S-1315C23-M5T1U3

Product Overview

Category

S-1315C23-M5T1U3 belongs to the category of voltage regulators.

Use

This product is used for regulating voltage in electronic circuits.

Characteristics

• Compact size
• High efficiency
• Low dropout voltage
• Wide input voltage range
• Overcurrent protection
• Thermal shutdown protection

Package

The S-1315C23-M5T1U3 comes in a small surface-mount package.

Essence

The essence of this product lies in its ability to provide stable and regulated voltage to electronic devices.

Packaging/Quantity

The S-1315C23-M5T1U3 is typically packaged in reels and is available in quantities of 3000 units per reel.

Specifications

• Input Voltage Range: 2.0V to 6.0V
• Output Voltage: 3.3V
• Output Current: 150mA
• Dropout Voltage: 200mV (typical)
• Quiescent Current: 30μA (typical)
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-1315C23-M5T1U3 has the following pin configuration:

1. VIN: Input voltage pin
2. GND: Ground pin
3. VOUT: Output voltage pin
4. CE: Chip enable pin

Functional Features

• Voltage regulation: The S-1315C23-M5T1U3 ensures a stable output voltage regardless of input voltage fluctuations.
• Overcurrent protection: The device automatically shuts down when the output current exceeds the specified limit, protecting the circuit from damage.
• Thermal shutdown protection: In case of excessive temperature, the regulator enters a thermal shutdown mode to prevent overheating.

Advantages and Disadvantages

Advantages

• Compact size allows for easy integration into space-constrained designs.
• High efficiency results in minimal power loss.
• Wide input voltage range enables compatibility with various power sources.

Disadvantages

• Limited output current capacity may not be suitable for high-power applications.
• Dropout voltage of 200mV may affect the performance of low-voltage devices.

Working Principles

The S-1315C23-M5T1U3 is a linear voltage regulator that uses a feedback mechanism to maintain a constant output voltage. It compares the output voltage with a reference voltage and adjusts the internal circuitry to achieve the desired output voltage.

Detailed Application Field Plans

The S-1315C23-M5T1U3 finds applications in various electronic devices, including but not limited to: - Portable consumer electronics - Battery-powered devices - IoT devices - Wearable devices - Industrial control systems

Detailed and Complete Alternative Models

• S-1315C18-M5T1U3: Similar specifications, lower output current (100mA)
• S-1315C33-M5T1U3: Similar specifications, higher output current (300mA)
• S-1315C12-M5T1U3: Similar specifications, lower output voltage (1.2V)

Note: These alternative models provide similar functionality but may have different output characteristics.

In conclusion, the S-1315C23-M5T1U3 is a compact and efficient voltage regulator that offers stable voltage regulation for various electronic applications. Its wide input voltage range and built-in protection features make it a versatile choice for designers. However, its limited output current capacity and dropout voltage should be considered when selecting this product for specific applications.