Cypress Semiconductor Corp
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MB90F034PQCR-GS-SPE2

MB90F034PQCR-GS-SPE2

Product Overview

Category: Microcontroller
Use: Embedded systems, automotive applications
Characteristics: High-performance, low-power consumption
Package: QFP (Quad Flat Package)
Essence: 16-bit microcontroller with enhanced peripheral functions
Packaging/Quantity: Tape and reel, 250 units per reel

Specifications

  • Architecture: CISC (Complex Instruction Set Computer)
  • CPU Clock Speed: 20 MHz
  • Data Bus Width: 16 bits
  • Program Memory Size: 128 KB Flash
  • RAM Size: 8 KB
  • Operating Voltage Range: 2.7V to 5.5V
  • Number of I/O Pins: 48
  • Communication Interfaces: UART, SPI, I2C
  • Analog-to-Digital Converter (ADC): 10-bit, 8 channels
  • Timers/Counters: 16-bit, 4 channels
  • PWM Outputs: 6 channels
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MB90F034PQCR-GS-SPE2 microcontroller has a total of 48 pins. The pin configuration is as follows:

  1. VDD
  2. P0_0
  3. P0_1
  4. P0_2
  5. P0_3
  6. P0_4
  7. P0_5
  8. P0_6
  9. P0_7
  10. P1_0
  11. P1_1
  12. P1_2
  13. P1_3
  14. P1_4
  15. P1_5
  16. P1_6
  17. P1_7
  18. P2_0
  19. P2_1
  20. P2_2
  21. P2_3
  22. P2_4
  23. P2_5
  24. P2_6
  25. P2_7
  26. P3_0
  27. P3_1
  28. P3_2
  29. P3_3
  30. P3_4
  31. P3_5
  32. P3_6
  33. P3_7
  34. P4_0
  35. P4_1
  36. P4_2
  37. P4_3
  38. P4_4
  39. P4_5
  40. P4_6
  41. P4_7
  42. RESET
  43. XTAL1
  44. XTAL2
  45. VSS
  46. AVDD
  47. AVSS
  48. VREF

Functional Features

  • Enhanced peripheral functions for automotive applications
  • High-performance 16-bit CPU with efficient instruction set
  • Low-power consumption for energy-efficient operation
  • Multiple communication interfaces for versatile connectivity
  • Analog-to-Digital Converter (ADC) for precise analog measurements
  • Timers/Counters and PWM outputs for accurate timing control

Advantages and Disadvantages

Advantages: - High-performance CPU enables fast processing - Enhanced peripheral functions cater to automotive requirements - Low-power consumption extends battery life - Versatile communication interfaces facilitate connectivity - Precise analog measurements with the built-in ADC - Accurate timing control with timers/counters and PWM outputs

Disadvantages: - Limited program memory size (128 KB Flash) - Limited RAM size (8 KB) - Relatively small number of I/O pins (48)

Working Principles

The MB90F034PQCR-GS-SPE2 microcontroller operates based on the CISC architecture. It executes instructions stored in its program memory to perform various tasks. The CPU clock speed determines the rate at which instructions are processed. The microcontroller interacts with external devices through its I/O pins and communication interfaces.

Detailed Application Field Plans

The MB90F034PQCR-GS-SPE2 microcontroller is widely used in automotive applications, including:

  1. Engine control units (ECUs)
  2. Transmission control units (TCUs)
  3. Body control modules (BCMs)
  4. Anti-lock braking systems (ABS)
  5. Airbag control units (ACUs)
  6. Instrument clusters
  7. Infotainment systems

These applications benefit from the microcontroller's high-performance CPU, enhanced peripheral functions, and low-power consumption.

Detailed and Complete Alternative Models

  1. MB90F034PQCR-GS-SPE1: Similar to MB90F034PQCR-GS-SPE2 but with a different package option.
  2. MB90F036PQCR-GS-SPE2: A higher-end version with additional

技術ソリューションにおける MB90F034PQCR-GS-SPE2 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of MB90F034PQCR-GS-SPE2 in technical solutions:

  1. Question: What is the MB90F034PQCR-GS-SPE2 microcontroller used for?
    Answer: The MB90F034PQCR-GS-SPE2 microcontroller is commonly used in various technical solutions, such as industrial automation, automotive electronics, and consumer electronics.

  2. Question: What is the operating voltage range of the MB90F034PQCR-GS-SPE2?
    Answer: The operating voltage range of this microcontroller is typically between 2.7V and 5.5V.

  3. Question: How much flash memory does the MB90F034PQCR-GS-SPE2 have?
    Answer: This microcontroller has 32KB of flash memory, which can be used for storing program code and data.

  4. Question: Can I use the MB90F034PQCR-GS-SPE2 for real-time control applications?
    Answer: Yes, the MB90F034PQCR-GS-SPE2 is suitable for real-time control applications due to its high-performance CPU and integrated peripherals.

  5. Question: What communication interfaces are available on the MB90F034PQCR-GS-SPE2?
    Answer: This microcontroller supports various communication interfaces, including UART, SPI, and I2C, allowing for easy integration with other devices.

  6. Question: Does the MB90F034PQCR-GS-SPE2 have any analog-to-digital converters (ADCs)?
    Answer: Yes, it has a built-in 10-bit ADC, which can be used for analog signal measurement and conversion.

  7. Question: Can I connect external memory to the MB90F034PQCR-GS-SPE2?
    Answer: Yes, this microcontroller supports external memory expansion through its address and data bus interfaces.

  8. Question: What is the maximum operating frequency of the MB90F034PQCR-GS-SPE2?
    Answer: The maximum operating frequency of this microcontroller is typically 20MHz, allowing for fast and efficient processing.

  9. Question: Is the MB90F034PQCR-GS-SPE2 suitable for low-power applications?
    Answer: Yes, this microcontroller has various power-saving features, such as multiple sleep modes and clock gating, making it ideal for low-power applications.

  10. Question: Can I program the MB90F034PQCR-GS-SPE2 using a standard development environment?
    Answer: Yes, you can program this microcontroller using popular development environments like C/C++ compilers and integrated development environments (IDEs).

Please note that the specific details and features may vary depending on the manufacturer's documentation and datasheet for the MB90F034PQCR-GS-SPE2 microcontroller.