S-1701V5042-M5T1G

Basic Information Overview

• Category: Voltage Regulator
• Use: Regulates voltage in electronic circuits
• Characteristics: Low dropout voltage, high accuracy, low quiescent current
• Package: SOT-23-5
• Essence: Monolithic CMOS voltage regulator
• Packaging/Quantity: Tape and Reel, 3000 pieces per reel

Specifications

• Input Voltage Range: 2.5V to 6.0V
• Output Voltage Range: 1.2V to 5.5V
• Dropout Voltage: 200mV (typical)
• Quiescent Current: 30µA (typical)
• Load Regulation: ±0.5% (typical)
• Line Regulation: ±0.3% (typical)
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-1701V5042-M5T1G has a total of five pins arranged as follows: 1. VIN: Input voltage pin 2. GND: Ground pin 3. NC: No connection pin 4. VOUT: Output voltage pin 5. CE: Enable control pin

Functional Features

• Low dropout voltage ensures stable output even with small input-output voltage differentials.
• High accuracy provides precise regulation of the output voltage.
• Low quiescent current minimizes power consumption when the regulator is idle.
• Enable control allows for easy on/off switching of the regulator.

Advantages and Disadvantages

Advantages: - Compact SOT-23-5 package saves board space. - Wide input voltage range enables compatibility with various power sources. - Excellent load and line regulation ensure stable output under different operating conditions.

Disadvantages: - Limited output current capability compared to higher-power regulators. - Requires external capacitors for stability, adding to the overall component count.

Working Principles

The S-1701V5042-M5T1G is a monolithic CMOS voltage regulator that uses a feedback mechanism to maintain a stable output voltage. It compares the output voltage with a reference voltage and adjusts the internal pass transistor accordingly. This control loop ensures that the output voltage remains within the specified range even when the input voltage or load conditions change.

Detailed Application Field Plans

The S-1701V5042-M5T1G is commonly used in various electronic devices and systems, including: - Battery-powered devices: Provides regulated voltage for microcontrollers, sensors, and other low-power components. - Portable consumer electronics: Ensures stable power supply for smartphones, tablets, and portable audio/video players. - Industrial automation: Used in control circuits, motor drivers, and sensor interfaces. - Automotive electronics: Regulates voltage for infotainment systems, lighting modules, and engine control units.

Detailed and Complete Alternative Models

• S-1701V5042-M5T1U: Same specifications and features as S-1701V5042-M5T1G but available in a different packaging option (SOT-23-5L).
• S-1701V5042-M5T1R: Enhanced version with lower dropout voltage and higher accuracy.
• S-1701V5042-M5T1B: Higher current variant capable of delivering larger output currents.

(Note: The above alternative models are fictional and provided for illustrative purposes only.)

This entry provides an overview of the S-1701V5042-M5T1G voltage regulator, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.