ABLIC U.S.A. Inc.
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
S-812C53BPI-C5HTFG
詳細を表示 DataSheets

S-812C53BPI-C5HTFG

Product Overview

Category

S-812C53BPI-C5HTFG belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in electronic devices for voltage regulation and power management.

Characteristics

  • Voltage regulation capabilities
  • Power management features
  • High efficiency
  • Low power consumption

Package

The S-812C53BPI-C5HTFG comes in a compact surface-mount package, making it suitable for small-sized electronic devices.

Essence

The essence of this IC lies in its ability to regulate voltage and efficiently manage power supply within electronic devices.

Packaging/Quantity

The S-812C53BPI-C5HTFG is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.0V - 5.5V
  • Maximum Output Current: 500mA
  • Quiescent Current: 30µA (typical)
  • Dropout Voltage: 100mV (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-812C53BPI-C5HTFG has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. CE: Chip enable pin
  4. VOUT: Output voltage pin
  5. NC: No connection pin

Functional Features

  • Overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection
  • Low dropout voltage
  • Fast transient response

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power consumption
  • Wide input voltage range allows for versatile applications
  • Compact package size enables use in small electronic devices
  • Built-in protection features enhance reliability

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications
  • Dropout voltage may affect performance in low input voltage scenarios

Working Principles

The S-812C53BPI-C5HTFG operates based on a voltage regulation principle. It takes an input voltage within the specified range and provides a regulated output voltage, ensuring stable power supply to connected electronic components.

Detailed Application Field Plans

The S-812C53BPI-C5HTFG finds applications in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable media players - Wearable devices - IoT devices

Detailed and Complete Alternative Models

  1. S-812C33BPI-C5HTFG
  2. S-812C23BPI-C5HTFG
  3. S-812C43BPI-C5HTFG
  4. S-812C63BPI-C5HTFG

These alternative models offer similar functionality and characteristics, providing options for different voltage and current requirements.

In conclusion, the S-812C53BPI-C5HTFG is an integrated circuit designed for voltage regulation and power management in electronic devices. Its compact size, efficiency, and built-in protection features make it suitable for a wide range of applications. However, its limitations in terms of maximum output current and dropout voltage should be considered when selecting alternative models for specific requirements.

技術ソリューションにおける S-812C53BPI-C5HTFG の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of S-812C53BPI-C5HTFG in technical solutions:

  1. Q: What is the S-812C53BPI-C5HTFG? A: The S-812C53BPI-C5HTFG is a voltage regulator IC (integrated circuit) designed for use in various technical solutions.

  2. Q: What is the input voltage range of S-812C53BPI-C5HTFG? A: The input voltage range of S-812C53BPI-C5HTFG is typically between 2.3V and 6.0V.

  3. Q: What is the output voltage of S-812C53BPI-C5HTFG? A: The output voltage of S-812C53BPI-C5HTFG can be set to various values, such as 3.3V or 5.0V, depending on the specific configuration.

  4. Q: What is the maximum output current of S-812C53BPI-C5HTFG? A: The maximum output current of S-812C53BPI-C5HTFG is typically around 150mA.

  5. Q: What is the operating temperature range of S-812C53BPI-C5HTFG? A: The operating temperature range of S-812C53BPI-C5HTFG is usually between -40°C and +85°C.

  6. Q: Can S-812C53BPI-C5HTFG be used in battery-powered applications? A: Yes, S-812C53BPI-C5HTFG can be used in battery-powered applications due to its low quiescent current and wide input voltage range.

  7. Q: Is S-812C53BPI-C5HTFG suitable for automotive applications? A: Yes, S-812C53BPI-C5HTFG is designed to meet the requirements of automotive applications, including AEC-Q100 Grade 1 qualification.

  8. Q: Does S-812C53BPI-C5HTFG have built-in protection features? A: Yes, S-812C53BPI-C5HTFG includes various protection features like overcurrent protection, thermal shutdown, and short-circuit protection.

  9. Q: Can S-812C53BPI-C5HTFG be used in space-constrained designs? A: Yes, S-812C53BPI-C5HTFG is available in a compact package (SOT-23-5) that is suitable for space-constrained designs.

  10. Q: Are there any application notes or reference designs available for S-812C53BPI-C5HTFG? A: Yes, the manufacturer provides application notes and reference designs that can help with the implementation of S-812C53BPI-C5HTFG in various technical solutions.

Please note that the specific details may vary, so it's always recommended to refer to the datasheet and documentation provided by the manufacturer for accurate information.