ABLIC U.S.A. Inc.
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
S-1167B50-I6T2G
詳細を表示 DataSheets

S-1167B50-I6T2G

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Consumption
  • Package: SOT-23-5
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 3000 pieces per reel

Specifications

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage: 5.0V ±2%
  • Maximum Output Current: 100mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. GND (Ground)
  2. VIN (Input Voltage)
  3. VOUT (Output Voltage)
  4. NC (No Connection)
  5. EN (Enable)

Functional Features

  • Low dropout voltage ensures efficient power conversion.
  • Wide input voltage range allows for versatile applications.
  • Low quiescent current minimizes power consumption.
  • Enable pin provides control over the regulator's operation.

Advantages

  • High efficiency results in reduced power dissipation.
  • Small package size enables space-saving designs.
  • Wide operating temperature range enhances reliability.
  • Low dropout voltage allows for use with low input voltages.

Disadvantages

  • Limited maximum output current may restrict certain applications.
  • No connection on pin 4 limits flexibility in circuit design.

Working Principles

The S-1167B50-I6T2G is a voltage regulator IC that converts an input voltage within the range of 2.5V to 6.0V into a stable 5.0V output voltage. It operates by utilizing a feedback mechanism to adjust the internal circuitry and maintain the desired output voltage. The enable pin allows the user to control the regulator's operation, enabling or disabling it as needed.

Detailed Application Field Plans

The S-1167B50-I6T2G is commonly used in various electronic devices that require a stable 5.0V power supply. Some typical application fields include: 1. Battery-powered portable devices 2. IoT (Internet of Things) devices 3. Wearable technology 4. Consumer electronics 5. Automotive applications

Detailed and Complete Alternative Models

  1. S-1167B33-I6T2G: Voltage regulator with a 3.3V output voltage.
  2. S-1167B25-I6T2G: Voltage regulator with a 2.5V output voltage.
  3. S-1167B12-I6T2G: Voltage regulator with a 1.2V output voltage.
  4. S-1167B15-I6T2G: Voltage regulator with a 1.5V output voltage.
  5. S-1167B18-I6T2G: Voltage regulator with a 1.8V output voltage.

(Note: These alternative models are based on the same series and package type.)

This concludes the encyclopedia entry for the S-1167B50-I6T2G voltage regulator IC.

技術ソリューションにおける S-1167B50-I6T2G の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of S-1167B50-I6T2G in technical solutions:

  1. Question: What is the purpose of S-1167B50-I6T2G in technical solutions?
    Answer: S-1167B50-I6T2G is a specific component used for power management in various technical solutions.

  2. Question: What is the input voltage range supported by S-1167B50-I6T2G?
    Answer: The input voltage range supported by S-1167B50-I6T2G is typically between 2.5V and 6.5V.

  3. Question: Can S-1167B50-I6T2G handle high current loads?
    Answer: Yes, S-1167B50-I6T2G is designed to handle high current loads up to a certain limit, usually around 1A.

  4. Question: Is S-1167B50-I6T2G suitable for battery-powered applications?
    Answer: Yes, S-1167B50-I6T2G is commonly used in battery-powered applications due to its low quiescent current and efficient power conversion.

  5. Question: Does S-1167B50-I6T2G have built-in protection features?
    Answer: Yes, S-1167B50-I6T2G typically includes overcurrent protection, thermal shutdown, and short-circuit protection to ensure safe operation.

  6. Question: Can S-1167B50-I6T2G be used in both step-up and step-down voltage conversion?
    Answer: No, S-1167B50-I6T2G is specifically designed for step-down (buck) voltage conversion applications.

  7. Question: What is the typical efficiency of S-1167B50-I6T2G?
    Answer: The typical efficiency of S-1167B50-I6T2G is around 90%, making it an energy-efficient choice for power management.

  8. Question: Does S-1167B50-I6T2G require external components for operation?
    Answer: Yes, S-1167B50-I6T2G usually requires a few external components such as input/output capacitors and inductors to function properly.

  9. Question: Can S-1167B50-I6T2G operate in a wide temperature range?
    Answer: Yes, S-1167B50-I6T2G is designed to operate reliably in a wide temperature range, typically from -40°C to 85°C.

  10. Question: Is S-1167B50-I6T2G a surface-mount device (SMD)?
    Answer: Yes, S-1167B50-I6T2G is commonly available as a surface-mount device, making it suitable for compact and automated assembly processes.

Please note that the specific details and features of S-1167B50-I6T2G may vary depending on the manufacturer and datasheet specifications.