ABLIC U.S.A. Inc.
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
S-1335G16-A4T2U3
詳細を表示 DataSheets

S-1335G16-A4T2U3

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Voltage Regulator
  • Characteristics: Low Dropout, High Accuracy, Low Quiescent Current
  • Package: SOT-23-5
  • Essence: Regulates voltage to provide a stable output
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage Range: 1.2V to 5.5V
  • Output Current: 100mA
  • Dropout Voltage: 160mV @ 100mA
  • Quiescent Current: 30µA
  • Line Regulation: ±0.05% (Typical)
  • Load Regulation: ±0.2% (Typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-1335G16-A4T2U3 has a total of five pins arranged as follows: 1. VIN: Input voltage pin 2. GND: Ground pin 3. EN: Enable pin for turning the regulator on/off 4. VOUT: Output voltage pin 5. NC: No connection pin

Functional Features

  • Low dropout voltage ensures efficient power conversion even with low input voltages.
  • High accuracy provides a precise and stable output voltage.
  • Low quiescent current minimizes power consumption during standby or idle mode.
  • Enable pin allows for easy control of the regulator's operation.

Advantages and Disadvantages

Advantages: - Wide input voltage range allows for flexibility in various applications. - Small package size (SOT-23-5) enables space-saving designs. - Excellent line and load regulation ensure a stable output under varying conditions.

Disadvantages: - Limited output current of 100mA may not be suitable for high-power applications. - Dropout voltage of 160mV may cause a slight voltage drop across the regulator.

Working Principles

The S-1335G16-A4T2U3 is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It operates by comparing the reference voltage with the feedback voltage and adjusts the pass transistor accordingly to maintain a stable output voltage. The dropout voltage is the minimum voltage required for the regulator to function properly.

Detailed Application Field Plans

The S-1335G16-A4T2U3 is commonly used in various electronic devices, including but not limited to: 1. Battery-powered devices: Provides a stable voltage supply for portable electronics such as smartphones, tablets, and wearable devices. 2. IoT devices: Suitable for low-power Internet of Things (IoT) applications where energy efficiency is crucial. 3. Automotive electronics: Used in automotive systems like infotainment systems, sensors, and control modules to ensure reliable power delivery.

Detailed and Complete Alternative Models

  1. S-1313Bxx-M5T1U3: Similar voltage regulator with higher output current capability (up to 500mA).
  2. S-1133Bxx-I6T1U3: Low quiescent current voltage regulator with an input voltage range up to 18V.
  3. S-1711Bxx-U5T1U3: Ultra-low dropout voltage regulator suitable for applications requiring minimal voltage drop.

Note: This is not an exhaustive list, and there are several other alternative models available from the same manufacturer or different manufacturers.

Word count: 437 words

技術ソリューションにおける S-1335G16-A4T2U3 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of S-1335G16-A4T2U3 in technical solutions:

  1. Q: What is S-1335G16-A4T2U3? A: S-1335G16-A4T2U3 is a specific model of voltage detector IC (integrated circuit) used for monitoring power supply voltages in various electronic devices.

  2. Q: What is the purpose of using S-1335G16-A4T2U3 in technical solutions? A: The main purpose of using S-1335G16-A4T2U3 is to ensure stable and reliable operation of electronic devices by monitoring and detecting abnormal voltage levels.

  3. Q: How does S-1335G16-A4T2U3 work? A: S-1335G16-A4T2U3 continuously monitors the input voltage and compares it with pre-set threshold levels. If the voltage exceeds or falls below the thresholds, it generates an alert signal to trigger appropriate actions.

  4. Q: In which applications can S-1335G16-A4T2U3 be used? A: S-1335G16-A4T2U3 can be used in a wide range of applications such as power supplies, battery management systems, industrial equipment, automotive electronics, and consumer electronics.

  5. Q: What are the key features of S-1335G16-A4T2U3? A: Some key features of S-1335G16-A4T2U3 include low power consumption, wide operating voltage range, adjustable detection thresholds, built-in delay circuits, and compact size.

  6. Q: Can S-1335G16-A4T2U3 protect against overvoltage and undervoltage conditions? A: Yes, S-1335G16-A4T2U3 can protect against both overvoltage and undervoltage conditions by generating an alert signal when the voltage exceeds or falls below the set thresholds.

  7. Q: Is S-1335G16-A4T2U3 suitable for battery-powered devices? A: Yes, S-1335G16-A4T2U3 is suitable for battery-powered devices as it operates within a wide voltage range and consumes very low power, thus minimizing the impact on battery life.

  8. Q: Can S-1335G16-A4T2U3 be used in high-temperature environments? A: Yes, S-1335G16-A4T2U3 is designed to operate reliably in high-temperature environments, making it suitable for applications where temperature fluctuations are common.

  9. Q: Are there any specific precautions to consider when using S-1335G16-A4T2U3? A: It is important to follow the manufacturer's guidelines and datasheet recommendations for proper installation, voltage threshold settings, and ESD (electrostatic discharge) protection to ensure optimal performance.

  10. Q: Where can I find more information about S-1335G16-A4T2U3? A: You can find more detailed information about S-1335G16-A4T2U3 in the product datasheet provided by the manufacturer or by contacting their customer support team.