QD Devices Inc.
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
ADP2323ACPZ-R7
詳細を表示 DataSheets

ADP2323ACPZ-R7

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Consumption
  • Package: LFCSP (Lead Frame Chip Scale Package)
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.6V to 3.3V
  • Output Current: Up to 1A
  • Quiescent Current: 30µA (typical)
  • Switching Frequency: 2MHz (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The ADP2323ACPZ-R7 has a total of 16 pins. The pin configuration is as follows:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. SS/TRK: Soft-start/Tracking pin
  6. VOUT: Output voltage pin
  7. PGND: Power ground pin
  8. SW: Switching node pin
  9. AGND: Analog ground pin
  10. COMP: Compensation pin
  11. BST: Boost pin
  12. SYNC: Synchronization pin
  13. CLKOUT: Clock output pin
  14. CLKIN: Clock input pin
  15. NC: No connection
  16. NC: No connection

Functional Features

  • High efficiency power conversion
  • Low power consumption in standby mode
  • Adjustable output voltage
  • Overcurrent protection
  • Thermal shutdown protection
  • Soft-start functionality for controlled startup

Advantages and Disadvantages

Advantages: - High efficiency results in reduced power dissipation - Wide input voltage range allows for versatile applications - Compact package size saves board space - Adjustable output voltage provides flexibility

Disadvantages: - Limited output current may not be suitable for high-power applications - Requires external components for proper operation - Sensitive to input voltage fluctuations

Working Principles

The ADP2323ACPZ-R7 is a voltage regulator IC that converts an input voltage within the range of 2.7V to 5.5V into a regulated output voltage between 0.6V and 3.3V. It utilizes a switching regulator architecture to achieve high efficiency power conversion. The internal control circuitry ensures stable output voltage despite variations in input voltage and load conditions.

Detailed Application Field Plans

The ADP2323ACPZ-R7 is commonly used in various electronic devices and systems, including but not limited to:

  1. Portable electronic devices: smartphones, tablets, portable media players
  2. Battery-powered devices: wireless headphones, fitness trackers, smartwatches
  3. IoT (Internet of Things) devices: sensors, smart home devices, wearable devices
  4. Industrial equipment: automation systems, control panels, motor drives
  5. Automotive electronics: infotainment systems, navigation systems, lighting controls

Detailed and Complete Alternative Models

  1. ADP2301: Low Dropout Linear Regulator
  2. ADP2360: Synchronous Step-Down DC-DC Converter
  3. ADP2441: High Voltage Buck Controller
  4. ADP2384: Multi-Output Power Management IC
  5. ADP2390: Dual Output Step-Down DC-DC Converter

These alternative models offer similar functionality and can be considered as substitutes for the ADP2323ACPZ-R7 depending on specific application requirements.

Word count: 446 words

技術ソリューションにおける ADP2323ACPZ-R7 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of ADP2323ACPZ-R7 in technical solutions:

  1. Q: What is ADP2323ACPZ-R7? A: ADP2323ACPZ-R7 is a voltage regulator IC (integrated circuit) that provides a regulated output voltage for various electronic devices.

  2. Q: What is the input voltage range of ADP2323ACPZ-R7? A: The input voltage range of ADP2323ACPZ-R7 is typically between 2.5V and 5.5V.

  3. Q: What is the output voltage range of ADP2323ACPZ-R7? A: ADP2323ACPZ-R7 can provide a regulated output voltage ranging from 0.6V to 3.3V.

  4. Q: What is the maximum output current of ADP2323ACPZ-R7? A: The maximum output current of ADP2323ACPZ-R7 is typically 300mA.

  5. Q: Can ADP2323ACPZ-R7 be used in battery-powered applications? A: Yes, ADP2323ACPZ-R7 can be used in battery-powered applications as it has a low quiescent current and supports low dropout voltage operation.

  6. Q: Does ADP2323ACPZ-R7 have built-in protection features? A: Yes, ADP2323ACPZ-R7 includes overcurrent protection, thermal shutdown, and undervoltage lockout features to ensure safe operation.

  7. Q: Can ADP2323ACPZ-R7 be used in automotive applications? A: Yes, ADP2323ACPZ-R7 is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.

  8. Q: What is the package type of ADP2323ACPZ-R7? A: ADP2323ACPZ-R7 comes in a small 6-lead TSOT package, which is compact and suitable for space-constrained designs.

  9. Q: Does ADP2323ACPZ-R7 require any external components for operation? A: Yes, ADP2323ACPZ-R7 requires a few external components such as input/output capacitors and resistors for voltage selection.

  10. Q: Can ADP2323ACPZ-R7 operate in a wide temperature range? A: Yes, ADP2323ACPZ-R7 can operate in a temperature range of -40°C to +125°C, making it suitable for various environmental conditions.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.