S-817B53AMC-CXQT2G
Product Overview
Category
The S-817B53AMC-CXQT2G belongs to the category of voltage regulators.
Use
This product is primarily used for voltage regulation in electronic circuits.
Characteristics
- Low dropout voltage
- Low quiescent current
- High ripple rejection ratio
- Built-in overcurrent protection
- Thermal shutdown protection
Package
The S-817B53AMC-CXQT2G comes in a small surface-mount package.
Essence
The essence of this product lies in its ability to regulate voltage efficiently and reliably in electronic circuits.
Packaging/Quantity
The S-817B53AMC-CXQT2G is typically packaged in reels and is available in large quantities.
Specifications
- Input Voltage Range: 2.0V to 6.0V
- Output Voltage: 5.3V
- Dropout Voltage: 0.15V (typical)
- Quiescent Current: 30µA (typical)
- Ripple Rejection Ratio: 70dB (typical)
- Overcurrent Protection: Built-in
- Thermal Shutdown Protection: Built-in
Detailed Pin Configuration
The S-817B53AMC-CXQT2G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
Functional Features
- Efficient voltage regulation
- Low power consumption
- Protection against overcurrent and thermal shutdown
- High stability and reliability
Advantages
- Low dropout voltage ensures efficient power utilization
- Low quiescent current minimizes power wastage
- High ripple rejection ratio improves signal quality
- Built-in overcurrent protection safeguards the circuit
- Thermal shutdown protection prevents damage due to excessive heat
Disadvantages
- Limited input voltage range (2.0V to 6.0V)
- May not be suitable for applications requiring higher output voltages
Working Principles
The S-817B53AMC-CXQT2G operates based on the principle of a linear voltage regulator. It regulates the output voltage by adjusting the resistance in the circuit, ensuring a stable and constant voltage despite variations in the input voltage.
Detailed Application Field Plans
The S-817B53AMC-CXQT2G finds application in various electronic devices, including but not limited to:
- Mobile phones
- Portable media players
- Digital cameras
- Wireless communication devices
- Battery-powered devices
Detailed and Complete Alternative Models
- S-817A33AMC-CWPT2G
- S-817A33AMC-CXQT2G
- S-817A33AMC-DXQT2G
- S-817A33AMC-EWPT2G
- S-817A33AMC-FXQT2G
These alternative models offer similar functionality and characteristics to the S-817B53AMC-CXQT2G, with slight variations in specifications.
In conclusion, the S-817B53AMC-CXQT2G is a voltage regulator that provides efficient and reliable voltage regulation in electronic circuits. Its low dropout voltage, low quiescent current, and built-in protection features make it suitable for various applications in the electronics industry.
技術ソリューションにおける S-817B53AMC-CXQT2G の適用に関連する 10 件の一般的な質問と回答をリストします。
Sure! Here are 10 common questions and answers related to the application of S-817B53AMC-CXQT2G in technical solutions:
1. What is the S-817B53AMC-CXQT2G? - The S-817B53AMC-CXQT2G is a voltage detector IC (integrated circuit) manufactured by a specific company.
2. What is the purpose of the S-817B53AMC-CXQT2G? - The purpose of this IC is to monitor the voltage level of a power supply and provide an output signal when the voltage falls below a certain threshold.
3. What is the operating voltage range of the S-817B53AMC-CXQT2G? - The operating voltage range of this IC is typically between 1.6V and 6.0V.
4. How does the S-817B53AMC-CXQT2G detect voltage levels? - It uses an internal voltage reference and a comparator to compare the input voltage with a preset threshold.
5. What is the output format of the S-817B53AMC-CXQT2G? - The output format is typically an active-low signal, meaning it goes low when the voltage falls below the threshold.
6. Can the threshold voltage be adjusted? - No, the threshold voltage is fixed and cannot be adjusted externally.
7. What is the typical accuracy of the S-817B53AMC-CXQT2G? - The typical accuracy is around ±1.0%.
8. What is the quiescent current consumption of the S-817B53AMC-CXQT2G? - The quiescent current consumption is typically very low, usually in the microampere range.
9. Can the S-817B53AMC-CXQT2G be used in battery-powered applications? - Yes, it can be used in battery-powered applications due to its low quiescent current consumption.
10. What are some typical applications of the S-817B53AMC-CXQT2G? - Some typical applications include power supply monitoring, battery voltage monitoring, and system reset functions in various electronic devices.
Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements of the S-817B53AMC-CXQT2G.