ABLIC U.S.A. Inc.
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
S-1312D28-A4T2U3
詳細を表示 DataSheets

S-1312D28-A4T2U3

Basic Information Overview

Category: Electronic Component
Use: Voltage Regulator
Characteristics: High Efficiency, Low Dropout, Low Quiescent Current
Package: SOT-23-5
Essence: Linear Voltage Regulator
Packaging/Quantity: Tape and Reel, 3000 pieces per reel

Specifications

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage Range: 1.2V to 5.5V
  • Maximum Output Current: 150mA
  • Dropout Voltage: 160mV (typical) at 100mA
  • Quiescent Current: 30µA (typical)
  • Line Regulation: ±0.05% (typical)
  • Load Regulation: ±0.2% (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-1312D28-A4T2U3 voltage regulator has a total of five pins:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. CE: Chip enable pin
  5. NC: No connection pin

Functional Features

  • High efficiency with low dropout voltage
  • Low quiescent current for power-saving applications
  • Excellent line and load regulation for stable output voltage
  • Built-in overcurrent protection
  • Thermal shutdown protection to prevent overheating
  • Fast transient response for sudden load changes

Advantages and Disadvantages

Advantages: - High efficiency ensures minimal power loss - Low dropout voltage allows for operation with low input voltages - Low quiescent current extends battery life in portable devices - Overcurrent and thermal shutdown protection enhance reliability - Fast transient response enables quick adaptation to load changes

Disadvantages: - Limited maximum output current of 150mA - Input voltage range restricted to 2.5V to 6.0V - SOT-23-5 package may require surface mount soldering expertise

Working Principles

The S-1312D28-A4T2U3 is a linear voltage regulator that maintains a stable output voltage regardless of input voltage fluctuations. It utilizes a pass transistor to regulate the voltage difference between the input and desired output voltage. The internal circuitry monitors the output voltage and adjusts the pass transistor accordingly to maintain the set voltage level.

Detailed Application Field Plans

The S-1312D28-A4T2U3 voltage regulator finds applications in various electronic devices, including but not limited to:

  1. Battery-powered portable devices such as smartphones, tablets, and wearable devices.
  2. IoT (Internet of Things) devices requiring low power consumption.
  3. Industrial control systems where stable voltage supply is crucial.
  4. Automotive electronics for regulating voltage in vehicle subsystems.
  5. Consumer electronics like digital cameras, MP3 players, and handheld gaming consoles.

Detailed and Complete Alternative Models

  1. S-1312D25-A4T2U3: Similar specifications with a lower dropout voltage of 100mV at 100mA.
  2. S-1312D33-A4T2U3: Similar specifications with a higher maximum output current of 300mA.
  3. S-1312D28-M5T2U3: Similar specifications in a smaller SOT-23-5 package with different pin configuration.

These alternative models provide flexibility in choosing the most suitable voltage regulator based on specific requirements.

Word Count: 346 words

技術ソリューションにおける S-1312D28-A4T2U3 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of S-1312D28-A4T2U3 in technical solutions:

  1. Q: What is S-1312D28-A4T2U3? A: S-1312D28-A4T2U3 is a specific model or part number of a component used in technical solutions, typically in electronic circuits.

  2. Q: What is the purpose of S-1312D28-A4T2U3? A: The purpose of S-1312D28-A4T2U3 is to perform a specific function within a technical solution, such as voltage regulation or power management.

  3. Q: How does S-1312D28-A4T2U3 work? A: S-1312D28-A4T2U3 works by receiving an input voltage and regulating it to provide a stable output voltage according to its specifications.

  4. Q: What are the key features of S-1312D28-A4T2U3? A: Some key features of S-1312D28-A4T2U3 may include low dropout voltage, high efficiency, overcurrent protection, thermal shutdown, and small form factor.

  5. Q: What are the typical applications of S-1312D28-A4T2U3? A: S-1312D28-A4T2U3 can be used in various technical solutions, including battery-powered devices, IoT applications, portable electronics, and embedded systems.

  6. Q: What is the input voltage range for S-1312D28-A4T2U3? A: The input voltage range for S-1312D28-A4T2U3 may vary, but it is typically specified in the datasheet, such as 2.5V to 6.0V.

  7. Q: What is the output voltage range of S-1312D28-A4T2U3? A: The output voltage range of S-1312D28-A4T2U3 is also specified in the datasheet, for example, it may be 2.8V with a tolerance of ±1%.

  8. Q: Can S-1312D28-A4T2U3 handle high current loads? A: Yes, S-1312D28-A4T2U3 is designed to handle certain current loads, but it is important to check its maximum current rating in the datasheet.

  9. Q: Is S-1312D28-A4T2U3 suitable for automotive applications? A: It depends on the specific requirements and certifications needed for automotive applications. Some variants of S-1312D28-A4T2U3 may be suitable, while others may not.

  10. Q: Where can I find more information about S-1312D28-A4T2U3? A: You can find more detailed information about S-1312D28-A4T2U3 in its datasheet, which is usually available on the manufacturer's website or through authorized distributors.

Please note that the answers provided here are general and may vary depending on the specific specifications and documentation of S-1312D28-A4T2U3.