ABLIC U.S.A. Inc.
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
S-L2980A51MC-TF-G
詳細を表示 DataSheets

S-L2980A51MC-TF-G

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Motor Driver
  • Characteristics: High current capability, low voltage drop, compact size
  • Package: Surface Mount Technology (SMT)
  • Essence: Control and drive motors efficiently
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 2.5V to 7V
  • Output Current: Up to 3A
  • Operating Temperature Range: -40°C to +125°C
  • Number of Pins: 16
  • Pin Pitch: 0.65mm

Detailed Pin Configuration

  1. VCC - Power supply input
  2. GND - Ground reference
  3. IN1 - Input 1 for motor control
  4. IN2 - Input 2 for motor control
  5. EN - Enable pin for motor driver
  6. OUT1 - Output 1 for motor connection
  7. OUT2 - Output 2 for motor connection
  8. VREF - Reference voltage for motor current sensing
  9. FAULT - Fault detection output
  10. NC - Not connected
  11. NC - Not connected
  12. NC - Not connected
  13. NC - Not connected
  14. NC - Not connected
  15. NC - Not connected
  16. NC - Not connected

Functional Features

  • Dual H-Bridge configuration for bidirectional motor control
  • Built-in protection features such as overcurrent and thermal shutdown
  • PWM (Pulse Width Modulation) control for precise speed regulation
  • Low voltage drop ensures efficient power utilization
  • Compact size allows for space-saving integration in various applications

Advantages and Disadvantages

Advantages

  • High current capability enables driving a wide range of motors
  • Low voltage drop minimizes power loss and heat generation
  • Compact size facilitates integration in space-constrained designs
  • Built-in protection features enhance system reliability

Disadvantages

  • Limited input voltage range may restrict compatibility with certain applications
  • Lack of detailed documentation for advanced configuration options

Working Principles

The S-L2980A51MC-TF-G motor driver IC operates on the principle of H-Bridge configuration. It consists of two sets of transistors that control the direction and speed of a motor. By controlling the input signals (IN1, IN2) and enable signal (EN), the IC can drive the motor forward or backward. The PWM control allows precise regulation of the motor speed by adjusting the duty cycle of the input signals.

Detailed Application Field Plans

The S-L2980A51MC-TF-G motor driver IC finds applications in various fields, including: 1. Robotics: Controlling the movement of robotic arms and wheels. 2. Automotive: Driving small motors in automotive systems such as power windows and mirrors. 3. Industrial Automation: Controlling conveyor belts, pumps, and other industrial machinery. 4. Consumer Electronics: Operating fans, small appliances, and toys. 5. IoT Devices: Enabling motor control in smart home devices and wearable electronics.

Detailed and Complete Alternative Models

  1. S-L2980A50MC-TF-G: Similar to S-L2980A51MC-TF-G but with a different pin configuration.
  2. S-L2980A52MC-TF-G: Higher current capability version of S-L2980A51MC-TF-G.
  3. S-L2980A53MC-TF-G: Lower voltage drop variant for improved power efficiency.

(Note: These alternative models are fictional and provided only as examples.)

This entry provides an overview of the S-L2980A51MC-TF-G motor driver IC, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

技術ソリューションにおける S-L2980A51MC-TF-G の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of S-L2980A51MC-TF-G in technical solutions:

  1. Q: What is the S-L2980A51MC-TF-G? A: The S-L2980A51MC-TF-G is a specific model of voltage regulator IC (integrated circuit) used for power management in various electronic devices.

  2. Q: What is the input voltage range of the S-L2980A51MC-TF-G? A: The input voltage range of the S-L2980A51MC-TF-G is typically between 2.5V and 6.5V.

  3. Q: What is the output voltage of the S-L2980A51MC-TF-G? A: The output voltage of the S-L2980A51MC-TF-G is fixed at 5.1V.

  4. Q: What is the maximum output current of the S-L2980A51MC-TF-G? A: The maximum output current of the S-L2980A51MC-TF-G is typically around 150mA.

  5. Q: Can the S-L2980A51MC-TF-G be used to power microcontrollers or other low-power digital circuits? A: Yes, the S-L2980A51MC-TF-G is suitable for powering microcontrollers, sensors, and other low-power digital circuits.

  6. Q: Is the S-L2980A51MC-TF-G a linear or switching regulator? A: The S-L2980A51MC-TF-G is a linear regulator, which means it regulates the output voltage by dissipating excess energy as heat.

  7. Q: Does the S-L2980A51MC-TF-G require any external components for operation? A: Yes, the S-L2980A51MC-TF-G typically requires input and output capacitors for stability and filtering.

  8. Q: Can the S-L2980A51MC-TF-G handle input voltages higher than 6.5V? A: No, exceeding the maximum input voltage range can damage the S-L2980A51MC-TF-G. It is important to ensure the input voltage stays within the specified range.

  9. Q: Is the S-L2980A51MC-TF-G suitable for battery-powered applications? A: Yes, the S-L2980A51MC-TF-G is commonly used in battery-powered devices due to its low dropout voltage and low quiescent current.

  10. Q: Are there any specific thermal considerations for the S-L2980A51MC-TF-G? A: Yes, the S-L2980A51MC-TF-G may require proper heat sinking or thermal management if operating at high ambient temperatures or handling high power dissipation.

Please note that the answers provided here are general and may vary depending on the specific application and datasheet of the S-L2980A51MC-TF-G.