S-1312C10-M5T1U3

Product Overview

Category

S-1312C10-M5T1U3 belongs to the category of voltage regulators.

Use

This product is commonly used for regulating voltage in electronic circuits.

Characteristics

• Compact size
• High efficiency
• Low dropout voltage
• Wide input voltage range
• Overcurrent protection
• Thermal shutdown protection

Package

The S-1312C10-M5T1U3 comes in a small surface-mount package.

Essence

The essence of this product lies in its ability to provide stable and regulated voltage to electronic devices.

Packaging/Quantity

The S-1312C10-M5T1U3 is typically packaged in reels and is available in quantities of 3000 units per reel.

Specifications

• Input Voltage Range: 2.0V to 6.0V
• Output Voltage: 1.0V
• Maximum Output Current: 100mA
• Dropout Voltage: 160mV (at 50mA)
• Quiescent Current: 30μA (typical)
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-1312C10-M5T1U3 has the following pin configuration:

```

---

| | --| VIN VOUT |-- --| GND EN |-- |___________| ```

• VIN: Input voltage pin
• VOUT: Output voltage pin
• GND: Ground pin
• EN: Enable pin (active high)

Functional Features

• Voltage regulation: The S-1312C10-M5T1U3 ensures a stable output voltage regardless of input voltage fluctuations.
• Overcurrent protection: The device automatically shuts down when the output current exceeds the maximum specified value.
• Thermal shutdown protection: In case of excessive temperature, the regulator shuts down to prevent damage.

Advantages and Disadvantages

Advantages

• Compact size allows for easy integration into small electronic devices.
• High efficiency results in minimal power loss during voltage regulation.
• Wide input voltage range provides flexibility in various applications.
• Overcurrent and thermal shutdown protections enhance device safety.

Disadvantages

• Limited output current capacity may not be suitable for high-power applications.
• Dropout voltage may affect performance in low-input voltage scenarios.

Working Principles

The S-1312C10-M5T1U3 operates based on a feedback control mechanism. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage. The enable pin allows for turning the regulator on or off as needed.

Detailed Application Field Plans

The S-1312C10-M5T1U3 finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

• S-1312C10-A5T1U3
• S-1312C10-B5T1U3
• S-1312C10-C5T1U3
• S-1312C10-D5T1U3

These alternative models offer similar functionality and characteristics, providing options for different design requirements.

In conclusion, the S-1312C10-M5T1U3 is a compact and efficient voltage regulator that offers stable voltage output, overcurrent protection, and thermal shutdown protection. Its wide input voltage range makes it suitable for various applications in the electronics industry. While it has limitations in terms of output current capacity and dropout voltage, there are alternative models available to cater to different design needs.