ABLIC U.S.A. Inc.
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
S-1335E29-A4T2U3
詳細を表示 DataSheets

S-1335E29-A4T2U3

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Voltage Regulator
  • Characteristics: Low dropout voltage, high accuracy, low quiescent current
  • Package: SOT-23-5
  • Essence: Regulates input voltage to a stable output voltage
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 2.5V - 6.5V
  • Output Voltage Range: 1.2V - 5.5V
  • Dropout Voltage: 200mV @ 100mA
  • Quiescent Current: 35µA (typical)
  • Load Regulation: ±0.5% (typical)
  • Line Regulation: ±0.3% (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-1335E29-A4T2U3 has a total of five pins arranged as follows: 1. VIN: Input voltage pin 2. GND: Ground pin 3. EN: Enable pin for turning the regulator on/off 4. FB: Feedback pin for setting the output voltage 5. VOUT: Output voltage pin

Functional Features

  • Low dropout voltage ensures efficient power conversion even with small input-output voltage differentials.
  • High accuracy provides precise regulation of the output voltage.
  • Low quiescent current minimizes power consumption in standby mode.
  • Built-in overcurrent protection safeguards the circuit from excessive current.

Advantages and Disadvantages

Advantages: - Compact SOT-23-5 package allows for space-saving integration into various applications. - Wide input voltage range enables compatibility with different power sources. - Excellent load and line regulation ensure stable output voltage under varying conditions.

Disadvantages: - Limited output current capability may not be suitable for high-power applications. - Requires external components (e.g., capacitors) for stable operation.

Working Principles

The S-1335E29-A4T2U3 is a linear voltage regulator that utilizes a pass transistor to regulate the input voltage to a stable output voltage. It operates by comparing the feedback voltage at the FB pin with a reference voltage, and adjusts the pass transistor accordingly to maintain the desired output voltage. The enable pin (EN) allows for on/off control of the regulator.

Detailed Application Field Plans

The S-1335E29-A4T2U3 is commonly used in various electronic devices and systems, including but not limited to: 1. Battery-powered devices: Provides regulated voltage for microcontrollers, sensors, and other low-power components. 2. Portable consumer electronics: Ensures stable power supply for smartphones, tablets, and portable audio/video players. 3. Industrial automation: Used in control systems, motor drivers, and sensor interfaces. 4. Automotive electronics: Suitable for powering infotainment systems, lighting modules, and navigation devices. 5. IoT devices: Enables efficient power management in smart home devices, wearables, and wireless sensors.

Detailed and Complete Alternative Models

  1. S-1313Bxx series: Low dropout voltage regulators with different package options.
  2. S-1701x series: Voltage detectors with built-in reset function.
  3. S-812Cxx series: CMOS voltage regulators with ultra-low quiescent current.
  4. S-19201x series: High-accuracy voltage references for precision applications.
  5. S-113x series: Low dropout voltage regulators with adjustable output voltage.

Note: This is not an exhaustive list, and there are several other alternative models available from the same manufacturer or different manufacturers.

Word count: 496 words

技術ソリューションにおける S-1335E29-A4T2U3 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of S-1335E29-A4T2U3 in technical solutions:

  1. Q: What is S-1335E29-A4T2U3? A: S-1335E29-A4T2U3 is a specific model or part number of a component used in technical solutions, such as electronic circuits.

  2. Q: What is the purpose of S-1335E29-A4T2U3? A: The purpose of S-1335E29-A4T2U3 is to perform a specific function within a technical solution, such as voltage regulation or power management.

  3. Q: How does S-1335E29-A4T2U3 work? A: S-1335E29-A4T2U3 works by receiving an input signal or voltage and regulating it to provide a stable output signal or voltage according to its specifications.

  4. Q: What are the key features of S-1335E29-A4T2U3? A: Some key features of S-1335E29-A4T2U3 may include low power consumption, high efficiency, wide input voltage range, and overcurrent protection.

  5. Q: In which applications can S-1335E29-A4T2U3 be used? A: S-1335E29-A4T2U3 can be used in various applications, including but not limited to consumer electronics, industrial automation, automotive systems, and telecommunications.

  6. Q: What are the advantages of using S-1335E29-A4T2U3 in technical solutions? A: The advantages of using S-1335E29-A4T2U3 may include improved power efficiency, better voltage regulation, protection against overcurrent, and compact size.

  7. Q: What are the specifications of S-1335E29-A4T2U3? A: The specifications of S-1335E29-A4T2U3 may include input voltage range, output voltage range, maximum current capacity, operating temperature range, and package type.

  8. Q: Are there any design considerations when using S-1335E29-A4T2U3? A: Yes, some design considerations may include proper heat dissipation, input/output capacitor selection, and ensuring compatibility with other components in the circuit.

  9. Q: Can S-1335E29-A4T2U3 be used in high-temperature environments? A: The operating temperature range of S-1335E29-A4T2U3 should be checked to ensure its suitability for high-temperature environments.

  10. Q: Where can I find more information about S-1335E29-A4T2U3? A: More information about S-1335E29-A4T2U3 can be found in the datasheet provided by the manufacturer or by contacting the manufacturer directly.

Please note that the specific questions and answers may vary depending on the context and requirements of the technical solution.