S-1701C3026-M5T1G
Basic Information Overview
- Category: Integrated Circuit (IC)
- Use: Voltage Regulator
- Characteristics: Low Dropout, High Accuracy, Low Quiescent Current
- Package: SOT-23-5
- Essence: Linear Voltage Regulator
- Packaging/Quantity: Tape and Reel, 3000 pieces per reel
Specifications
- Input Voltage Range: 2.5V to 6.0V
- Output Voltage Range: 1.2V to 5.5V
- Dropout Voltage: 200mV at 150mA
- Line Regulation: ±0.05% typical
- Load Regulation: ±0.3% typical
- Quiescent Current: 25µA typical
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The S-1701C3026-M5T1G has a total of five pins arranged as follows: 1. VIN: Input voltage pin 2. GND: Ground pin 3. NC: No connection pin 4. VOUT: Output voltage pin 5. EN: Enable pin
Functional Features
- Low dropout voltage ensures efficient power conversion even with small input-output voltage differentials.
- High accuracy provides precise output voltage regulation.
- Low quiescent current minimizes power consumption in standby or idle mode.
- Enable pin allows for easy on/off control of the regulator.
Advantages and Disadvantages
Advantages: - Wide input voltage range enables compatibility with various power sources. - Excellent line and load regulation ensure stable output voltage under different operating conditions. - Small package size (SOT-23-5) makes it suitable for space-constrained applications. - Low quiescent current prolongs battery life in portable devices.
Disadvantages: - Limited output current capability (150mA) may not be sufficient for high-power applications. - Dropout voltage of 200mV may cause a significant power loss in low input voltage scenarios.
Working Principles
The S-1701C3026-M5T1G is a linear voltage regulator that uses a pass transistor to regulate the output voltage. When the input voltage exceeds the desired output voltage, the pass transistor conducts and regulates the output voltage to the desired level. The enable pin allows the user to turn the regulator on or off as needed.
Detailed Application Field Plans
The S-1701C3026-M5T1G is commonly used in various electronic devices and systems, including but not limited to: - Battery-powered devices such as smartphones, tablets, and portable media players. - Embedded systems and microcontroller-based projects. - Automotive electronics. - Industrial control systems. - Consumer electronics.
Detailed and Complete Alternative Models
- S-1701C3016-M5T1G: Similar specifications, but with a different package (SOT-23-5).
- S-1701C3036-M5T1G: Higher output current capability (300mA), but with slightly higher dropout voltage.
- S-1701C3046-M5T1G: Lower quiescent current (10µA), suitable for ultra-low power applications.
Note: This entry provides an overview of the S-1701C3026-M5T1G. For more detailed information, please refer to the datasheet provided by the manufacturer.
Word Count: 345
技術ソリューションにおける S-1701C3026-M5T1G の適用に関連する 10 件の一般的な質問と回答をリストします。
Sure! Here are 10 common questions and answers related to the application of S-1701C3026-M5T1G in technical solutions:
Q1: What is S-1701C3026-M5T1G? A1: S-1701C3026-M5T1G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides an output signal when the voltage falls below a certain threshold.
Q2: What is the operating voltage range of S-1701C3026-M5T1G? A2: The operating voltage range of S-1701C3026-M5T1G is typically between 0.9V and 6.0V.
Q3: How does S-1701C3026-M5T1G detect voltage levels? A3: S-1701C3026-M5T1G uses an internal voltage reference and a comparator to compare the input voltage with a preset threshold voltage.
Q4: Can S-1701C3026-M5T1G be used in battery-powered applications? A4: Yes, S-1701C3026-M5T1G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.
Q5: What is the output configuration of S-1701C3026-M5T1G? A5: S-1701C3026-M5T1G has an open-drain output configuration, which means it requires an external pull-up resistor to provide a logic-level output signal.
Q6: What is the typical accuracy of the voltage detection threshold in S-1701C3026-M5T1G? A6: The typical accuracy of the voltage detection threshold in S-1701C3026-M5T1G is ±1.0%.
Q7: Can S-1701C3026-M5T1G be used for overvoltage detection? A7: No, S-1701C3026-M5T1G is specifically designed for undervoltage detection and does not support overvoltage detection.
Q8: What is the response time of S-1701C3026-M5T1G? A8: The response time of S-1701C3026-M5T1G is typically 200µs.
Q9: Is S-1701C3026-M5T1G suitable for automotive applications? A9: Yes, S-1701C3026-M5T1G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification requirements.
Q10: Can multiple S-1701C3026-M5T1G ICs be connected in parallel to monitor different voltage levels? A10: Yes, multiple S-1701C3026-M5T1G ICs can be connected in parallel to monitor different voltage levels by using separate input pins for each IC.
Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements of S-1701C3026-M5T1G.