S-1206B24-M3T1G

Basic Information Overview

• Category: Electronic Component
• Use: Voltage Regulator
• Characteristics: High Efficiency, Low Dropout Voltage
• Package: SOT-23-5
• Essence: Step-Down Linear Regulator
• Packaging/Quantity: Tape and Reel, 3000 pieces per reel

Specifications

• Input Voltage Range: 2.5V to 5.5V
• Output Voltage: 2.4V
• Maximum Output Current: 150mA
• Dropout Voltage: 200mV at 100mA
• Line Regulation: ±0.2%
• Load Regulation: ±0.5%
• Quiescent Current: 50µA (typical)
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-1206B24-M3T1G has a total of five pins arranged in the following configuration:

```

---

| | --| |-- |____| ```

Pin 1: VIN (Input Voltage) Pin 2: GND (Ground) Pin 3: EN (Enable) Pin 4: NC (No Connection) Pin 5: VOUT (Output Voltage)

Functional Features

• Step-down linear regulator with high efficiency
• Low dropout voltage ensures stable output even with low input voltage
• Enable pin allows for easy on/off control
• Small package size (SOT-23-5) makes it suitable for space-constrained applications
• Excellent line and load regulation for precise voltage control
• Low quiescent current minimizes power consumption in standby mode

Advantages and Disadvantages

Advantages: - High efficiency results in reduced power dissipation - Low dropout voltage enables operation with low input voltages - Small package size allows for compact designs - Excellent line and load regulation ensures stable output voltage

Disadvantages: - Limited maximum output current (150mA) - No connection on pin 4 may limit flexibility in certain applications

Working Principles

The S-1206B24-M3T1G is a step-down linear regulator that converts a higher input voltage to a lower output voltage. It achieves this by using a series pass transistor to regulate the voltage across a resistor network. The enable pin allows the user to control the regulator's operation, enabling or disabling the output as needed. The low dropout voltage ensures that the output remains stable even when the input voltage is close to the desired output voltage.

Detailed Application Field Plans

The S-1206B24-M3T1G is commonly used in various electronic devices and systems where a stable and regulated voltage supply is required. Some potential application fields include: - Battery-powered devices - Portable consumer electronics - IoT devices - Wearable devices - Embedded systems - Industrial automation

Detailed and Complete Alternative Models

• S-1206B18-M3T1G: Output voltage of 1.8V
• S-1206B33-M3T1G: Output voltage of 3.3V
• S-1206B50-M3T1G: Output voltage of 5.0V
• S-1206B12-M3T1G: Output voltage of 1.2V

These alternative models offer different output voltages to cater to specific application requirements.

Word count: 398 words