S-1711A2528-M6T1G
Basic Information Overview
- Category: Electronic Component
- Use: Voltage Regulator
- Characteristics: High Efficiency, Low Dropout Voltage
- Package: SOT-23
- Essence: Linear Regulator
- Packaging/Quantity: Tape and Reel, 3000 pieces per reel
Specifications
- Input Voltage Range: 2.5V to 6.5V
- Output Voltage Range: 1.2V to 5.5V
- Maximum Output Current: 150mA
- Dropout Voltage: 200mV at 100mA
- Line Regulation: ±0.2%
- Load Regulation: ±0.4%
- Quiescent Current: 50µA
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The S-1711A2528-M6T1G has three pins: 1. VIN (Pin 1): Input voltage pin. 2. VOUT (Pin 2): Output voltage pin. 3. GND (Pin 3): Ground pin.
Functional Features
- High efficiency: The S-1711A2528-M6T1G offers high efficiency, ensuring minimal power loss during voltage regulation.
- Low dropout voltage: With a low dropout voltage of 200mV at 100mA, this regulator can maintain stable output voltage even when the input voltage is close to the desired output voltage.
- Short-circuit protection: The device includes built-in short-circuit protection, preventing damage in case of a short circuit.
- Thermal shutdown: It incorporates thermal shutdown protection, which disables the regulator if the temperature exceeds the safe operating range.
Advantages and Disadvantages
Advantages: - High efficiency leads to reduced power consumption. - Low dropout voltage ensures stable output even with low input voltage. - Short-circuit and thermal shutdown protection enhance safety and reliability.
Disadvantages: - Limited maximum output current of 150mA may not be suitable for high-power applications. - Operating temperature range of -40°C to +85°C may restrict usage in extreme environments.
Working Principles
The S-1711A2528-M6T1G is a linear regulator that uses a pass transistor to regulate the output voltage. It compares the reference voltage with the feedback voltage and adjusts the pass transistor accordingly to maintain a stable output voltage. The dropout voltage is minimized by using a low resistance pass transistor.
Detailed Application Field Plans
The S-1711A2528-M6T1G can be used in various applications, including but not limited to: 1. Battery-powered devices: It can regulate the voltage for portable electronic devices such as smartphones, tablets, and wearable devices. 2. IoT devices: The low quiescent current makes it suitable for IoT applications where power efficiency is crucial. 3. Automotive electronics: With its wide operating temperature range, it can be used in automotive applications like infotainment systems, lighting controls, and sensors.
Detailed and Complete Alternative Models
- S-1711A2528-M6T1U: Similar to S-1711A2528-M6T1G, but available in a different package (SOT-89).
- S-1711A2528-M6T2G: Higher maximum output current of 300mA, suitable for applications requiring more power.
- S-1711A2528-M6T3G: Lower dropout voltage of 100mV at 100mA, ideal for applications with tight voltage requirements.
(Note: These alternative models are fictional and provided only as examples.)
This entry provides comprehensive information about the S-1711A2528-M6T1G voltage regulator. It covers its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.
技術ソリューションにおける S-1711A2528-M6T1G の適用に関連する 10 件の一般的な質問と回答をリストします。
Sure! Here are 10 common questions and answers related to the application of S-1711A2528-M6T1G in technical solutions:
Q1: What is S-1711A2528-M6T1G? A1: S-1711A2528-M6T1G is a specific model number of a component used in technical solutions, such as electronic circuits or systems.
Q2: What is the purpose of S-1711A2528-M6T1G? A2: The purpose of S-1711A2528-M6T1G is to perform a specific function within a technical solution, such as amplification, switching, or filtering.
Q3: What are the key specifications of S-1711A2528-M6T1G? A3: The key specifications of S-1711A2528-M6T1G may include parameters like voltage rating, current handling capacity, frequency response, and package type.
Q4: How can S-1711A2528-M6T1G be integrated into a technical solution? A4: S-1711A2528-M6T1G can be integrated into a technical solution by soldering it onto a printed circuit board (PCB) or using appropriate connectors, following the manufacturer's guidelines.
Q5: Can S-1711A2528-M6T1G be used in high-temperature environments? A5: The datasheet of S-1711A2528-M6T1G should provide information about its temperature range. It is important to ensure that the component is suitable for the intended operating conditions.
Q6: Are there any recommended operating conditions for S-1711A2528-M6T1G? A6: Yes, the datasheet of S-1711A2528-M6T1G should provide information about recommended operating conditions, such as voltage supply range and ambient temperature.
Q7: Can S-1711A2528-M6T1G be used in both analog and digital applications? A7: The suitability of S-1711A2528-M6T1G for analog or digital applications depends on its specific characteristics. The datasheet should provide information about its compatibility with different signal types.
Q8: Are there any alternative components to S-1711A2528-M6T1G that can be used in technical solutions? A8: There may be alternative components available with similar functionality. It is advisable to consult with the manufacturer or refer to industry resources to explore other options.
Q9: What are the potential limitations or considerations when using S-1711A2528-M6T1G? A9: Some potential limitations or considerations when using S-1711A2528-M6T1G may include power dissipation, voltage/current ratings, signal distortion, and compatibility with other components in the system.
Q10: Where can I find more detailed information about S-1711A2528-M6T1G? A10: You can find more detailed information about S-1711A2528-M6T1G in its datasheet, which is typically provided by the manufacturer. Additionally, online resources, forums, or technical communities may also have relevant information and discussions about the component.