, S-1165B30MC-N6PTFG often includes built-in protection features such as overcurrent protection, thermal shutdown, and short-circuit protection.
Question: Where can I find more detailed information about S-1165B30MC-N6PTFG?
Answer: You can refer to the datasheet or technical documentation provided by the manufacturer of S-1165B30MC-N6PTFG for more detailed information regarding its specifications, application notes, and recommended usage guidelines.