ABLIC U.S.A. Inc.
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
S-1335E14-A4T2U3
詳細を表示 DataSheets

S-1335E14-A4T2U3

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Voltage Regulator
  • Characteristics:
    • High efficiency
    • Low power consumption
    • Compact size
  • Package: SOT-23-5
  • Essence: Step-down voltage regulator
  • Packaging/Quantity: Tape and Reel, 3000 pieces per reel

Specifications

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage Range: 0.8V to VIN
  • Output Current: 500mA (max)
  • Quiescent Current: 20µA (typ)
  • Dropout Voltage: 200mV (typ) at 100mA load
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. GND (Ground)
  2. EN (Enable)
  3. FB (Feedback)
  4. VIN (Input Voltage)
  5. VOUT (Output Voltage)

Functional Features

  • Step-down voltage regulation
  • Wide input voltage range
  • Adjustable output voltage
  • Overcurrent protection
  • Thermal shutdown protection
  • Enable pin for power management control

Advantages

  • High efficiency conversion
  • Low power consumption
  • Small form factor
  • Wide operating temperature range
  • Overcurrent and thermal protection ensure device safety
  • Enable pin allows for flexible power management

Disadvantages

  • Limited output current (500mA max)
  • Dropout voltage may affect performance in low input voltage scenarios

Working Principles

The S-1335E14-A4T2U3 is a step-down voltage regulator that converts a higher input voltage into a lower output voltage. It utilizes a switching regulator topology to achieve high efficiency conversion. The feedback pin (FB) monitors the output voltage and adjusts the duty cycle of the internal switch to maintain a stable output. The enable pin (EN) allows for power management control, enabling the device to be turned on or off as needed.

Detailed Application Field Plans

The S-1335E14-A4T2U3 is commonly used in various electronic devices that require a stable and regulated power supply. Some typical applications include: - Battery-powered devices - Portable consumer electronics - IoT devices - Industrial automation systems - Automotive electronics

Detailed and Complete Alternative Models

  1. S-1313Bxx-M5T1G: Step-down voltage regulator with higher output current capability (up to 1A).
  2. S-1312Bxx-M5T1G: Step-down voltage regulator with fixed output voltage options.
  3. S-1319x: Step-down voltage regulators with adjustable output voltage and higher input voltage range.

Note: This is not an exhaustive list, and there are several alternative models available from different manufacturers.

Word count: 320 words

技術ソリューションにおける S-1335E14-A4T2U3 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of S-1335E14-A4T2U3 in technical solutions:

  1. Q: What is S-1335E14-A4T2U3? A: S-1335E14-A4T2U3 is a specific model of voltage detector IC (integrated circuit) used in various technical solutions.

  2. Q: What is the purpose of S-1335E14-A4T2U3? A: The purpose of S-1335E14-A4T2U3 is to detect and monitor voltage levels in electronic circuits or systems.

  3. Q: How does S-1335E14-A4T2U3 work? A: S-1335E14-A4T2U3 works by continuously monitoring the voltage input and providing an output signal when the voltage exceeds or falls below a certain threshold.

  4. Q: What are the typical applications of S-1335E14-A4T2U3? A: S-1335E14-A4T2U3 is commonly used in battery-powered devices, power management systems, industrial equipment, and automotive electronics.

  5. Q: Can S-1335E14-A4T2U3 be used for overvoltage protection? A: Yes, S-1335E14-A4T2U3 can be used for overvoltage protection by triggering an alarm or shutting down the system when the voltage exceeds a predefined limit.

  6. Q: Is S-1335E14-A4T2U3 suitable for low-power applications? A: Yes, S-1335E14-A4T2U3 is designed to operate with low power consumption, making it suitable for energy-efficient devices.

  7. Q: What is the voltage detection range of S-1335E14-A4T2U3? A: The voltage detection range of S-1335E14-A4T2U3 typically varies from a few volts to several tens of volts, depending on the specific model.

  8. Q: Can S-1335E14-A4T2U3 be used in high-temperature environments? A: Yes, S-1335E14-A4T2U3 is designed to operate reliably in high-temperature environments, making it suitable for industrial and automotive applications.

  9. Q: Does S-1335E14-A4T2U3 provide any built-in protection features? A: Yes, S-1335E14-A4T2U3 often includes built-in protection features such as overcurrent protection and reverse polarity protection.

  10. Q: Are there any specific design considerations when using S-1335E14-A4T2U3? A: It is important to consider factors like input voltage range, accuracy requirements, power supply stability, and noise immunity when designing with S-1335E14-A4T2U3.

Please note that the answers provided here are general and may vary based on the specific datasheet and application guidelines provided by the manufacturer of S-1335E14-A4T2U3.