Cypress Semiconductor Corp
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MB90F498GPMC-G-TE2

MB90F498GPMC-G-TE2

Product Overview

Category

The MB90F498GPMC-G-TE2 belongs to the category of microcontrollers.

Use

This microcontroller is designed for various applications that require high-performance computing and control capabilities.

Characteristics

  • High-performance computing capabilities
  • Advanced control features
  • Low power consumption
  • Compact size

Package

The MB90F498GPMC-G-TE2 comes in a compact package, suitable for integration into various electronic devices.

Essence

The essence of this microcontroller lies in its ability to provide efficient computing and control capabilities in a small form factor.

Packaging/Quantity

The MB90F498GPMC-G-TE2 is typically packaged individually and is available in various quantities depending on the requirements of the customer.

Specifications

  • Architecture: 16-bit
  • CPU Frequency: Up to 40 MHz
  • Flash Memory: 256 KB
  • RAM: 12 KB
  • Operating Voltage: 2.7V - 5.5V
  • I/O Ports: 52
  • Communication Interfaces: UART, SPI, I2C
  • Timers: 8-bit and 16-bit timers
  • ADC: 10-bit resolution, 8 channels

Detailed Pin Configuration

The MB90F498GPMC-G-TE2 has a total of 80 pins. The pin configuration is as follows:

  • Pins 1-20: General-purpose I/O pins
  • Pins 21-28: Analog input pins
  • Pins 29-36: Communication interface pins (UART, SPI, I2C)
  • Pins 37-44: Timer pins
  • Pins 45-52: Power supply and ground pins

Functional Features

  • High-speed processing capabilities for complex algorithms
  • Advanced control features for precise system control
  • Low power consumption for energy-efficient operation
  • Extensive I/O capabilities for versatile connectivity options
  • Built-in communication interfaces for seamless data exchange
  • Integrated timers for accurate timing control
  • Analog-to-digital converter for sensor interfacing

Advantages and Disadvantages

Advantages

  • High-performance computing capabilities
  • Compact size for easy integration into various devices
  • Versatile I/O options for flexible connectivity
  • Low power consumption for energy efficiency

Disadvantages

  • Limited RAM capacity compared to some other microcontrollers in the same category
  • Higher cost compared to entry-level microcontrollers

Working Principles

The MB90F498GPMC-G-TE2 operates based on a 16-bit architecture. It utilizes its high-speed processing capabilities to execute complex algorithms and perform precise control tasks. The microcontroller communicates with external devices through its built-in communication interfaces, allowing seamless data exchange. It also incorporates timers and an analog-to-digital converter for accurate timing control and sensor interfacing, respectively.

Detailed Application Field Plans

The MB90F498GPMC-G-TE2 is suitable for a wide range of applications, including but not limited to: - Industrial automation systems - Automotive electronics - Consumer electronics - Medical devices - Internet of Things (IoT) devices

Detailed and Complete Alternative Models

  • MB90F498GPMC-G-TE1: Similar to MB90F498GPMC-G-TE2 with slightly different pin configuration
  • MB90F498GPMC-G-TE3: Upgraded version with increased flash memory and RAM capacity
  • MB90F498GPMC-G-TE4: Enhanced model with additional communication interfaces and advanced control features

(Note: This list is not exhaustive and there may be other alternative models available in the market.)

Word count: 511 words

技術ソリューションにおける MB90F498GPMC-G-TE2 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of MB90F498GPMC-G-TE2 in technical solutions:

  1. Q: What is the MB90F498GPMC-G-TE2 microcontroller used for? A: The MB90F498GPMC-G-TE2 microcontroller is commonly used in various technical solutions, including industrial automation, motor control, and automotive applications.

  2. Q: What is the operating voltage range of the MB90F498GPMC-G-TE2? A: The MB90F498GPMC-G-TE2 operates within a voltage range of 2.7V to 5.5V.

  3. Q: How many I/O pins does the MB90F498GPMC-G-TE2 have? A: The MB90F498GPMC-G-TE2 has a total of 80 general-purpose I/O pins.

  4. Q: Can the MB90F498GPMC-G-TE2 be programmed using C language? A: Yes, the MB90F498GPMC-G-TE2 can be programmed using C language, making it easier for developers to write code for their applications.

  5. Q: Does the MB90F498GPMC-G-TE2 support real-time operating systems (RTOS)? A: Yes, the MB90F498GPMC-G-TE2 supports various RTOS options, allowing developers to implement multitasking and real-time capabilities in their applications.

  6. Q: What communication interfaces are supported by the MB90F498GPMC-G-TE2? A: The MB90F498GPMC-G-TE2 supports multiple communication interfaces, including UART, SPI, I2C, and CAN.

  7. Q: Can the MB90F498GPMC-G-TE2 control stepper motors? A: Yes, the MB90F498GPMC-G-TE2 has built-in features and peripherals that enable precise control of stepper motors.

  8. Q: Does the MB90F498GPMC-G-TE2 have analog-to-digital converters (ADC)? A: Yes, the MB90F498GPMC-G-TE2 has multiple ADC channels, allowing it to interface with analog sensors and signals.

  9. Q: Is the MB90F498GPMC-G-TE2 suitable for automotive applications? A: Yes, the MB90F498GPMC-G-TE2 is designed to meet the stringent requirements of automotive applications, including temperature and voltage ranges.

  10. Q: Can the MB90F498GPMC-G-TE2 be used in harsh industrial environments? A: Yes, the MB90F498GPMC-G-TE2 is designed to withstand harsh industrial environments, with features like robust communication interfaces and extended temperature range.

Please note that these answers are general and may vary depending on specific implementation details and requirements.