S-1721E1830-M6T1U

Basic Information Overview

• Category: Electronic Component
• Use: Power Management
• Characteristics: High Efficiency, Low Power Consumption
• Package: SMD (Surface Mount Device)
• Essence: Voltage Regulator
• Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

• Input Voltage Range: 2.5V to 6.5V
• Output Voltage: 1.8V
• Output Current: 3A
• Dropout Voltage: 200mV at 3A
• Quiescent Current: 100μA
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-1721E1830-M6T1U has the following pin configuration:

| Pin Number | Pin Name | Description | |------------|----------|-------------| | 1 | VIN | Input Voltage | | 2 | GND | Ground | | 3 | EN | Enable Pin | | 4 | FB | Feedback Pin | | 5 | VOUT | Output Voltage |

Functional Features

• High Efficiency: The S-1721E1830-M6T1U offers high efficiency, ensuring minimal power loss during voltage regulation.
• Low Power Consumption: With a quiescent current of only 100μA, this component minimizes power consumption in standby mode.
• Fast Load Transient Response: It provides a quick response to load changes, maintaining stable output voltage even under varying loads.
• Overcurrent Protection: The device incorporates overcurrent protection, safeguarding against excessive current flow.

Advantages and Disadvantages

Advantages: - High efficiency leads to reduced power dissipation. - Low power consumption prolongs battery life. - Fast load transient response ensures stable voltage output. - Overcurrent protection prevents damage to the component.

Disadvantages: - Limited input voltage range (2.5V to 6.5V). - Dropout voltage of 200mV may affect performance in low voltage scenarios.

Working Principles

The S-1721E1830-M6T1U is a voltage regulator that maintains a constant output voltage of 1.8V, regardless of fluctuations in the input voltage. It achieves this by utilizing a feedback mechanism that compares the output voltage with a reference voltage. Any deviation from the desired output voltage is corrected by adjusting the internal circuitry, ensuring a stable and regulated output.

Detailed Application Field Plans

The S-1721E1830-M6T1U finds applications in various electronic devices where power management is crucial. Some potential application fields include: - Mobile Devices: Smartphones, tablets, and portable media players benefit from efficient power management to extend battery life. - IoT Devices: Internet of Things devices often operate on limited power sources and require precise voltage regulation. - Wearable Electronics: Fitness trackers, smartwatches, and other wearables demand compact and energy-efficient power management solutions.

Detailed and Complete Alternative Models

• S-1721E1828-M6T1U: Similar to S-1721E1830-M6T1U but with an output voltage of 1.8V and an output current of 2.8A.
• S-1721E1833-M6T1U: Similar to S-1721E1830-M6T1U but with an output voltage of 3.3V and an output current of 3A.
• S-1721E1815-M6T1U: Similar to S-1721E1830-M6T1U but with an output voltage of 1.5V and an output current of 3A.

(Note: The above alternative models are for illustrative purposes only and may not represent the complete range of alternatives available.)

This entry provides a comprehensive overview of the S-1721E1830-M6T1U, covering its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.