S-1701D5042-M5T1G

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Voltage Regulator
• Characteristics:
  • Low dropout voltage
  • High output voltage accuracy
  • Low quiescent current
  • Small package size
• Package: SOT-23-5
• Essence: Voltage regulation for electronic devices
• Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

• Input Voltage Range: 2.5V to 6.0V
• Output Voltage Range: 1.2V to 5.5V
• Dropout Voltage: 200mV (typical)
• Output Current: 150mA (maximum)
• Quiescent Current: 30µA (typical)
• Line Regulation: ±0.3% (typical)
• Load Regulation: ±0.5% (typical)
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-1701D5042-M5T1G has a total of five pins arranged as follows:

```

---

| | --| Vout | --| GND | --| Vin | --| EN | |___________| ```

• Vout: Output Voltage
• GND: Ground
• Vin: Input Voltage
• EN: Enable Pin

Functional Features

• Low dropout voltage ensures stable operation even with low input voltages.
• High output voltage accuracy provides precise voltage regulation for sensitive electronic components.
• Low quiescent current minimizes power consumption in standby mode.
• Small package size allows for space-efficient integration into compact electronic devices.

Advantages

• Wide input voltage range enables compatibility with various power sources.
• Excellent line and load regulation ensures consistent output voltage under different operating conditions.
• Low dropout voltage reduces power dissipation and extends battery life.
• Small package size facilitates integration into space-constrained designs.

Disadvantages

• Limited output current may not be suitable for high-power applications.
• Operating temperature range might restrict usage in extreme environmental conditions.

Working Principles

The S-1701D5042-M5T1G is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It operates by comparing the reference voltage with the feedback voltage from a resistive divider network connected to the output. The control circuit adjusts the pass transistor to maintain a stable output voltage, compensating for changes in input voltage and load conditions.

Detailed Application Field Plans

The S-1701D5042-M5T1G is commonly used in various electronic devices that require stable and accurate voltage regulation. Some typical application fields include: - Battery-powered devices - Portable consumer electronics - IoT (Internet of Things) devices - Embedded systems - Wearable devices

Detailed and Complete Alternative Models

• S-1701D5042-M5T1U: Same specifications and features, but available in a different package (SOT-89-5).
• S-1701D5042-M5T2G: Similar specifications and features, but with a higher output current capability (200mA).

Note: This is not an exhaustive list, and there may be other alternative models available from different manufacturers.

This entry provides comprehensive information about the S-1701D5042-M5T1G voltage regulator, including its basic overview, specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.