S-1701B3327-M5T1G
Basic Information Overview
- Category: Integrated Circuit (IC)
- Use: Voltage Regulator
- Characteristics: Low Dropout, Low Quiescent Current
- Package: SOT-23-5
- Essence: Linear Voltage Regulator
- Packaging/Quantity: Tape and Reel, 3000 pieces per reel
Specifications
- Input Voltage Range: 2.5V to 6.0V
- Output Voltage Range: 1.2V to 5.5V
- Dropout Voltage: 200mV at 150mA
- Quiescent Current: 30µA (typical)
- Load Regulation: ±0.5% (typical)
- Line Regulation: ±0.3% (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The S-1701B3327-M5T1G has a total of five pins arranged as follows: 1. VIN: Input voltage pin 2. GND: Ground pin 3. NC: No connection pin 4. VOUT: Output voltage pin 5. EN: Enable pin
Functional Features
- Low dropout voltage ensures stable output even with small input-output voltage differentials.
- Low quiescent current minimizes power consumption in standby mode.
- Excellent load and line regulation provide accurate and consistent output voltage.
- Enable pin allows for easy on/off control of the regulator.
Advantages
- Wide input voltage range enables compatibility with various power sources.
- Small package size (SOT-23-5) makes it suitable for space-constrained applications.
- Low dropout voltage ensures efficient power conversion.
- Low quiescent current prolongs battery life in portable devices.
Disadvantages
- Limited output current capability (150mA maximum).
- Not suitable for high-power applications.
Working Principles
The S-1701B3327-M5T1G is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It operates by comparing the reference voltage with the feedback voltage and adjusting the pass transistor accordingly to maintain a stable output voltage.
Detailed Application Field Plans
The S-1701B3327-M5T1G is commonly used in various electronic devices, including: - Mobile phones - Portable media players - Digital cameras - Wireless communication modules - Battery-powered devices
Detailed and Complete Alternative Models
- S-1701B3327-M5T2G: Same specifications and features as S-1701B3327-M5T1G but available in a different packaging option (SOT-23-5, 1000 pieces per reel).
- S-1701B3327-M5T3G: Same specifications and features as S-1701B3327-M5T1G but available in a different packaging option (SOT-23-5, 5000 pieces per reel).
- S-1701B3327-M5T4G: Same specifications and features as S-1701B3327-M5T1G but available in a different packaging option (SOT-23-5, 10000 pieces per reel).
This concludes the encyclopedia entry for the S-1701B3327-M5T1G voltage regulator.
技術ソリューションにおける S-1701B3327-M5T1G の適用に関連する 10 件の一般的な質問と回答をリストします。
Sure! Here are 10 common questions and answers related to the application of S-1701B3327-M5T1G in technical solutions:
Q1: What is S-1701B3327-M5T1G? A1: S-1701B3327-M5T1G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides an output signal when the voltage falls below a certain threshold.
Q2: What is the operating voltage range of S-1701B3327-M5T1G? A2: The operating voltage range of S-1701B3327-M5T1G is typically between 0.8V and 6.0V.
Q3: How does S-1701B3327-M5T1G detect voltage levels? A3: S-1701B3327-M5T1G uses a built-in voltage reference and comparator to monitor the input voltage and compare it with a preset threshold voltage.
Q4: What is the output type of S-1701B3327-M5T1G? A4: S-1701B3327-M5T1G has an open-drain output, which means it can be connected to other devices or circuits for further processing.
Q5: Can S-1701B3327-M5T1G be used in battery-powered applications? A5: Yes, S-1701B3327-M5T1G is suitable for battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.
Q6: What is the typical accuracy of the voltage detection threshold in S-1701B3327-M5T1G? A6: The typical accuracy of the voltage detection threshold in S-1701B3327-M5T1G is ±1.0%.
Q7: Can S-1701B3327-M5T1G be used for overvoltage protection? A7: No, S-1701B3327-M5T1G is designed for undervoltage detection only and does not provide overvoltage protection.
Q8: What is the response time of S-1701B3327-M5T1G? A8: The response time of S-1701B3327-M5T1G is typically 300µs, which means it can quickly detect voltage drops or fluctuations.
Q9: Is S-1701B3327-M5T1G suitable for automotive applications? A9: Yes, S-1701B3327-M5T1G is AEC-Q100 qualified, making it suitable for automotive applications that require high reliability.
Q10: Can multiple S-1701B3327-M5T1G ICs be used in parallel for redundancy? A10: Yes, multiple S-1701B3327-M5T1G ICs can be used in parallel to provide redundancy and improve system reliability by monitoring the same voltage rail.