MB89695BPFM-G-183-BNDE1

Product Overview

Category

The MB89695BPFM-G-183-BNDE1 belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in electronic devices for various applications, including but not limited to automotive systems, industrial control, and consumer electronics.

Characteristics

• High performance: The MB89695BPFM-G-183-BNDE1 offers excellent speed and processing capabilities.
• Low power consumption: This IC is designed to operate efficiently with minimal power requirements.
• Compact package: It comes in a small form factor, making it suitable for space-constrained applications.
• Robust design: The IC is built to withstand harsh environmental conditions and ensure reliable operation.

Package

The MB89695BPFM-G-183-BNDE1 is typically packaged in a surface-mount package, such as a QFP (Quad Flat Package) or BGA (Ball Grid Array).

Essence

The essence of the MB89695BPFM-G-183-BNDE1 lies in its ability to provide advanced functionality and processing power within a compact and energy-efficient package.

Packaging/Quantity

The IC is usually supplied in reels or trays, depending on the manufacturer's packaging standards. The quantity per package may vary, but it is typically available in bulk quantities for industrial production.

Specifications

• Operating voltage range: 2.7V to 5.5V
• Clock frequency: Up to 50 MHz
• Number of pins: 64
• Operating temperature range: -40°C to +85°C
• Integrated peripherals: UART, SPI, I2C, ADC, PWM, etc.
• Memory: Flash memory, RAM, EEPROM, etc.

Detailed Pin Configuration

The MB89695BPFM-G-183-BNDE1 has a total of 64 pins, each serving a specific purpose. The pin configuration is as follows:

(Pin Number) (Pin Name) - (Function) 1 - VDD - Power supply voltage 2 - GND - Ground 3 - RESET - Reset signal input 4 - XTAL1 - Crystal oscillator input 5 - XTAL2 - Crystal oscillator output 6 - P0.0 - General-purpose I/O pin 7 - P0.1 - General-purpose I/O pin 8 - P0.2 - General-purpose I/O pin 9 - P0.3 - General-purpose I/O pin 10 - P0.4 - General-purpose I/O pin 11 - P0.5 - General-purpose I/O pin 12 - P0.6 - General-purpose I/O pin 13 - P0.7 - General-purpose I/O pin 14 - P1.0 - General-purpose I/O pin 15 - P1.1 - General-purpose I/O pin 16 - P1.2 - General-purpose I/O pin 17 - P1.3 - General-purpose I/O pin 18 - P1.4 - General-purpose I/O pin 19 - P1.5 - General-purpose I/O pin 20 - P1.6 - General-purpose I/O pin 21 - P1.7 - General-purpose I/O pin 22 - ...

Functional Features

The MB89695BPFM-G-183-BNDE1 offers several functional features that enhance its usability and performance in various applications:

• High-speed data processing: The IC is capable of executing complex algorithms and calculations quickly.
• Multiple communication interfaces: It supports UART, SPI, I2C, and other commonly used communication protocols.
• Analog-to-digital conversion: The integrated ADC allows for precise measurement and conversion of analog signals.
• Pulse-width modulation (PWM): This feature enables precise control of output signals with varying duty cycles.
• Flash memory: The IC incorporates non-volatile flash memory for program storage and data retention.

Advantages and Disadvantages

Advantages

• High performance and processing capabilities
• Low power consumption
• Compact form factor
• Robust design for reliable operation
• Versatile communication interfaces
• Integrated peripherals for enhanced functionality

Disadvantages

• Limited availability of alternative models from different manufacturers
• Higher cost compared to some other ICs in the same category

Working Principles

The MB89695BPFM-G-183-BNDE1 operates based on the principles of digital logic and microcontroller architecture. It executes instructions stored in its internal memory, processes input signals, and generates output signals accordingly. The IC's working principle involves a combination of hardware and software components that enable it to perform specific tasks as programmed.

Detailed Application Field Plans

The MB89695BPFM-G-183-BNDE1 finds applications in various fields, including:

1. Automotive Systems:
   • Engine control units (ECUs)