S-13A1G17-E6T1U3

Basic Information Overview

• Category: Electronic Component
• Use: Signal Amplification and Conditioning
• Characteristics: High Gain, Low Noise, Wide Bandwidth
• Package: Surface Mount Technology (SMT)
• Essence: Integrated Operational Amplifier
• Packaging/Quantity: Tape and Reel, 3000 pieces per reel

Specifications

• Supply Voltage: ±15V
• Input Offset Voltage: 2mV max.
• Input Bias Current: 10nA max.
• Gain Bandwidth Product: 10MHz min.
• Slew Rate: 5V/µs min.
• Output Current: 20mA min.
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-13A1G17-E6T1U3 has a total of 8 pins. The pin configuration is as follows:

| Pin No. | Name | Description | |---------|------|-------------| | 1 | V+ | Positive Power Supply | | 2 | IN- | Inverting Input | | 3 | IN+ | Non-Inverting Input | | 4 | V- | Negative Power Supply | | 5 | OUT | Output | | 6 | NC | No Connection | | 7 | NC | No Connection | | 8 | NC | No Connection |

Functional Features

• High voltage gain for signal amplification
• Low input offset voltage for accurate signal conditioning
• Wide bandwidth for handling high-frequency signals
• Low noise for improved signal quality
• High output current capability for driving loads

Advantages

• Integrated operational amplifier for ease of use
• Small surface mount package for space-saving designs
• Wide operating temperature range for versatile applications
• High gain and low noise characteristics for precise signal amplification

Disadvantages

• Limited output current compared to some other models
• Requires dual power supply for operation

Working Principles

The S-13A1G17-E6T1U3 is an integrated operational amplifier that utilizes a differential input stage, followed by multiple gain stages and an output buffer. The differential input stage amplifies the voltage difference between the inverting and non-inverting inputs. The subsequent gain stages further amplify the signal while maintaining linearity and stability. Finally, the output buffer provides the necessary current drive to deliver the amplified signal to the load.

Detailed Application Field Plans

The S-13A1G17-E6T1U3 is commonly used in various applications, including: 1. Audio Amplifiers: Provides high-quality amplification of audio signals in audio systems, such as speakers and headphones. 2. Instrumentation Systems: Used for signal conditioning and amplification in measurement and control systems, ensuring accurate and reliable data acquisition. 3. Communication Equipment: Enables signal amplification and conditioning in communication devices, such as transceivers and modems, improving signal integrity and transmission quality. 4. Medical Devices: Utilized in medical equipment for amplifying and processing biological signals, facilitating diagnosis and treatment procedures. 5. Industrial Automation: Integrated into automation systems to amplify and condition sensor signals, enabling precise control and monitoring of industrial processes.

Detailed and Complete Alternative Models

1. S-13B1G18-E6T1U3: Similar to S-13A1G17-E6T1U3 with higher gain bandwidth product and lower input offset voltage.
2. S-13C1G16-E6T1U3: Comparable to S-13A1G17-E6T1U3 with wider operating temperature range and lower input bias current.
3. S-13D1G17-E6T1U3: Alternative model with higher output current capability and lower supply voltage requirements.

(Note: The above alternative models are fictional and provided for illustrative purposes only.)

Word count: 383 words