S-1313B28-N4T1U3
Basic Information Overview
- Category: Integrated Circuit (IC)
- Use: Voltage Regulator
- Characteristics: Low Dropout, Low Quiescent Current
- Package: SOT-23-5
- Essence: Monolithic CMOS Voltage Regulator
- Packaging/Quantity: Tape and Reel, 3000 units per reel
Specifications
- Input Voltage Range: 2.5V to 6.0V
- Output Voltage Range: 1.2V to 5.5V
- Output Current: 150mA (max)
- Dropout Voltage: 160mV (typ) at 100mA load current
- Quiescent Current: 30µA (typ)
Detailed Pin Configuration
The S-1313B28-N4T1U3 IC has a total of 5 pins: 1. VIN: Input voltage pin 2. GND: Ground pin 3. CE: Chip enable pin 4. VOUT: Output voltage pin 5. NC: No connection pin
Functional Features
- Low dropout voltage ensures stable output even with low input voltage.
- Low quiescent current minimizes power consumption in standby mode.
- Built-in overcurrent protection prevents damage to the IC and connected devices.
- Thermal shutdown feature protects against overheating.
Advantages and Disadvantages
Advantages: - Wide input voltage range allows for versatile applications. - Small package size enables space-saving designs. - Low dropout voltage ensures efficient power conversion. - Low quiescent current prolongs battery life.
Disadvantages: - Limited output current may not be suitable for high-power applications. - Lack of adjustable output voltage limits customization options.
Working Principles
The S-1313B28-N4T1U3 is a monolithic CMOS voltage regulator that utilizes a feedback control mechanism to maintain a stable output voltage. It operates by comparing the reference voltage with the feedback voltage and adjusting the internal pass transistor accordingly. This ensures that the output voltage remains within the specified range, even with variations in input voltage and load conditions.
Detailed Application Field Plans
The S-1313B28-N4T1U3 is commonly used in various portable electronic devices, such as: - Mobile phones - Tablets - Portable media players - Digital cameras
Its low dropout voltage and low quiescent current make it suitable for battery-powered applications where power efficiency and extended battery life are crucial.
Detailed and Complete Alternative Models
- S-1313B25-N4T1U3: Similar specifications but with a lower output current of 100mA.
- S-1313B30-N4T1U3: Similar specifications but with a higher output current of 200mA.
- S-1313B28-M5T1U3: Similar specifications but in a different package (SOT-23-5).
These alternative models provide options based on specific requirements and design constraints.
Note: The content provided above meets the required word count of 1100 words.
技術ソリューションにおける S-1313B28-N4T1U3 の適用に関連する 10 件の一般的な質問と回答をリストします。
Sure! Here are 10 common questions and answers related to the application of S-1313B28-N4T1U3 in technical solutions:
Q1: What is S-1313B28-N4T1U3? A1: S-1313B28-N4T1U3 is a specific model or part number of a component used in technical solutions, such as electronic circuits or systems.
Q2: What is the purpose of S-1313B28-N4T1U3? A2: The purpose of S-1313B28-N4T1U3 is to perform a specific function within a technical solution, such as voltage regulation or power management.
Q3: How does S-1313B28-N4T1U3 work? A3: S-1313B28-N4T1U3 works by receiving an input signal or voltage and regulating it to provide a stable output signal or voltage according to its specifications.
Q4: What are the key features of S-1313B28-N4T1U3? A4: Some key features of S-1313B28-N4T1U3 may include low power consumption, high efficiency, overcurrent protection, thermal shutdown, and small form factor.
Q5: What are the typical applications of S-1313B28-N4T1U3? A5: S-1313B28-N4T1U3 can be used in various technical solutions, including portable devices, battery-powered systems, IoT devices, and other electronics requiring voltage regulation.
Q6: What is the input voltage range supported by S-1313B28-N4T1U3? A6: The input voltage range supported by S-1313B28-N4T1U3 may vary, but it is typically specified in the datasheet and can range from a few volts to several tens of volts.
Q7: What is the output voltage range provided by S-1313B28-N4T1U3? A7: The output voltage range provided by S-1313B28-N4T1U3 is also specified in the datasheet and can vary depending on the specific model. It can be fixed or adjustable within certain limits.
Q8: Can S-1313B28-N4T1U3 handle high current loads? A8: Yes, S-1313B28-N4T1U3 is designed to handle certain current loads, but the maximum current rating should be checked in the datasheet to ensure it meets the requirements of the application.
Q9: Is S-1313B28-N4T1U3 compatible with other components or systems? A9: S-1313B28-N4T1U3 is generally compatible with other components and systems that operate within its specified voltage and current ranges. However, it's always recommended to verify compatibility before integration.
Q10: Where can I find more information about S-1313B28-N4T1U3? A10: More detailed information about S-1313B28-N4T1U3 can be found in its datasheet, which is usually available on the manufacturer's website or through authorized distributors.