S-812C60BPI-C5OTFG

Product Overview

Category

S-812C60BPI-C5OTFG belongs to the category of voltage regulators.

Use

This product is commonly used for voltage regulation in electronic circuits.

Characteristics

• Voltage regulation capability
• Low dropout voltage
• High output voltage accuracy
• Thermal shutdown protection
• Overcurrent protection

Package

The S-812C60BPI-C5OTFG comes in a small surface-mount package, making it suitable for compact electronic devices.

Essence

The essence of this product lies in its ability to regulate voltage efficiently and accurately, ensuring stable power supply to electronic components.

Packaging/Quantity

The S-812C60BPI-C5OTFG is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

• Input Voltage Range: 2.5V - 6.0V
• Output Voltage: 3.3V
• Output Current: 150mA
• Dropout Voltage: 160mV (typical)
• Quiescent Current: 30µA (typical)
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-812C60BPI-C5OTFG has the following pin configuration:

1. VIN: Input voltage pin
2. GND: Ground pin
3. VOUT: Output voltage pin
4. CE: Chip enable pin

Functional Features

• Voltage regulation: The S-812C60BPI-C5OTFG ensures a stable output voltage of 3.3V regardless of input voltage fluctuations.
• Low dropout voltage: With a dropout voltage as low as 160mV, this regulator minimizes power loss and maximizes efficiency.
• Thermal shutdown protection: The device automatically shuts down when the temperature exceeds a certain threshold, preventing damage due to overheating.
• Overcurrent protection: The S-812C60BPI-C5OTFG incorporates overcurrent protection to safeguard against excessive current flow.

Advantages and Disadvantages

Advantages

• High output voltage accuracy ensures precise power supply to electronic components.
• Low dropout voltage minimizes power dissipation and improves energy efficiency.
• Thermal shutdown protection prevents damage from overheating.
• Overcurrent protection safeguards against excessive current flow.

Disadvantages

• Limited output current of 150mA may not be sufficient for high-power applications.
• Input voltage range limited to 2.5V - 6.0V may restrict compatibility with certain systems.

Working Principles

The S-812C60BPI-C5OTFG operates based on a voltage regulation principle known as a linear regulator. It compares the output voltage to a reference voltage and adjusts the internal circuitry to maintain a stable output voltage of 3.3V. By utilizing feedback control, it compensates for input voltage variations and provides a consistent power supply to connected devices.

Detailed Application Field Plans

The S-812C60BPI-C5OTFG finds application in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Embedded systems - Communication equipment

Detailed and Complete Alternative Models

1. S-812C33BPI-C5OTFG: Similar to S-812C60BPI-C5OTFG, but with an output voltage of 3.3V and a maximum output current of 300mA.
2. S-812C50BPI-C5OTFG: Similar to S-812C60BPI-C5OTFG, but with an output voltage of 5.0V and a maximum output current of 150mA.
3. S-812C33BPI-C5OTFG: Similar to S-812C60BPI-C5OTFG, but with an output voltage of 3.3V and a maximum output current of 500mA.

These alternative models offer different output voltages and current capabilities, allowing for flexibility in various applications.

In conclusion, the S-812C60BPI-C5OTFG is a voltage regulator that provides stable power supply with high accuracy and low dropout voltage. It offers thermal shutdown and overcurrent protection, making it suitable for a wide range of electronic devices. While it has limitations in terms of output current and input voltage range, there are alternative models available to cater to different requirements.