ABLIC U.S.A. Inc.
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
S-812C41AY-B2-U
詳細を表示 DataSheets

S-812C41AY-B2-U

Product Overview

The S-812C41AY-B2-U belongs to the category of voltage regulators and is commonly used in electronic devices to maintain a stable output voltage. This product is characterized by its compact size, high efficiency, and low power consumption. It is typically packaged in a small surface-mount package and is available in various quantities to suit different production needs.

Specifications

  • Input Voltage Range: 2.5V to 10.0V
  • Output Voltage: 1.8V
  • Maximum Output Current: 150mA
  • Dropout Voltage: 100mV @ 100mA
  • Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

The S-812C41AY-B2-U has a standard 5-pin configuration: 1. VIN (Input Voltage) 2. GND (Ground) 3. CE (Control Enable) 4. COUT (Output Capacitor) 5. VOUT (Output Voltage)

Functional Features

  • Low Standby Current: The device features a low standby current, making it suitable for battery-powered applications.
  • Overcurrent Protection: It includes overcurrent protection to safeguard connected circuits from excessive current flow.
  • Thermal Shutdown: The regulator incorporates a thermal shutdown feature to prevent damage due to overheating.

Advantages and Disadvantages

Advantages

  • Small Footprint: Its compact size makes it suitable for space-constrained designs.
  • High Efficiency: The regulator offers high efficiency, minimizing power loss.
  • Wide Input Voltage Range: It can accommodate a wide range of input voltages, enhancing its versatility.

Disadvantages

  • Limited Output Current: The maximum output current may not be sufficient for high-power applications.
  • Temperature Sensitivity: Its performance may be affected by extreme temperatures, requiring additional thermal management.

Working Principles

The S-812C41AY-B2-U operates based on the principle of linear regulation, where it adjusts the output voltage by dissipating excess power as heat. When the input voltage fluctuates, the regulator modulates the internal resistance to maintain a constant output voltage.

Detailed Application Field Plans

This voltage regulator is commonly used in portable electronic devices such as smartphones, tablets, and wearable gadgets. It is also employed in battery-powered IoT devices, sensor modules, and other low-power applications where maintaining a stable voltage is critical.

Detailed and Complete Alternative Models

  • S-812C30AY-B2-U
  • S-812C33AY-B2-U
  • S-812C35AY-B2-U
  • S-812C42AY-B2-U

In conclusion, the S-812C41AY-B2-U is a versatile voltage regulator with a compact form factor and efficient performance. Its application spans across various electronic devices, offering stability and reliability in voltage regulation.

[Word Count: 366]

技術ソリューションにおける S-812C41AY-B2-U の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the S-812C41AY-B2-U?

    • The S-812C41AY-B2-U is a voltage regulator IC manufactured by a leading semiconductor company. It is designed to provide stable power supply voltage for various electronic devices.

  2. What are the key features of the S-812C41AY-B2-U?

    • The key features include a wide input voltage range, low dropout voltage, high ripple rejection, and built-in overcurrent protection.

  3. In what technical solutions can the S-812C41AY-B2-U be used?

    • The S-812C41AY-B2-U can be used in a wide range of technical solutions including battery-powered devices, consumer electronics, industrial equipment, and automotive applications.

  4. What is the typical application circuit for the S-812C41AY-B2-U?

    • The typical application circuit includes input and output capacitors, resistors for setting the output voltage, and decoupling capacitors for stability.

  5. What is the maximum input voltage supported by the S-812C41AY-B2-U?

    • The maximum input voltage supported is typically around 16V, making it suitable for various power supply scenarios.

  6. How does the overcurrent protection feature work in the S-812C41AY-B2-U?

    • The overcurrent protection feature monitors the output current and shuts down the regulator if the current exceeds a certain threshold, protecting the connected circuitry.

  7. Can the S-812C41AY-B2-U be used in automotive applications?

    • Yes, the S-812C41AY-B2-U is suitable for automotive applications due to its wide operating temperature range and robust design.

  8. What are the advantages of using the S-812C41AY-B2-U in battery-powered devices?

    • The S-812C41AY-B2-U offers low dropout voltage, which means it can regulate the output voltage even when the input voltage is close to the output voltage, maximizing battery utilization.

  9. Are there any specific layout considerations when using the S-812C41AY-B2-U?

    • Proper PCB layout and placement of input/output capacitors are important to minimize noise and ensure stability in the voltage regulation.

  10. Where can I find detailed technical specifications and application notes for the S-812C41AY-B2-U?

    • Detailed technical specifications and application notes can be found in the product datasheet provided by the manufacturer's website or authorized distributors.