S-812C30BPI-C4KTFU

Product Overview

Category

S-812C30BPI-C4KTFU belongs to the category of voltage regulators.

Use

This product is commonly used for voltage regulation in electronic circuits.

Characteristics

• Voltage regulation capability
• Low dropout voltage
• High output voltage accuracy
• Low quiescent current
• Thermal shutdown protection

Package

The S-812C30BPI-C4KTFU comes in a small surface-mount package, making it suitable for compact electronic devices.

Essence

The essence of this product lies in its ability to regulate and stabilize voltage levels within electronic circuits.

Packaging/Quantity

The S-812C30BPI-C4KTFU is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

• Input Voltage Range: 2.5V - 6.0V
• Output Voltage: 3.0V
• Output Current: 100mA
• Dropout Voltage: 200mV (typical)
• Quiescent Current: 20μA (typical)
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-812C30BPI-C4KTFU has the following pin configuration:

1. VIN (Input Voltage)
2. GND (Ground)
3. VOUT (Output Voltage)

Functional Features

• Voltage Regulation: The S-812C30BPI-C4KTFU ensures a stable output voltage of 3.0V regardless of input voltage fluctuations.
• Low Dropout Voltage: With a typical dropout voltage of 200mV, this regulator can operate efficiently even when the input voltage is close to the desired output voltage.
• Low Quiescent Current: The device consumes only 20μA of current when in standby mode, minimizing power consumption.
• Thermal Shutdown Protection: The regulator includes a built-in thermal shutdown feature that protects it from overheating.

Advantages and Disadvantages

Advantages

• Precise voltage regulation
• Low power consumption
• Compact package size
• Thermal protection

Disadvantages

• Limited output current capacity (100mA)
• Restricted input voltage range (2.5V - 6.0V)

Working Principles

The S-812C30BPI-C4KTFU operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage of 3.0V. The device utilizes a low dropout voltage design, allowing it to regulate voltage efficiently even when the input voltage is close to the desired output voltage.

Detailed Application Field Plans

The S-812C30BPI-C4KTFU finds applications in various electronic devices, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Wearable devices - Embedded systems

Detailed and Complete Alternative Models

1. S-812C25BPI-C4KTFU: Similar to S-812C30BPI-C4KTFU, but with an output voltage of 2.5V.
2. S-812C33BPI-C4KTFU: Similar to S-812C30BPI-C4KTFU, but with an output voltage of 3.3V.
3. S-812C50BPI-C4KTFU: Similar to S-812C30BPI-C4KTFU, but with an output voltage of 5.0V.

These alternative models provide flexibility in choosing the appropriate output voltage for specific applications.

In conclusion, the S-812C30BPI-C4KTFU is a voltage regulator that offers precise voltage regulation, low power consumption, and thermal protection. It is commonly used in battery-powered devices, portable consumer electronics, IoT devices, wearable devices, and embedded systems. While it has limitations in terms of output current capacity and input voltage range, there are alternative models available with different output voltages to suit specific application requirements.