S-817A56ANB-CVTT2G
Product Overview
Category
S-817A56ANB-CVTT2G belongs to the category of voltage regulators.
Use
This product is used for regulating voltage in electronic circuits.
Characteristics
- High precision voltage regulation
- Low dropout voltage
- Low quiescent current
- Thermal shutdown protection
- Short-circuit protection
Package
The S-817A56ANB-CVTT2G comes in a small surface mount package.
Essence
The essence of this product lies in its ability to provide stable and regulated voltage output for various electronic devices.
Packaging/Quantity
The S-817A56ANB-CVTT2G is typically packaged in reels and each reel contains a specific quantity of units, usually 3000.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 5.6V
- Output Current: 50mA
- Dropout Voltage: 160mV (typical)
- Quiescent Current: 1.0µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The S-817A56ANB-CVTT2G has the following pin configuration:
- Pin 1: VIN (Input Voltage)
- Pin 2: GND (Ground)
- Pin 3: VOUT (Output Voltage)
Functional Features
- Voltage regulation: The S-817A56ANB-CVTT2G ensures a stable output voltage regardless of input voltage fluctuations.
- Low dropout voltage: This feature allows the regulator to operate even when the input voltage is close to the desired output voltage.
- Low quiescent current: The device consumes minimal current when in standby mode, conserving power.
- Thermal shutdown protection: The regulator automatically shuts down if the temperature exceeds a certain threshold, preventing damage.
- Short-circuit protection: In case of a short circuit, the device limits the current to protect itself and the connected circuitry.
Advantages and Disadvantages
Advantages
- High precision voltage regulation ensures reliable performance of electronic devices.
- Low dropout voltage allows for efficient power utilization.
- Low quiescent current helps conserve battery life.
- Thermal shutdown protection prevents overheating and potential damage.
- Short-circuit protection safeguards the device and connected components.
Disadvantages
- Limited output current may not be suitable for high-power applications.
- Narrow input voltage range restricts compatibility with certain systems.
Working Principles
The S-817A56ANB-CVTT2G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage. This is achieved through a combination of active and passive components that regulate the flow of current.
Detailed Application Field Plans
The S-817A56ANB-CVTT2G finds application in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wireless communication modules - Battery-powered devices
Detailed and Complete Alternative Models
Some alternative models that offer similar functionality to the S-817A56ANB-CVTT2G include: - S-817A50ANB-CWPT2G - S-817A33ANB-CWPT2G - S-817A25ANB-CWPT2G - S-817A18ANB-CWPT2G
These models have different output voltages and current ratings, allowing for flexibility in design and application.
Word count: 389
技術ソリューションにおける S-817A56ANB-CVTT2G の適用に関連する 10 件の一般的な質問と回答をリストします。
Sure! Here are 10 common questions and answers related to the application of S-817A56ANB-CVTT2G in technical solutions:
Q: What is the S-817A56ANB-CVTT2G? A: The S-817A56ANB-CVTT2G is a voltage detector IC (integrated circuit) manufactured by a specific company.
Q: What is the purpose of the S-817A56ANB-CVTT2G? A: The purpose of this IC is to monitor and detect voltage levels in electronic circuits or systems.
Q: What voltage range does the S-817A56ANB-CVTT2G support? A: The S-817A56ANB-CVTT2G supports a voltage range of X volts to Y volts (specific values can be provided based on the datasheet).
Q: How does the S-817A56ANB-CVTT2G provide voltage detection? A: The IC uses an internal voltage reference and comparator to compare the input voltage with a preset threshold, triggering an output when the voltage crosses that threshold.
Q: Can the S-817A56ANB-CVTT2G be used in battery-powered applications? A: Yes, the S-817A56ANB-CVTT2G can be used in battery-powered applications as it has low power consumption and operates within a wide voltage range.
Q: What is the output type of the S-817A56ANB-CVTT2G? A: The S-817A56ANB-CVTT2G provides an open-drain output, which requires an external pull-up resistor for proper operation.
Q: Is the S-817A56ANB-CVTT2G suitable for automotive applications? A: Yes, the S-817A56ANB-CVTT2G is designed to meet automotive standards and can be used in various automotive applications.
Q: Can the S-817A56ANB-CVTT2G tolerate voltage spikes or transients? A: The datasheet of the IC provides information about its ability to withstand voltage spikes or transients. It is recommended to review the datasheet for specific details.
Q: What is the operating temperature range of the S-817A56ANB-CVTT2G? A: The S-817A56ANB-CVTT2G typically operates within a temperature range of X degrees Celsius to Y degrees Celsius (specific values can be provided based on the datasheet).
Q: Are there any application notes or reference designs available for the S-817A56ANB-CVTT2G? A: Yes, the manufacturer usually provides application notes and reference designs that can help users understand and implement the IC effectively. These resources can be found on the manufacturer's website or by contacting their technical support team.
Please note that the answers provided here are general and may vary depending on the specific requirements and datasheet of the S-817A56ANB-CVTT2G.