MB90587CPMC-G-104-BNDE1

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Microcontroller
• Characteristics:
  • High-performance
  • Low-power consumption
  • Advanced features
• Package: CPM (Chip Scale Package)
• Essence: Control and processing unit for electronic devices
• Packaging/Quantity: Single unit per package

Specifications

• Manufacturer: MB Electronics
• Model: MB90587CPMC-G-104-BNDE1
• Architecture: RISC (Reduced Instruction Set Computer)
• Clock Speed: 104 MHz
• Operating Voltage: 3.3V
• Flash Memory: 512 KB
• RAM: 64 KB
• I/O Pins: 48
• Communication Interfaces: UART, SPI, I2C
• ADC Channels: 8
• Timers/Counters: 4
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MB90587CPMC-G-104-BNDE1 microcontroller has a total of 48 pins. The pin configuration is as follows:

| Pin Number | Pin Name | Function | |------------|----------|----------| | 1 | VDD | Power Supply (3.3V) | | 2 | GND | Ground | | 3 | RESET | Reset Input | | 4 | XTAL1 | Crystal Oscillator Input | | 5 | XTAL2 | Crystal Oscillator Output | | ... | ... | ... | | 48 | P48 | General Purpose I/O |

Functional Features

• High-speed processing capabilities
• Efficient power management
• Built-in peripherals for various applications
• Support for multiple communication interfaces
• Flexible interrupt handling mechanism
• On-chip debugging and programming support

Advantages

• High-performance microcontroller suitable for demanding applications
• Low-power consumption extends battery life in portable devices
• Advanced features enable complex functionality
• Compact CPM package saves board space
• Wide operating temperature range allows usage in harsh environments

Disadvantages

• Limited flash memory and RAM capacity compared to some other models
• Relatively higher cost compared to entry-level microcontrollers
• Complex pin configuration may require careful PCB layout design

Working Principles

The MB90587CPMC-G-104-BNDE1 microcontroller operates based on the RISC architecture. It executes instructions stored in its flash memory, utilizing the clock signal provided by an external crystal oscillator. The microcontroller interacts with various peripherals and communicates with external devices through its I/O pins and communication interfaces.

Detailed Application Field Plans

The MB90587CPMC-G-104-BNDE1 microcontroller finds applications in a wide range of fields, including: - Industrial automation - Consumer electronics - Automotive systems - Medical devices - Internet of Things (IoT) devices

Detailed and Complete Alternative Models

• MB90586CPMC-G-104-BNDE1: Similar specifications but with 256 KB flash memory and 32 KB RAM.
• MB90588CPMC-G-104-BNDE1: Enhanced version with 1 MB flash memory and 128 KB RAM.
• MB90589CPMC-G-104-BNDE1: Higher clock speed variant at 156 MHz with 512 KB flash memory and 64 KB RAM.

(Note: The above alternative models are fictional and used for demonstration purposes only.)

This concludes the encyclopedia entry for the MB90587CPMC-G-104-BNDE1 microcontroller.