ABLIC U.S.A. Inc.
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
S-1313C1B-N4T1U3
詳細を表示 DataSheets

S-1313C1B-N4T1U3

Introduction

The S-1313C1B-N4T1U3 is a voltage regulator IC belonging to the category of electronic components used for regulating and stabilizing voltage levels in various electronic devices. This entry provides an overview of the basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models of the S-1313C1B-N4T1U3.

Basic Information Overview

  • Category: Voltage Regulator IC
  • Use: Regulating and stabilizing voltage levels in electronic devices
  • Characteristics: High precision, low dropout voltage, small package size
  • Package: SOT-23-5
  • Essence: Voltage regulation and stabilization
  • Packaging/Quantity: Typically available in reels of 3000 pieces

Specifications

  • Input Voltage Range: 2.0V to 6.0V
  • Output Voltage Range: 1.0V to 5.5V
  • Output Current: 150mA
  • Dropout Voltage: 160mV (at 100mA output current)
  • Quiescent Current: 30µA
  • Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

The S-1313C1B-N4T1U3 has the following pin configuration: 1. VIN (Input Voltage) 2. GND (Ground) 3. CE (Control Enable) 4. VOUT (Output Voltage) 5. NC (No Connection)

Functional Features

  • Low dropout voltage
  • Built-in overcurrent protection
  • Thermal shutdown function
  • Small and lightweight package

Advantages and Disadvantages

Advantages

  • High precision voltage regulation
  • Low dropout voltage
  • Overcurrent protection enhances device safety
  • Compact package size enables space-efficient designs

Disadvantages

  • Limited maximum output current
  • Restricted input voltage range

Working Principles

The S-1313C1B-N4T1U3 operates by comparing the reference voltage with the divided output voltage to control the output transistor, thereby regulating the output voltage. When the output current exceeds the preset limit, the overcurrent protection activates to safeguard the IC and the connected circuitry. Additionally, the thermal shutdown function protects the IC from overheating.

Detailed Application Field Plans

The S-1313C1B-N4T1U3 is suitable for a wide range of applications, including: - Battery-powered devices - Portable consumer electronics - IoT devices - Wearable technology - Industrial sensors

Detailed and Complete Alternative Models

Some alternative models to the S-1313C1B-N4T1U3 include: - S-1313C1B-M5T1U3 - S-1313C1B-A5T1U3 - S-1313C1B-N5T1U3 - S-1313C1B-R5T1U3

In conclusion, the S-1313C1B-N4T1U3 is a versatile voltage regulator IC with high precision and compact design, making it suitable for various electronic applications.

(Word count: 410)

技術ソリューションにおける S-1313C1B-N4T1U3 の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is S-1313C1B-N4T1U3?

    • S-1313C1B-N4T1U3 is a voltage detector IC (integrated circuit) used in technical solutions to monitor and detect voltage levels.

  2. What is the operating voltage range of S-1313C1B-N4T1U3?

    • The operating voltage range of S-1313C1B-N4T1U3 is typically between 0.7V and 6.0V.

  3. How does S-1313C1B-N4T1U3 detect voltage levels?

    • S-1313C1B-N4T1U3 detects voltage levels by comparing the input voltage with a reference voltage and providing an output signal based on the comparison result.

  4. What is the typical application of S-1313C1B-N4T1U3 in technical solutions?

    • S-1313C1B-N4T1U3 is commonly used in battery-powered devices, power management systems, and portable electronic devices to monitor and manage voltage levels.

  5. What are the key features of S-1313C1B-N4T1U3?

    • Some key features of S-1313C1B-N4T1U3 include low operating current, high accuracy, built-in hysteresis, and a small package size.

  6. Can S-1313C1B-N4T1U3 be used in automotive applications?

    • Yes, S-1313C1B-N4T1U3 can be used in automotive applications where voltage monitoring and detection are required.

  7. What is the output format of S-1313C1B-N4T1U3?

    • The output format of S-1313C1B-N4T1U3 is typically digital, providing a logic-level output based on the detected voltage level.

  8. Does S-1313C1B-N4T1U3 have built-in protection features?

    • Yes, S-1313C1B-N4T1U3 often includes built-in overvoltage and undervoltage protection features to safeguard connected circuits.

  9. What is the temperature range for S-1313C1B-N4T1U3's operation?

    • The temperature range for S-1313C1B-N4T1U3's operation is usually between -40°C and 85°C, making it suitable for various environmental conditions.

  10. Is S-1313C1B-N4T1U3 suitable for low-power applications?

    • Yes, S-1313C1B-N4T1U3 is designed for low-power applications, making it ideal for energy-efficient electronic devices and systems.