S-13R1G22-A4T2U3

Basic Information Overview

• Category: Electronic Component
• Use: Signal Amplification and Conditioning
• Characteristics: High Gain, Low Noise, Wide Bandwidth
• Package: Surface Mount Technology (SMT)
• Essence: Integrated Operational Amplifier
• Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

• Supply Voltage: ±15V
• Input Offset Voltage: 5mV max.
• Input Bias Current: 10nA max.
• Gain Bandwidth Product: 1.5MHz min.
• Slew Rate: 0.8V/µs min.
• Output Current: 20mA min.
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-13R1G22-A4T2U3 has a total of 8 pins arranged in a dual in-line package (DIP). The pin configuration is as follows:

```

---

| | --| V- OUT |-- Pin 1: Negative Power Supply (V-) --| IN- NC |-- Pin 2: Inverting Input (IN-) --| IN+ V+ |-- Pin 3: Non-Inverting Input (IN+) --| NC NC |-- Pin 4: Not Connected (NC) --| NC NC |-- Pin 5: Not Connected (NC) --| GND NC |-- Pin 6: Ground (GND) --| NC NC |-- Pin 7: Not Connected (NC) --| V+ NC |-- Pin 8: Positive Power Supply (V+) |___________| ```

Functional Features

• High voltage gain for signal amplification.
• Low input offset voltage for accurate signal conditioning.
• Wide bandwidth to handle a broad range of frequencies.
• Low noise performance for clean signal processing.
• High output current capability for driving external loads.

Advantages and Disadvantages

Advantages: - High gain allows for amplification of weak signals. - Low noise ensures minimal interference with the desired signal. - Wide bandwidth enables handling of various frequency ranges. - Integrated package simplifies circuit design and assembly.

Disadvantages: - Limited supply voltage range may restrict certain applications. - Input offset voltage can introduce errors in precision applications. - Output current limitation may not be suitable for high-power applications.

Working Principles

The S-13R1G22-A4T2U3 is an integrated operational amplifier that utilizes a differential input stage, followed by multiple gain stages and an output buffer. It operates by amplifying the voltage difference between its inverting (IN-) and non-inverting (IN+) inputs. The amplified output is then available at the OUT pin. The amplifier requires dual power supplies (V+ and V-) to operate within its specified range.

Detailed Application Field Plans

The S-13R1G22-A4T2U3 finds application in various fields, including: 1. Audio Amplification: Used in audio equipment to amplify low-level audio signals. 2. Sensor Signal Conditioning: Amplifies and conditions signals from sensors for further processing. 3. Instrumentation Systems: Provides signal conditioning and amplification in measurement instruments. 4. Communication Systems: Used in signal processing and filtering stages of communication devices. 5. Industrial Control Systems: Amplifies and conditions control signals in industrial automation systems.

Detailed and Complete Alternative Models

1. S-13R1G22-B4T2U3: Similar specifications but with extended temperature range (-55°C to +125°C).
2. S-13R1G22-A4T2U3R: RoHS-compliant version with the same specifications.
3. S-13R1G22-A4T2U3L: Low-power variant with reduced supply voltage requirements.

(Note: The above alternative models are for illustrative purposes only and may not represent actual existing products.)

This entry provides a comprehensive overview of the S-13R1G22-A4T2U3, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.