S-1315C1J-M5T1U3

Product Overview

Category

S-1315C1J-M5T1U3 belongs to the category of voltage regulators.

Use

This product is used to regulate and stabilize voltage levels in electronic circuits.

Characteristics

• Compact size
• High efficiency
• Low power consumption
• Wide input voltage range
• Overcurrent protection
• Thermal shutdown protection

Package

The S-1315C1J-M5T1U3 comes in a small surface-mount package.

Essence

The essence of this product lies in its ability to provide stable voltage output despite fluctuations in the input voltage.

Packaging/Quantity

The S-1315C1J-M5T1U3 is typically packaged in reels containing a specified quantity of units, suitable for automated assembly processes.

Specifications

• Input Voltage Range: 2.0V to 6.0V
• Output Voltage: 3.3V
• Output Current: 150mA
• Dropout Voltage: 160mV (typical)
• Quiescent Current: 30μA (typical)
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-1315C1J-M5T1U3 has the following pin configuration:

1. VIN: Input voltage pin
2. GND: Ground pin
3. VOUT: Output voltage pin
4. CE: Chip enable pin

Functional Features

• Voltage regulation: The S-1315C1J-M5T1U3 ensures a stable output voltage regardless of input voltage variations.
• Overcurrent protection: The device automatically shuts down when the output current exceeds a certain threshold, protecting the circuit from damage.
• Thermal shutdown protection: In case of excessive temperature, the regulator enters a shutdown mode to prevent overheating.

Advantages and Disadvantages

Advantages

• Compact size allows for easy integration into space-constrained designs.
• High efficiency results in minimal power loss during voltage regulation.
• Wide input voltage range provides flexibility in various applications.

Disadvantages

• Limited output current capacity may not be suitable for high-power applications.
• Dropout voltage may affect the overall efficiency in low input voltage scenarios.

Working Principles

The S-1315C1J-M5T1U3 operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage, compensating for any fluctuations in the input voltage.

Detailed Application Field Plans

The S-1315C1J-M5T1U3 is commonly used in the following application fields:

1. Battery-powered devices: Portable electronic devices such as smartphones, tablets, and wearables benefit from the stable voltage supply provided by this regulator.
2. IoT devices: Internet of Things (IoT) devices often operate on low voltages and require stable power sources, making this regulator an ideal choice.
3. Industrial automation: Control systems and sensors in industrial automation equipment can rely on the S-1315C1J-M5T1U3 for consistent voltage levels.

Detailed and Complete Alternative Models

1. S-1315C1J-M5T1U2: Similar to the S-1315C1J-M5T1U3 but with a different output voltage of 2.8V.
2. S-1315C1J-M5T1U4: Similar to the S-1315C1J-M5T1U3 but with a different output voltage of 5.0V.
3. S-1315C1J-M5T1U5: Similar to the S-1315C1J-M5T1U3 but with a different output voltage of 1.8V.

These alternative models provide options for different voltage requirements in various applications.

In conclusion, the S-1315C1J-M5T1U3 is a compact and efficient voltage regulator that ensures stable power supply in electronic circuits. Its wide input voltage range, overcurrent protection, and thermal shutdown features make it suitable for a range of applications. However, its limited output current capacity and dropout voltage should be considered when selecting this regulator for high-power scenarios.