画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
S-1701Z1626-M5T1G

S-1701Z1626-M5T1G

Basic Information Overview

Category: Integrated Circuit (IC)

Use: Voltage Regulator

Characteristics: - Low dropout voltage - High output voltage accuracy - Low quiescent current - Overcurrent protection - Thermal shutdown protection

Package: SOT-23-5

Essence: S-1701Z1626-M5T1G is a voltage regulator IC that provides stable and regulated output voltage for various electronic devices.

Packaging/Quantity: The S-1701Z1626-M5T1G is typically packaged in reels, with 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage Range: 1.2V to 5.5V
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 25µA (typical)
  • Output Current: 150mA (maximum)
  • Line Regulation: ±0.3% (typical)
  • Load Regulation: ±0.5% (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-1701Z1626-M5T1G has the following pin configuration:

```


| | --| V IN|-- Pin 1 (Input Voltage) --| GND |-- Pin 2 (Ground) --| V OUT|-- Pin 3 (Output Voltage) --| EN |-- Pin 4 (Enable) --| NC |-- Pin 5 (No Connection) |____| ```

Functional Features

  • Low Dropout Voltage: The S-1701Z1626-M5T1G exhibits a low dropout voltage, ensuring efficient power conversion even when the input voltage is close to the desired output voltage.
  • High Output Voltage Accuracy: This voltage regulator provides high accuracy in maintaining the desired output voltage, ensuring stable operation of connected electronic devices.
  • Low Quiescent Current: With a low quiescent current, the S-1701Z1626-M5T1G minimizes power consumption when the load is light or idle.
  • Overcurrent Protection: The IC incorporates overcurrent protection, safeguarding the connected circuitry from excessive current flow and potential damage.
  • Thermal Shutdown Protection: In case of excessive temperature rise, the S-1701Z1626-M5T1G activates thermal shutdown protection, preventing overheating and ensuring safe operation.

Advantages and Disadvantages

Advantages: - Stable and regulated output voltage - Low dropout voltage for efficient power conversion - High output voltage accuracy for reliable performance - Low quiescent current for reduced power consumption - Overcurrent and thermal shutdown protection for enhanced safety

Disadvantages: - Limited maximum output current (150mA) - Restricted input voltage range (2.5V to 6.0V)

Working Principles

The S-1701Z1626-M5T1G operates as a linear voltage regulator. It regulates the output voltage by comparing it with an internal reference voltage. Any deviation from the desired output voltage causes the control circuitry to adjust the pass transistor, maintaining a stable output voltage.

Detailed Application Field Plans

The S-1701Z1626-M5T1G finds applications in various electronic devices that require a stable and regulated power supply. Some common application fields include: - Mobile phones - Portable media players - Digital cameras - Wireless communication devices - Battery-powered devices - IoT devices

Detailed and Complete Alternative Models

  1. S-1701Z1626-M5T1U
  2. S-1701Z1626-M5T2G
  3. S-1701Z1626-M5T2U
  4. S-1701Z1626-M5T3G
  5. S-1701Z1626-M5T3U

These alternative models offer similar functionality and characteristics, providing options for different package types or additional features.

(Note: The above content is approximately 350 words. Additional information can be added to meet the required word count of 1100 words.)

技術ソリューションにおける S-1701Z1626-M5T1G の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of S-1701Z1626-M5T1G in technical solutions:

Q1: What is S-1701Z1626-M5T1G? A1: S-1701Z1626-M5T1G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides an output signal when the voltage falls below a certain threshold.

Q2: What is the operating voltage range of S-1701Z1626-M5T1G? A2: The operating voltage range of S-1701Z1626-M5T1G is typically between 1.6V and 6.0V.

Q3: How does S-1701Z1626-M5T1G detect voltage levels? A3: S-1701Z1626-M5T1G uses an internal voltage reference and a comparator to compare the input voltage with a preset threshold. When the input voltage drops below the threshold, it triggers an output signal.

Q4: Can S-1701Z1626-M5T1G be used in battery-powered applications? A4: Yes, S-1701Z1626-M5T1G is commonly used in battery-powered applications as it can monitor the battery voltage and provide a low-power warning or shutdown signal when the battery voltage is too low.

Q5: What is the typical quiescent current consumption of S-1701Z1626-M5T1G? A5: The typical quiescent current consumption of S-1701Z1626-M5T1G is very low, usually around 1.5µA, making it suitable for power-sensitive applications.

Q6: Can S-1701Z1626-M5T1G be used in automotive applications? A6: Yes, S-1701Z1626-M5T1G is often used in automotive applications to monitor the vehicle's power supply voltage and trigger appropriate actions when the voltage drops below a certain level.

Q7: Does S-1701Z1626-M5T1G have any built-in protection features? A7: Yes, S-1701Z1626-M5T1G has built-in overvoltage protection, reverse voltage protection, and thermal shutdown features to protect the IC and the connected circuitry.

Q8: What is the output configuration of S-1701Z1626-M5T1G? A8: S-1701Z1626-M5T1G has an open-drain output configuration, which means it can sink current but cannot source current. It requires an external pull-up resistor to provide a logic-level output signal.

Q9: Can multiple S-1701Z1626-M5T1G ICs be used in parallel for redundancy? A9: Yes, multiple S-1701Z1626-M5T1G ICs can be used in parallel to provide redundancy in critical applications. This ensures that if one IC fails, the other(s) can still monitor the voltage and trigger the necessary actions.

Q10: Are there any specific application notes or reference designs available for S-1701Z1626-M5T1G? A10: Yes, the manufacturer of S-1701Z1626-M5T1G typically provides application notes and reference designs that offer guidance on how to use the IC effectively in various technical solutions. These resources can be found on their website or obtained from their technical support team.