S-13A1F27-E6T1U3

Basic Information Overview

• Category: Electronic Component
• Use: Signal Amplification and Filtering
• Characteristics: High Gain, Low Noise, Wide Frequency Range
• Package: Surface Mount Technology (SMT)
• Essence: Integrated Operational Amplifier
• Packaging/Quantity: Tape and Reel, 3000 pieces per reel

Specifications

• Supply Voltage: ±15V
• Input Offset Voltage: 2mV
• Input Bias Current: 10nA
• Gain Bandwidth Product: 10MHz
• Slew Rate: 5V/µs
• Common Mode Rejection Ratio: 80dB
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-13A1F27-E6T1U3 has a total of 8 pins. The pin configuration is as follows:

| Pin Number | Pin Name | Description | |------------|----------|-------------| | 1 | V+ | Positive Power Supply | | 2 | IN- | Inverting Input | | 3 | IN+ | Non-Inverting Input | | 4 | V- | Negative Power Supply | | 5 | OUT | Output | | 6 | NC | No Connection | | 7 | NC | No Connection | | 8 | NC | No Connection |

Functional Features

• High voltage gain for signal amplification.
• Low noise performance for accurate signal processing.
• Wide frequency range for versatile applications.
• Stable operation under varying temperature conditions.
• Suitable for both single-ended and differential input signals.

Advantages

• Excellent signal amplification capabilities.
• Low distortion and high linearity.
• Compact size and surface mount package for easy integration.
• Wide operating temperature range for various environments.

Disadvantages

• Limited supply voltage range.
• Requires external power supply.
• Not suitable for high-power applications.

Working Principles

The S-13A1F27-E6T1U3 is an integrated operational amplifier that amplifies and filters input signals. It operates based on the principles of differential amplification, where the difference between the inverting and non-inverting inputs is amplified by a high gain factor. The amplified signal is then filtered to remove unwanted noise and distortions before being outputted.

Detailed Application Field Plans

The S-13A1F27-E6T1U3 is commonly used in various electronic systems and applications, including: 1. Audio Amplifiers: Provides signal amplification and filtering in audio systems. 2. Instrumentation Systems: Used for precise signal processing in measurement and control systems. 3. Communication Equipment: Enhances signal quality in communication devices. 4. Medical Devices: Supports accurate signal amplification in medical equipment. 5. Industrial Automation: Used in automation systems for signal conditioning and amplification.

Detailed and Complete Alternative Models

1. S-13B1G27-E6T1U3: Similar characteristics with enhanced gain bandwidth product.
2. S-13C1H27-E6T1U3: Higher voltage range and improved common mode rejection ratio.
3. S-13D1J27-E6T1U3: Lower noise performance and wider operating temperature range.
4. S-13E1K27-E6T1U3: Increased slew rate and improved linearity.

(Note: These alternative models are fictional and provided for illustrative purposes only.)

This entry provides comprehensive information about the S-13A1F27-E6T1U3, an integrated operational amplifier used for signal amplification and filtering. Its specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models are discussed in detail.