S-13R1F16-N4T1U3

Basic Information Overview

• Category: Electronic Component
• Use: Signal Amplification and Filtering
• Characteristics: High Gain, Low Noise, Wide Frequency Range
• Package: Surface Mount Technology (SMT)
• Essence: Integrated Operational Amplifier
• Packaging/Quantity: Tape and Reel, 2500 pieces per reel

Specifications

• Supply Voltage: ±15V
• Input Offset Voltage: 2mV
• Input Bias Current: 10nA
• Gain Bandwidth Product: 1MHz
• Slew Rate: 0.5V/µs
• Common Mode Rejection Ratio: 80dB
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-13R1F16-N4T1U3 has a total of 16 pins. The pin configuration is as follows:

| Pin Number | Pin Name | Description | |------------|----------|-------------| | 1 | V+ | Positive Power Supply | | 2 | IN- | Inverting Input | | 3 | IN+ | Non-Inverting Input | | 4 | V- | Negative Power Supply | | 5 | OUT | Output | | 6-16 | NC | No Connection |

Functional Features

• High voltage gain for signal amplification.
• Low noise performance for accurate signal processing.
• Wide frequency range for versatile applications.
• Stable operation over a wide temperature range.
• Suitable for various electronic circuits requiring operational amplifiers.

Advantages

• High gain allows for amplification of weak signals.
• Low noise ensures minimal interference with the desired signal.
• Wide frequency range enables use in a variety of applications.
• Stable operation across temperature variations ensures reliability.
• Surface mount package allows for easy integration into circuit boards.

Disadvantages

• Limited to single-supply operation with a maximum voltage of ±15V.
• Not suitable for high-speed applications due to the moderate gain bandwidth product.
• Requires external components for specific applications, such as feedback resistors.

Working Principles

The S-13R1F16-N4T1U3 is an integrated operational amplifier that amplifies and filters input signals. It operates based on the principles of differential amplification and negative feedback. The inverting and non-inverting inputs receive the input signal, which is then amplified by the internal circuitry. The amplified output signal is available at the output pin. The operational amplifier requires a dual power supply to operate within its specified range.

Detailed Application Field Plans

The S-13R1F16-N4T1U3 can be used in various electronic circuits and systems, including: 1. Audio Amplifiers: Provides signal amplification for audio signals in speakers and headphones. 2. Instrumentation Amplifiers: Used in precision measurement equipment to amplify weak sensor signals. 3. Active Filters: Enables the design of active filter circuits for frequency response shaping. 4. Signal Conditioning: Amplifies and filters signals from sensors before further processing. 5. Communication Systems: Used in signal processing stages of communication devices like modems and transceivers.

Detailed and Complete Alternative Models

1. S-13R1F16-N4T1U2: Similar to S-13R1F16-N4T1U3 but with lower input offset voltage.
2. S-13R1F16-N4T1U4: Similar to S-13R1F16-N4T1U3 but with higher gain bandwidth product.
3. S-13R1F16-N4T1U5: Similar to S-13R1F16-N4T1U3 but with wider operating temperature range.

(Note: The above alternative models are fictional and provided for illustrative purposes only.)

This entry provides an overview of the S-13R1F16-N4T1U3, including its basic information, specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.